SBT-BGA-6502

SBT-BGA-6502 IRONWOOD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

Wide temperature range (-55C to +180C)• High current capability (up to 4A)• Excellent signal integrity at high frequencies• Low and stable contact resistance for reliable production yield• Highly compliant to accommodate wide co-planarity variations• Automated probe manufacturing enables low cost and short • lead time SBT-BGA DIRECT MOUNT, SOLDERLESS SOCKET FOR BURN-IN AND TEST APPLICATIONS Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. Description: SBT-BGA Socket, 15 X 15, 0.8mm, 17 X 17 Array Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. STATUS: Released REV. E DATE: 03/29/2011 Material: ERROR!:Material Finish: ERROR!:Finish Weight: 21.18 SBT-BGA-6502 Drawing SCALE: 3:1 SHEET: 1 OF 5 ENG: S. Faiz FILE: SBT-BGA-6502 Dwg DRAWN BY: M. Raske

20.600±0.125 Socket Base 20.225±0.125 Socket Base 22.73 Backing Plate 5.08 2.54 0.85±0.025 (2) Alignment Hole 1.71±0.05 (4) Mounting Hole

0.43 Pad (289)

2.463 2.838

0.80 TYP

12.80 1.25±0.125 1.25±0.125 17.725 21.08 Bottom Guide

21.45 Bottom Guide

Target PCB Recommendations Total thickness: 1.6mm min. Plating: Gold or Solder finish PCB Pad height: Same or higher than solder mask *Note: BGA pattern is not symmetrical with respect to the mounting holes. Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. Description: SBT-BGA Socket, 15 X 15, 0.8mm, 17 X 17 Array Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. STATUS: Released REV. E DATE: 03/29/2011 Material: ERROR!:Material Finish: ERROR!:Finish Weight: 21.18 SBT-BGA-6502 Drawing SCALE: 4:1 SHEET: 2 OF 5 ENG: S. Faiz FILE: SBT-BGA-6502 Dwg DRAWN BY: M. Raske

E D b e

0.15 M Z X Y

0.08 M Z

X Y A A DETAIL A SCALE 12 : 1 0.02 Z 0.20 Z Z Dimensions are in millimeters.1. Interpret dimensions and tolerances per ASME Y14.5M-1994.2. Dimension b is measured at the maximum solder ball diameter, parallel to datum plane Z.3. Datum Z (seating plane) is defined by the spherical crowns of the solder balls.4. Parallelism measurement shall exclude any effect of mark on top surface of package.5.

17 X 17 array

Ironwood Package Code: BGA289D DIM Minimum Maximum A 2.5 A1 0.2 0.34 b 0.45 D 15.0 BSC E 15.0 BSC e 0.80 BSC Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. Description: SBT-BGA Socket, 15 X 15, 0.8mm, 17 X 17 Array Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. STATUS: Released REV. E DATE: 03/29/2011 Material: ERROR!:Material Finish: ERROR!:Finish Weight: 21.18 SBT-BGA-6502 Drawing SCALE: 2:1 SHEET: 3 OF 5 ENG: S. Faiz FILE: SBT-BGA-6502 Dwg DRAWN BY: M. Raske

22.73 17.73 5.08 7.00 2.54 1.75 0.85 14.95 1.59 INSULATION PLATE DETAIL ITEM NO. DESCRIPTION Material

1 Socket Base SBT BGA 15x15mm

0.375 SFT 7075-T6 Aluminum Alloy

2 Socket Lid, 15mm 7075-T6 Alumium Alloy

3 Compression Plate, 15mm x 15mm 7075-T6 Aluminum Alloy

4 Compression Screw M10 7075-T6 Alumium Alloy

5 Insulation Plate FR4

6 Bottom Guide BGA289, 15mm,

0.8mm pitch, 17x17 array Semitron MDS 100 7 Floating Guide 15mmsq. 0.8mm 17x17array Semitron MDS 100 8 Middle Pogo Guide 15mm 0.8mm 17x17 array Semitron MDS 100

9 SBT/CBT Ni Plated 15mm Backing

Plate 7075-T6 Alumium Alloy 10 BGA196 ,0.8mm Pitch FR4

11 Target PCB BGA289 17x17array

15mmx15mm 0.8mm pitch FR4 High temp 12 SBT Pin, SBT-BGA 0.5mm-0.8mm 13 #0-80 X .625 LG, SOC HD CAP SCREW, ALLOY STL, BLK OXIDE Alloy Steel

14 Floating Guide Spring Alloy Steel (SS)

#0-80, 90 deg., head pin guide screw, Peek material 5.5715mm overall Length PEEK unfilled

16 Dowel pin, 1/32" X 1/4", SS Stainless Steel (18-8)

17 #0-80 Shoulder Screw, 0.062" thread length Stainless Steel (303) Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. Description: SBT-BGA Socket, 15 X 15, 0.8mm, 17 X 17 Array Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. STATUS: Released REV. E DATE: 03/29/2011 Material: ERROR!:Material Finish: ERROR!:Finish Weight: 21.18 SBT-BGA-6502 Drawing SCALE: 3:1 SHEET: 4 OF 5 ENG: S. Faiz FILE: SBT-BGA-6502 Dwg DRAWN BY: M. Raske

Rev Date Initials Description A 3/29/11 MR Original B 4/19/13 SF Revised Compression screw. C 9/24/13 GL Added feet (1mm bosses) to Socket Base D 02/19/14 DH Changed current rating of pin E 03/04/15 RP/MR P-P196A was P-P149A, R3200 was R1391 Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. Description: Revision History Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. STATUS: Released REV. E DATE: 03/29/2011 Material: Finish: Weight: SBT-BGA-6502 Drawing SCALE: 3:1 SHEET: 5 OF 5 ENG: S. Faiz FILE: SBT-BGA-6502 Dwg DRAWN BY: M. Raske