SPN3458ST6RGB VBSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
N-Channel 60 V (D-S) MOSFET
FEATURES
- TrenchFET® power MOSFET
- 100 % Rg and UIS tested Notes a. Pulse test; pulse width 300 μs, duty cycle 2 %. b. When mounted on 1" square PCB (FR-4 material). PRODUCT SUMMARY VDS (V) 60 RDS(on) () at VGS = 10 V 0.030 RDS(on) () at VGS = 4.5 V 0.035 ID (A) 7 Configuration Single ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage VDS 60 V Gate-Source Voltage VGS ± 20 Continuous Drain Current TC = 25 °C ID A TC = 125 °C 4 Continuous Source Current (Diode Conduction) IS 6 Pulsed Drain Current a IDM 29 Single Pulse Avalanche Current L = 0.1 mH IAS 10 Single Pulse Avalanche Energy EAS 5m J Maximum Power Dissipation a TC = 25 °C PD W TC = 125 °C 1.6 Operating Junction and Storage Temper ature Range TJ, Tstg - 55 to +175 °C THERMAL RESISTANCE RATINGS PARAMETER SYMBOL LIMIT UNIT Junction-to-Ambient PCB Mount b RthJA 110 °C/W Junction-to-Foot (Drain) RthJF 30 SPN3458ST6RGB www.VBsemi.com Top View D D G D D S TSOP-6 g A ll data sheet.com
a. Pulse test; pulse w i dth 300 μs, duty cycle 2 %. b. Guaranteed by design, not subj ect to production testing. c. Independent of operating temperature. Stresses beyond those listed under “Absolute Ma ximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. SPECIFICATIONS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Brea kdown Voltage VDS VGS = 0, ID = 250 μA 60 - - V Gate-Source Threshol d Voltage VGS(th) VDS = VGS, ID = 250 μA 1.0 - 2.5 Gate-Source Leakage IGSS VDS = 0 V, VGS = ± 12 V - - ± 500 nA VDS = 0 V, VGS = ± 20 V - - ± 1 mA Zero Gate Voltag e Drain Current IDSS VGS = 0 V VDS = 60 V - - 1 μA VGS = 0 V V DS = 60 V, TJ = 125 °C - - 50 VGS = 0 V V DS = 60 V, TJ = 175 °C - - 150 On-State Drain Current a ID(on) VGS = 10 V VDS5 V 10 - - A Drain-Source On-State Resistance a RDS(on) VGS = 10 V ID = 5 A - 0.030 - VGS = 10 V ID = 5 A, TJ = 125 °C - 0.050 - VGS = 10 V I D = 5 A, TJ = 175 °C - 0.070 - VGS = 4.5 V ID = 4 A - 0.035 - Forward Transconductance a gfs VDS = 15 V, ID = 4 A - 12 - S Dynamic b Input Capacitance Ciss VGS = 0 V V DS = 30 V, f = 1 MHz - 560 700 pF Output Capacitance Coss -8 5 1 0 5 Reverse Transf er Capacitance Crss -5 5 7 0 Total Gate Charge c Qg VGS = 4.5 V V DS = 30 V, ID = 4 A -7 . 6 1 2 nC Gate-Source Charge c Qgs -2 . 1- Gate-Drain Charge c Qgd -4 . 1- Gate Resistance Rg f = 1 MHz 1.2 2.4 3.6 Turn-On D elay Time c td(on) VDD = 30 V, RL = 7.5 ID 4 A, VGEN = 10 V, Rg = 1 -9 1 4 ns Rise Time c tr -1 2 1 8 Turn-Off Delay Tim e c td(off) -1 9 2 9 Fall Time c tf -7 1 1 Source-Drain Diode Ratings and Ch aracteristics b Pulsed Current a ISM -- 2 9 A Forward Voltage VSD IF = 1.6 A, VGS = 0 - 0.75 1.2 V SPN3458ST6RGB www.VBsemi.com g A ll data sheet.com
S (TA = 25 °C, unless otherwise n oted) Output Characteristics Transconductance Capacitan ce Transfer Characteristics On-Resistance vs. Drain Current Gate Charge 0 1234 5 VGS =1 0Vt h r u5V VGS =4V VDS - Drain-to-Source Voltage (V) - Drain Current (A)I D VGS = 3 V - Transconductance (S)gfs - Drain Current (A)I D 02 468 1 0 TC = 125 °C TC = - 55 °C TC = 25 °C 0 1 02 03 04 05 06 0 200 400 600 800 1000 VDS - Drain-to-Source Voltage (V) C - Capacitance (pF) Coss Crss Ciss 012345 TC = 25 °C TC = 125 °C TC = - 55 °C VGS - Gate-to-Source Voltage (V) - Drain Current (A)I D 0.00 0.03 0.06 0.09 0.12 0.15 03 69 1 2 1 5 VGS =1 0V VGS =4 . 5V - On-Resistance (Ω)RDS(on) ID - Drain Current (A) 0 4 8 1 21 62 0 VGS - Gate-to-Source Voltage (V) Qg - Total Gate Charge (nC) VDS = 30 V ID = 4 A SPN3458ST6RGB www.VBsemi.com g A ll data sheet.com
S (TA = 25 °C, unless otherwise n oted) Gate Current vs. Gate-Source Voltage On-Resistance vs. Junction Tempera ture On-Resistance vs. Gate-Source Voltage Source-Drain Diode Forward Voltage Threshold Voltage Drain-Source Breakdown vs. Junction Temperature VGS - Gate-to-Source Voltage (V) - Gate Current (A)IGSS 10-8 10-6 10-4 10-2 10-10 0 6 12 18 24 30 TJ = 25 °C TJ = 150 °C 0.6 0.9 1.2 1.5 1.8 2.1 - 50 - 25 0 25 50 75 100 125 150 175 ID =3 . 2A VGS =1 0V TJ - Junction Temperature (°C) (Normalized)- On-ResistanceRDS(on) 0.00 0.04 0.08 0.12 0.16 0.20 012 3456789 1 0 TJ = 25 °C TJ = 150 °C - On-Resistance (Ω)RDS(on) VGS - Gate-to-Source Voltage (V) 0.01 0.001 0.1 100 TJ = 25 °C TJ = 150 °C VSD - Source-to-Drain Voltage (V) - Source Current (A)I S - 1.2 - 0.9 - 0.6 - 0.3 0.0 0.3 0.6 - 50 - 25 0 25 50 75 100 125 150 175 ID = 250 µA ID =5m A Variance (V)VGS(th) TJ - Temperature (°C) VDS - Drain-to-Source Voltage (V) TJ - Junction Temperature (°C) - 50 - 25 0 25 50 75 100 125 150 175 ID =1m A SPN3458ST6RGB www.VBsemi.com g A ll data sheet.com
THERMAL RATINGS (TA = 25 °C, unless otherwise no ted) Safe Operating Area Normal ized thermal Transient Impedance, Junction-to-Ambient 0.01 0.01 0.1 1 10010 0.1 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified ID - Drain Current (A) Limited by RDS(on)* BVDSS Limited 1 ms 10 ms 1 s, 10 s, DC 100 ms 100 μs IDM Limited TC = 25 °C Single Pulse 10-3 10-2 1 10 100010-110-4 100 0.2 0.1 0.05 Square Wave Pulse Duration (s) Normalized Effective Transient Thermal Impedance 0.1 0.01 Single Pulse Notes: PDM 1. Duty Cycle, D = 2. Per Unit Base = RthJA = 110 °C/W 3. TJM -T A =P DMZthJA(t) 4. Surface Mounted Duty Cycle = 0.5 0.02 SPN3458ST6RGB www.VBsemi.com g A ll data sheet.com
THERMAL RATINGS (TA = 25 °C, unless otherwise no ted) Normalized thermal Transient Im pedance, Junction-to-Foot Note
- The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction to Ambient (25 °C) - Normalized Transient Thermal Impedance Junction to Foot (25 °C) are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062" , double sided with 2 oz. copper, 100 % on both sides. The part ca pabilities can widely vary depending on actual application parameters and operating conditions. 0.1 0.01 0.2 Duty Cycle = 0.5 Square Wav e Pulse Duration (s) Normalized Effective Transient Thermal Impedance Single Pulse 0.1 10-3 10-2 110-110-4 0.02 0.05 SPN3458ST6RGB www.VBsemi.com g A ll data sheet.com
All products due to improve re liability, function or design or for other reasons, product specifications and data are subject to change w ithout notice. Taiwan VBsemi Electronics Co. , Ltd., branches, agents, employees, and all persons acting on its or their representatives (collecti vely, the "Taiwan VBsemi"), assumes no responsibility for any errors, inaccuracies or incomplete data containe d in the table or any other any disclosure of any information related to the product.(www.VBsemi.com) Taiwan VBsemi makes no guaran tee, representation or warranty on the product for any particular purpose of any goods or continuous pro duction. To the maximum extent permitted by applicable law on Taiwan VBsemi relinquished: (1) any appl ication and all liability arising out of or use of any products; (2) any and all liability, including but not limited to special, consequential damages or incidental ; (3) any and all implied warranties, including a particular pur pose, non-infringement and merchantability guarantee. Statement on certain types of applications are based on knowledge of the product is often used in a typical application of the general product VBsemi Taiwan demand that the Taiwan VBsemi of. Statement on whether the product is suitable for a pa rticular application is non-binding. It is the customer's responsibility to verify specific product features in the produ cts described in the specification is appropriate for use in a particular application. Parameter data sheets and t echnical specifications can be provided may vary depending on the application and performance over time. All op erating parameters, including typical parameters must be made by customer's technical experts validat ed for each customer application. Product specifications do not expand or modify Taiwan VBsemi purchasing terms and conditions, including but not limited to warranty herein. Unless expressly stated in writing, Taiwan VBsemi products are not intended for use in medical, life saving, or life sustaining applic ations or any other application. Wherein VBsemi product failure could lead to personal injury or death, use or sale of products used in Taiwan VBsemi such applications using client did not express their own risk. Contact your auth orized Taiwan VBsemi people who are related to product design applications and other terms and condition s in writing. The information provided in this document and the company's products without a license, express or implied, by estoppel or otherwise, t o any intellectual property rights granted to the VBsemi act or document. Product names and trademarks referred to herein are trademarks of their respective representatives will be all. MaterialCategoryPolicy Taiwan VBsemi Electronics C o., Ltd., hereby certify that all of the products are determined to be oHS compliant and meets th e definition of restrictions under Directive of the European Parliament 2011/65 / EU, 2011 Nian. 6. 8 Ri Yue restrict the use of certain hazardous substances in electrical and electronicequipment(EEE)-m odification,unlessotherwisespecifiedasinconsistent.(www.VBsemi.com) Pleasenotethatsomedocume ntsmaystillrefertoTaiwanVBsemiRoHSDirective2002/95/EC.We confirm that all products ide ntified as consistent with the Directive 2002/95 / EC European Directive 2011/65/. Taiwan VBsemi Electronics Co ., Ltd. hereby certify that all of its products comply identified as halogen-free halogen-free sta ndards required by the JEDEC JS709A. Please note that some Taiwanese VBsemi documents still refe r to the definition of IEC 61249-2-21, and we are sure that all products conformtoconfirmcomplianc ewithIEC61249-2-21standardlevelJS709A. SPN3458ST6RGB www.VBsemi.com A ll data sheet.com