SPN4526S8RGB VBSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

FEATURES

  • TrenchFET ® Power MOSFET  1 00 % Rg and UIS Tested

APPLICATIONS

 Primary Side Switch  Isola te d DC/DC Converter Notes: a. Package limited. b. Surface mounted on 1" x 1" FR4 board. PRODUCT SUMMARY VDS (V) RDS(on) () ID (A)a Qg (Typ.) 100 0.0185 at VGS = 10 V 60 38 nC SGD Top View TO-252 N-Channel MOSFET G D S ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) Parameter Symbol Limit Unit Drain-Source V oltage VDS 100 V Gate-Source Voltage VGS ± 20 Continuous Drain Current (TJ = 150 °C) TC = 25 °C ID 60a A TC = 100 °C 45 TA = 25 °C 9.2b TA = 100 °C 6.8b Pulsed Drain Current IDM 140 Continuous Source-Drain Diode Curren t TC = 25 °C IS 60a TA = 25 °C 2b Single Pulse Avalanche Current L = 0.1 mH IAS 45 Avalanche Energy EAS 101 mJ Maximum Po wer Dissipation TC = 25 °C PD 136.4 W TC = 100 °C 68.2 TA = 25 °C 3b TA = 100 °C 1.5b Operating Junction and S torage Temperature Range TJ, Tstg - 55 to 175 °C THERMAL RESISTANCE RATINGS Parameter Symbol Typical Maxim um Unit Maximum Junction-to-Ambientb Steady State RthJA 40 50 °C/W Maximum Junction-to-C ase RthJC 0.85 1.1 N-Channel 100-V (D-S) MOSFET SPN4526S8RGB E-mail：China@VBsemi TEL:86-755-83251052 www.VBsemi.tw A ll data sheet.com

Notes: Pulse test; pulse width  300 µs, duty cycle  2 %. b. Guaranteed by design, not subject to production testing. Stresses beyond t hose listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) Parameter Symb ol Test Conditions Min. Typ. Max. Unit Static Drain-Source Breakdown Voltage VDS VGS = 0 V, ID = 250 µA 100 V VDS Temperature Coefficient VDS/TJ ID = 250 µA 110 mV/°C VGS(th) Temperature Coefficient VGS(th)/TJ - 12.5 Gate-Source Threshol d Voltage VGS(th) VDS = VGS, ID = 250 µA 2.5 5 V Gate-So urce Leakage IGSS VDS = 0 V, VGS = ± 20 V ± 100 nA Z ero Gate Voltage Drain Current IDSS VDS = 100 V, VGS = 0 V 1 µA VDS = 100 V, VGS = 0 V, TJ = 125 °C 50 On-State Drain Currenta ID(on) V DS 5 V, VGS = 10 V 50 A Drain-Source On-State Re sistancea RDS(on) VGS = 10 V, ID = 15 A 0.0185  Forward Tra nsconductancea gfs VDS = 15 V, ID = 15 A 33 S Dynamicb Input Capacitance Ciss VDS = 50 V, VGS = 0 V, f = 1 MHz 2400 pFOutput Capacitance Coss 230 Reverse Transf er Capacitance Crss 80 Total Gate Charge Qg VDS = 50 V, VGS = 10 V, ID = 50 A nCGate-So urce Charge Qgs 14 Gate-Drain Charg e Qgd Gate Resista nce Rg f = 1 MHz 1.6 2.5  Tur n-On Delay Time td(on) VDD = 50 V, RL = 1  ID  50 A, VGEN = 10 V, Rg = 1  12 20 ns Rise Time tr 10 20 Turn -Off Delay Time td(off) 18 35 Fall Time tf 81 5 Drain-Source B ody Diode Characteristics Continuous Source-Drain Diode IS TC = 25 °C 50 A Pulse Diode F orward Currenta ISM 100 Body Diode Voltage VSD IS = 15 A 0.85 1.5 V Body Diode Re verse Recovery Time t rr IF = 50 A, dI/dt = 100 A/µs, TJ = 25 °C 80 120 n s Body Diode Reverse Recovery Charge Q rr 160 240 nC Rev erse Recovery Fall Time ta 57 ns Reverse Recove ry Rise Time tb 23 SPN4526S8RGB E-mail：China@VBsemi TEL:86-755-83251052 www.VBsemi.tw A ll data sheet.com

STICS (25 °C, unless otherwise note) Output Characte ristics Transconductance On-Resistance vs. Gate-to-Source Voltage 100 012345 VDS - Drain-to- Source Voltage (V) - Drain Current (A)I D VGS =1 0V thru8V VGS =6V VGS =7V 0 1 02 03 04 05 0 ID - Drain Current (A) - Transconductance (S)gfs TC = 25 °C TC = 125 °C TC = - 55 °C 0.00 0.02 0.04 0.06 0.08 0.10 4567 8 91 0 - On-Resistance ( Ω)RDS(on) VGS - Gate-to -Source Voltage (V) TA = 25 °C TA = 150 °C ID =1 5A Transfer C haracteristics On-Resistance vs. Drain Current Capacitance 0.0 0.4 0.8 1.2 1.6 2.0 0246 8 10 VGS - Gate-to -Source Voltage (V) - Drain Current (A)I D TC = 125 °C TC = - 55 °C TC = 25 °C 0.000 0.009 0.018 0.027 0.036 0 2 04 06 0 80 100 - On-Resistance ( Ω)RDS(on) ID - Drain Current (A) VGS =1 0V Crss0 700 1400 2100 2800 3500 02 0 4 0 6 0 80 100 Coss Ciss VDS - Drain-to- Source Voltage (V) C - Capacitance (pF) SPN4526S8RGB E-mail：China@VBsemi TEL:86-755-83251052 www.VBsemi.tw A ll data sheet.com

TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Gate Charge Source- Drain Diode Forward Voltage Single Pulse Power, Junction-to-Ambient 0 2 04 06 0 80 100 ID =2 0A - Gate-to- Source Voltage (V) Qg - Total Gate C harge (nC) VGS VDS = 80 V VDS =5 0 V 8 1.0 1.2 VSD -S ource-to -Drain Voltage (V) - Source Current (A)I S 0.01 0.001 0.1 100 TJ = 25 °C TJ = 150 °C 120 180 240 300 Power (W) Time (s) 10 10000.10.010.001 1001 TA = 25 °C On-Resistance vs. Junction T emperature Threshold Voltage Single Pulse Power, Junction-to-Case 0.5 1.0 1.5 2.0 2.5 - 50 - 25 0 25 50 75 100 125 150 175 TJ -J unction Temperature (°C) (Normalized) - On-ResistanceRDS(on) ID =1 5A VGS =1 0V - 2.3 - 1.8 - 1.3 - 0.8 - 0.3 0.2 0.7 - 50 - 25 0 25 50 75 100 125 150 175 ID = 250 µA Variance (V)VGS(th) TJ - Temperature (°C) ID =5m A 100 200 300 400 500 600 1011 0 0 .00 .01 Time (s) Power (W) 0.1 TC = 25 °C SPN4526S8RGB E-mail：China@VBsemi TEL:86-755-83251052 www.VBsemi.tw A ll data sheet.com

STICS (25 °C, unless otherwise noted) The power dissipation PD is based on T J(max.) = 175 °C, using junction-to-case the r mal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. Safe Operating Area, Junction-to-Ambient Current Derating, Junction-to-Ambient 0.01 0.1 100 1000 0.1 1.0 10 100 1000 - Drain Current (A)ID VDS - Drain-to- Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified 100 ms 10 ms 1m s TA = 25 °C Single Pulse Limited byR DS(on)* 10 s 100 s, DC 10 µs, 100 µs 0 25 50 75 100 125 150 175 TA -A mbient Temperat ure (°C) ID - Drain Current (A) Safe Operating Area, Jun ction-to-Case Current Derating**, Junction-to-Case 0.01 0.1 100 1000 0.1 1.0 10 100 1000 - Drain Current (A)ID VDS - Drain-to- Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified 1m s 10 µs 100 µs TC = 25 °C Single Pulse Limited byR DS(on)* 100 ms, DC 10 ms 0 25 50 75 100 125 150 175 TC - Case Temperatu re (°C) Package Limited ID - Drain Current (A) SPN4526S8RGB E-mail：China@VBsemi TEL:86-755-83251052 www.VBsemi.tw A ll data sheet.com

TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) The power dissipation P D is based on T J(max) = 175 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. Power Derating, Junction-to-Ambient 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 25 50 75 100 125 150 175 TA -A mbient Temperat ure (°C) Power (W) Power Derating**, Junction-to-Case 100 120 140 160 180 0 25 50 75 100 125 150 175 TC - Case Temperatu re (°C) Power (W) SPN4526S8RGB E-mail：China@VBsemi TEL:86-755-83251052 www.VBsemi.tw A ll data sheet.com

STICS (25 °C, unless otherwise noted) Normalized Th ermal Transient Impedance, Junction-to-Ambient 10-3 10-2 1 10 100010-110-4 100 0.2 0.1 0.05 Square WaveP ulse Duration (s) Normalized Effective Transient Thermal Impedance 0.1 0.01 Single Pulse Notes: PDM 1. Duty Cycle, D = Per Unit Base = RthJA =5 0 ° C/W TJM -T A =P DMZthJA(t) 4. Surfac e Mounted Duty Cycl e = 0.5 0.02 Normalized Th ermal Transient Impedance, Junction-to-Case 0.1 0.01 0.2 Duty Cycl e = 0.5 Square WaveP ulse Duration (s) Normalized Effective Transient Thermal Impedance Single Pulse 0.1 10-3 10-2 110-110-4 0.02 0.05 SPN4526S8RGB E-mail：China@VBsemi TEL:86-755-83251052 www.VBsemi.tw A ll data sheet.com

All products due to improve reliability, function or design or for other reasons, product specifications and data are subject to change without notice. Taiwan VBsemi Electronics Co., Ltd., branches, agents, employees, and all persons acting on its or their representatives (collectively, the "Taiwan VBsemi"), assumes no responsibility for any errors, inaccuracies or incomplete data contained in the table or any other any disclosure of any information related to the product.(www.VBsemi.tw) Taiwan VBsemi makes no guarantee, representation or warranty on the product for any particular purpose of any goods or continuous production. To the maximum extent permitted by applicable law on Taiwan VBsemi relinquished: (1) any application and all liability arising out of or use of any products; (2) any and all liability, including but not limited to special, consequential damages or incidental ; (3) any and all implied warranties, including a particular purpose, non-infringement and merchantability guarantee. Statement on certain types of applications are based on knowledge of the product is often used in a typical application of the general product VBsemi Taiwan demand that the Taiwan VBsemi of. Statement on whether the product is suitable for a particular application is non-binding. It is the customer's responsibility to verify specific product features in the products described in the specification is appropriate for use in a particular application. Parameter data sheets and technical specifications can be provided may vary depending on the application and performance over time. All operating parameters, including typical parameters must be made by customer's technical experts validated for each customer application. Product specifications do not expand or modify Taiwan VBsemi purchasing terms and conditions, including but not limited to warranty herein. Unless expressly stated in writing, Taiwan VBsemi products are not intended for use in medical, life saving, or life sustaining applications or any other application. Wherein VBsemi product failure could lead to personal injury or death, use or sale of products used in Taiwan VBsemi such applications using client did not express their own risk. Contact your authorized Taiwan VBsemi people who are related to product design applications and other terms and conditions in writing. The information provided in this document and the company's products without a license, express or implied, by estoppel or otherwise, to any intellectual property rights granted to the VBsemi act or document. Product names and trademarks referred to herein are trademarks of their respective representatives will be all. Material Category Policy Taiwan VBsemi Electronics Co., Ltd., hereby certify that all of the products are determined to be RoHS compliant and meets the definition of restrictions under Directive of the European Parliament 2011/65 / EU, 2011 Nian. 6. 8 Ri Yue restrict the use of certain hazardous substances in electrical and electronic equipment (EEE) - modification, unless otherwise specified as inconsistent.(www.VBsemi.tw) Please note that some documents may still refer to Taiwan VBsemi RoHS Directive 2002/95 / EC. We confirm that all products identified as consistent with the Directive 2002/95 / EC European Directive 2011/65 /. Taiwan VBsemi Electronics Co., Ltd. hereby certify that all of its products comply identified as halogen-free halogen-free standards required by the JEDEC JS709A. Please note that some Taiwanese VBsemi documents still refer to the definition of IEC 61249-2-21, and we are sure that all products conform to confirm compliance with IEC 61249-2-21 standard level JS709A. SPN4526S8RGB E-mail：China@VBsemi TEL:86-755-83251052 www.VBsemi.tw A ll data sheet.com