SBT-QFE-3008 IRONWOOD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Wide temperature range (-55C to +180C).
  • High current capability (up to 4A).
  • Excellent signal integrity at high frequencies.
  • Low and stable contact resistance for reliable production yield.
  • Highly compliant to accommodate wide co-planarity variations.
  • Automated probe manufacturing enables low cost and short lead time. TOP VIEW SIDE VIEW Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. Description: SBT-QFE100SE 0.5mm Pitch 16-16mm T-T with 1W heatsink Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. STATUS: Released REV. A DATE: 10/14/2015 Material: Finish: Weight: SBT-QFE-3008 Drawing SCALE: 2:1 SHEET: 1 OF 7 ENG: S. Faiz FILE: SBT-QFE-3008 Dwg DRAWN BY: M. Raske

20.725 20.725 1.700±0.100 THRU ALL (x4) 0.850±0.025 THRU ALL (x2) 0.250 4.6125 * 2.6625 12.00 12.00 15.40 15.40 2.54 0.50 6.00 6.00 2.54 24.6 SOCKET OUTLINE 24.6 SOCKET OUTLINE 1.250 (x4) 1.250 (x4) A 0.50 1.250 0.30 DETAIL A SCALE 12 : 1 NOTE: QFE pattern is not symmetrical with respect to the mounting holes! Target PCB Recommendations Total thickness: 1.6mm min. Plating: Gold or Solder finish PCB Pad height: same or higher than solder mask Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. Description: Recommended PCB layout Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. STATUS: Released REV. A DATE: 10/14/2015 Material: Finish: Weight: SBT-QFE-3008 Drawing SCALE: 3:1 SHEET: 2 OF 7 ENG: S. Faiz FILE: SBT-QFE-3008 Dwg DRAWN BY: M. Raske

16.0 14.00 16.0 14.00 0.50 0.220 0.13 0.50 Ironwood Package Code : QFE100SE Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. Description: Compatible IC Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. STATUS: Released REV. A DATE: 10/14/2015 Material: Finish: Weight: SBT-QFE-3008 Drawing SCALE: 5:1 SHEET: 3 OF 7 ENG: S. Faiz FILE: SBT-QFE-3008 Dwg DRAWN BY: M. Raske

B DETAIL B SCALE 16 : 1 PIN USER INSTRUCTIONS: Place QFE100 pacakge in the socket and make sure that the leads are sitting inside the slots of the guide (item#5). Place compression plate (item#13). Place swivel socket lid. Apply 0.6 lbf-in (6.8 newton-cm) of torque on compression screw (item#15). Place heatsink (item#18) into compression screw (item#15) and fasten with 0-80 screws (item#19) and washers (item#20). ITEM NO. DESCRIPTION Material

1 Dowel pin, 1/32" X 1/4", SS Stainless Steel (18-8)

2 #0-80 Shoulder Screw, 1.59mm thread length Stainless Steel (303) 3 #0-80 X .625 LG, SOC HD CAP SCREW, ALLOY STL, BLK OXIDE Alloy Steel 4 #0-80X0.25", 90 deg., head pin guide screw, Peek material PEEK unfilled

5 CBT-QFE100SE Floating spring pin guide Semitron MDS 100

6 Middle guide QFE100SE 16x16mm T-T Semitron MDS 100

7 Bottom CBT pin guide QFE100SE; 0.5mm pitch Semitron MDS 100

8 Socket Base 18mm 7075-T6 Aluminum Alloy

9 QFE100SE chip

10 Floating Guide Spring Alloy Steel (SS)

11 IC Guide, QFE100SE 16x16mm tip-tip TECAPEEK CMF Ceramic

12 QFE100SE test PCB Material <not specified>

13 Compresion Plate QFE100SE 16mm tip-tip

0.25mm shift PEEK Ceramic filled

14 Socket Lid with threads for 0-80 screw 7075-T6 Aluminum Alloy

15 Compression Screw M10 with 4.25mm dia hole 7075-T6 (SN)

16 Insulation Plate 18x18mm IC FR4 Standard

17 Backing Plate 18mm IC 7075-T6 Alumium Alloy

19 #0-80 X .313 LG, SOC HD CAP SCREW, ALLOY STL, BLK OXIDE Alloy Steel 20 Single wave washer for 0-80 screw 0.072" ID, 0.170" OD 0.050" overall height SS 21 Stamped Pin, 0.4mm SBT-BGA N/A Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. Description: socket exploded view, Pin Det Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. STATUS: Released REV. A DATE: 10/14/2015 Material: Finish: Weight: SBT-QFE-3008 Drawing SCALE: 1.5:1 SHEET: 4 OF 7 ENG: S. Faiz FILE: SBT-QFE-3008 Dwg DRAWN BY: M. Raske

ITEM NO. Description Material

1 IC Guide, QFE100SE 16x16mm tip-tip TECAPEEK CMF Ceramic filled

2 CBT-QFE100SE Floating spring pin guide Semitron MDS 100

3 Middle guide QFE100SE 16x16mm T-T Semitron MDS 100

4 Bottom CBT pin guide QFE100SE; 0.5mm pitch Semitron MDS 100

5 QFE100SE chip

6 Dowel pin, 1/32" X 1/4", SS Stainless Steel (18-8)

7 #0-80 Shoulder Screw, 1.59mm thread length Stainless Steel (303)

8 Compresion Plate QFE100SE 16mm tip-tip

0.25mm shift PEEK Ceramic filled

9 Socket Lid with threads for 0-80 screw 7075-T6 Aluminum Alloy

10 Compression Screw M10 with 4.25mm dia hole 7075-T6 (SN) 11 #0-80X0.25", 90 deg., head pin guide screw, Peek material PEEK unfilled 12 1W heatsink Copper 13 #0-80 X .313 LG, SOC HD CAP SCREW, ALLOY STL, BLK OXIDE Alloy Steel 14 Single wave washer for 0-80 screw 0.072" ID, 0.170" OD 0.050" overall height

15 Floating Guide Spring Alloy Steel (SS)

16 Stamped Pin, 0.4mm SBT-BGA N/A

17 Nut, #0-80, SS Stainless Steel (18-8)

18 Washer, #0 x .025", Nylon Nylon 6/6 19 #0-80 X .625 LG, SOC HD CAP SCREW, ALLOY STL, BLK OXIDE Alloy Steel

20 Socket Base 18mm 7075-T6 Aluminum Alloy

21 QFE100SE test PCB Material <not specified>

Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. Description: SBT-QFE100SE 0.5mm Pitch 16-16mm T-T with 1W heatsink Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. STATUS: Released REV. A DATE: 10/14/2015 Material: Finish: Weight: SBT-QFE-3008 Drawing SCALE: 2:1 SHEET: 5 OF 7 ENG: S. Faiz FILE: SBT-QFE-3008 Dwg DRAWN BY: M. Raske

25.725 25.725 20.725 20.725 7.00 (x4) 15.94 (x4) R0.80 6.00 6.00 1.27 (x4) 7.94 1.59 24.90 FRONT VIEW Socket with 0.120" thick target PCB. #0-80 5/8" long cap, socket head screw TOP VIEW Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. Description: Insulation plate/Backing plate Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. STATUS: Released REV. A DATE: 10/14/2015 Material: Finish: Weight: SBT-QFE-3008 Drawing SCALE: 2.5:1 SHEET: 6 OF 7 ENG: S. Faiz FILE: SBT-QFE-3008 Dwg DRAWN BY: M. Raske©2015 Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com

15.50 15.50 1.250 1.50 1.00 3.00 3.00 1.00 7.50 6.00 7.75 5.75 Spring pin locations Do NOT locate vias on the target board in these locations Contact Ironwood for details if necessary Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. Description: Spring pin location Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. STATUS: Released REV. A DATE: 10/14/2015 Material: Finish: Weight: SBT-QFE-3008 Drawing SCALE: 5:1 SHEET: 7 OF 7 ENG: S. Faiz FILE: SBT-QFE-3008 Dwg DRAWN BY: M. Raske©2015 Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com