S19212BXXA

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 58

Technical content

www.sii-ic.com FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR © SII Semiconductor Corporation, 2015-2017 Rev.5.1_00 The S-19212B/DxxA Series, developed by using high-withstand voltage CMOS process technology, is a positive voltage regulator with a high-withstand voltage, low current consum ption and high-accuracy output voltage, and has a built-in ON / OFF circuit. The S-19212B/DxxA Series operates at the maximum operation voltage of 36 V and a low current consumption of 6.5 μA typ., and has a built-in low on-resistance output transisto r which provides a very small dropout voltage and a large output current. Also, a built-in overcurrent protection circuit to limit overcu rrent of the output transistor and a built-in thermal shutdown circuit to limit heat are included. Caution This product can be used in vehicle equipment and in-vehicle equipment. Before using the product in the purpose, contact to SII Semiconductor Corporation is indispensable.  Features

• Output voltage: 2.5 V to 16.0 V, selectable in 0.1 V step
• Input voltage: 3.0 V to 36 V
• Output voltage accuracy: ±2.0% (Tj = −40°C to +125°C)
• Current consumption: During operation: 6.5 μA typ., 8.5 μA max. (Tj = −40°C to +125°C) During power-off: 0.1 μA typ., 3.5 μA max. (Tj = −40°C to +125°C)
• Output current: Possible to output 250 mA (at V IN ≥ VOUT(S) + 2.0 V)*1
• Input capacitor: A ceramic capacitor can be used. (1.0 μF or more)
• Output capacitor: A ceramic capacitor can be used. (1.0 μF to 100 μF)
• Built-in overcurrent protection circuit: Limits overcurrent of output transistor.
• Built-in thermal shutdown circuit: Detection temperature 165 °C typ.
• Built-in ON / OFF circuit: Ensures long battery life.
• Built-in discharge shunt circ uit: Discharges the electric charge of the output capacitor during power-off. (R LOW = 70 kΩ typ.)
• Operation temperature range: Ta = −40°C to +125°C
• Lead-free (Sn 100%), halogen-free
• Withstand 45 V load dump
• AEC-Q100 qualified*2 *1. Please make sure that the loss of the IC will not exceed the power dissipation when t he output current is large. *2. Contact our sales o ffice for details.  Applications
• Constant-voltage power supply for electrical application for vehicle interior
• Constant-voltage power supply for home electric appliance
• For automotive use (engine, transmission, suspension, ABS, related-devices for EV / HEV / PHEV, etc.)  Packages
• TO-252-5S(A)
• HSOP-8A
• HSOP-6
• SOT-89-5
• HTMSOP-8
• SOT-23-5

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR S-19212B/DxxA Series Rev.5.1_00  Block Diagram Reference voltage circuit ON / OFF ON / OFF circuit VIN VSS VOUT Overcurrent protection circuit Thermal shutdown circuit *1. Parasitic diode *2. The ON / OFF circuit controls the in ternal circuit and the output transistor. Figure 1

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series  AEC-Q100 Qualified This IC supports AEC-Q100 for operation temperature grade 1. Contact our sales office for details of AEC-Q100 reliability specification.  Product Name Structure Users can select the output voltage and package type for the S-19212B/D xxA Series. Refer to " 1. Product name " regarding the contents of product name, " 2. Function list of product types " regarding the product type, "3. Packages " regarding the package drawings and " 4. Product name list " for details of product names. 1. Product name S-19212 x xx A - xxxx U Package abbreviation and IC packing specifications*1 V5T2: TO-252-5S(A), Tape E8T1: HSOP-8A, Tape E6T1: HSOP-6, Tape U5T1: SOT-89-5, Tape S8T1: HTMSOP-8, Tape M5T1: SOT-23-5, Tape Operation temperature A: Ta = −40°C to +125°C Set output voltage 25 to G0 (e.g., when the set output voltage is 2.5 V, it is expressed as 25. when the set output voltage is 10. 0 V, it is expressed as A0. when the set output voltage is 11. 0 V, it is expressed as B0. when the set output voltage is 16. 0 V, it is expressed as G0.) Product type B, D Environmental code U: Lead-free (Sn 100%), halogen-free *1. Refer to the tape drawing. *2. Refer to " 2. Function list of product types " and "3. ON / OFF pin " in " Operation". 2. Function list of product types Table 1 Product Type ON / OFF Logic ON / OFF pin input voltage "H" ON / OFF pin input voltage "L" B Active "H" 1.5 V min. 0.25 V max. D Active "H" 2.0 V min. 0.8 V max.

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR S-19212B/DxxA Series Rev.5.1_00 3. Packages Table 2 Package Drawing Codes Package Name Dimension Tape Reel Land TO-252-5S(A) VA005-A-P-SD VA005-A-C-SD VA005-A-R-SD VA005-A-L-SD HSOP-8A FH008-A-P-SD FH008-A-C-SD FH008-A-R-SD FH008-A-L-SD HSOP-6 FH006-A-P-SD FH006-A-C-SD FH006-A-R-S1 − SOT-89-5 UP005-A-P-SD UP00 5-A-C-SD UP005-A-R-SD − HTMSOP-8 FP008-A-P-SD FP008-A-C-SD FP008-A-R-SD FP008-A-L-SD SOT-23-5 MP005-A-P-SD MP005-A-C-SD MP005-A-R-SD − 4. Product name list 4. 1 S-19212B/DxxA Series B type ON / OFF logic: Active "H" ON / OFF pin input voltage "H" (V SH) = 1.5 V min., ON / OFF pin input voltage "L" (V SL) = 0.25 V max. Table 3 Output Voltage TO-252-5S(A) HSOP-8A HSOP-6 SOT-89-5 HTMSOP-8 SOT-23-5 2.5 V ± 2.0% S-19212B25A-V5T2U S-19212B25A-E8T1U S-19212B25A-E6T1U S-19212B25A-U5T1U S-19212B25A-S8T1U S-19212B25A-M5T1U 3.0 V ± 2.0% S-19212B30A-V5T2U S-19212B30A-E8T1U S-19212B30A-E6T1U S-19212B30A-U5T1U S-19212B30A-S8T1U S-19212B30A-M5T1U 3.3 V ± 2.0% S-19212B33A-V5T2U S-19212B33A-E8T1U S-19212B33A-E6T1U S-19212B33A-U5T1U S-19212B33A-S8T1U S-19212B33A-M5T1U 5.0 V ± 2.0% S-19212B50A-V5T2U S-19212B50A-E8T1U S-19212B50A-E6T1U S-19212B50A-U5T1U S-19212B50A-S8T1U S-19212B50A-M5T1U 5.5 V ± 2.0% S-19212B55A-V5T2U S-19212B55A-E8T1U S-19212B55A-E6T1U S-19212B55A-U5T1U S-19212B55A-S8T1U S-19212B55A-M5T1U 6.0 V ± 2.0% S-19212B60A-V5T2U S-19212B60A-E8T1U S-19212B60A-E6T1U S-19212B60A-U5T1U S-19212B60A-S8T1U S-19212B60A-M5T1U 7.0 V ± 2.0% S-19212B70A-V5T2U S-19212B70A-E8T1U S-19212B70A-E6T1U S-19212B70A-U5T1U S-19212B70A-S8T1U S-19212B70A-M5T1U 8.0 V ± 2.0% S-19212B80A-V5T2U S-19212B80A-E8T1U S-19212B80A-E6T1U S-19212B80A-U5T1U S-19212B80A-S8T1U S-19212B80A-M5T1U 9.0 V ± 2.0% S-19212B90A-V5T2U S-19212B90A-E8T1U S-19212B90A-E6T1U S-19212B90A-U5T1U S-19212B90A-S8T1U S-19212B90A-M5T1U 10.5 V ± 2.0% S-19212BA5A-V5T2U S-19212BA5A-E8T1U S-19212BA5A-E6T1U S-19212BA5A-U5T1U S-19212BA5A-S8T1U S-19212BA5A-M5T1U 12.0 V ± 2.0% S-19212BC0A-V5T2U S-19212BC0A-E8T1U S-19212BC0A-E6T1U S-19212BC0A-U5T1U S-19212BC0A-S8T1U S-19212BC0A-M5T1U 12.5 V ± 2.0% S-19212BC5A-V5T2U S-19212BC5A-E8T1U S-19212BC5A-E6T1U S-19212BC5A-U5T1U S-19212BC5A-S8T1U S-19212BC5A-M5T1U 15.0 V ± 2.0% S-19212BF0A-V5T2U S-19212BF0A-E8T1U S-19212BF0A-E6T1U S-19212BF0A-U5T1U S-19212BF0A-S8T1U S-19212BF0A-M5T1U Remark Please contact our sales office for products with specifications other than the above output voltage. 4. 2 S-19212B/DxxA Series D type ON / OFF logic: Active "H" ON / OFF pin input voltage "H" (V SH) = 2.0 V min., ON / OFF pin input voltage "L" (V SL) = 0.8 V max. Table 4 Output Voltage TO-252-5S(A) HSOP-8A HSOP-6 SOT-89-5 HTMSOP-8 SOT-23-5 2.5 V ± 2.0% S-19212D25A-V5T2U S-19212D25A-E8T1U S-19212D25A-E 6T1U S-19212D25A-U5T1U S-19212D25A-S8T1U S-19212D25A-M5T1U 3.0 V ± 2.0% S-19212D30A-V5T2U S-19212D30A-E8T1U S-19212D30A-E 6T1U S-19212D30A-U5T1U S-19212D30A-S8T1U S-19212D30A-M5T1U 3.3 V ± 2.0% S-19212D33A-V5T2U S-19212D33A-E8T1U S-19212D33A-E 6T1U S-19212D33A-U5T1U S-19212D33A-S8T1U S-19212D33A-M5T1U 5.0 V ± 2.0% S-19212D50A-V5T2U S-19212D50A-E8T1U S-19212D50A-E 6T1U S-19212D50A-U5T1U S-19212D50A-S8T1U S-19212D50A-M5T1U 5.5 V ± 2.0% S-19212D55A-V5T2U S-19212D55A-E8T1U S-19212D55A-E 6T1U S-19212D55A-U5T1U S-19212D55A-S8T1U S-19212D55A-M5T1U 6.0 V ± 2.0% S-19212D60A-V5T2U S-19212D60A-E8T1U S-19212D60A-E 6T1U S-19212D60A-U5T1U S-19212D60A-S8T1U S-19212D60A-M5T1U 7.0 V ± 2.0% S-19212D70A-V5T2U S-19212D70A-E8T1U S-19212D70A-E 6T1U S-19212D70A-U5T1U S-19212D70A-S8T1U S-19212D70A-M5T1U 8.0 V ± 2.0% S-19212D80A-V5T2U S-19212D80A-E8T1U S-19212D80A-E 6T1U S-19212D80A-U5T1U S-19212D80A-S8T1U S-19212D80A-M5T1U 9.0 V ± 2.0% S-19212D90A-V5T2U S-19212D90A-E8T1U S-19212D90A-E 6T1U S-19212D90A-U5T1U S-19212D90A-S8T1U S-19212D90A-M5T1U 10.5 V ± 2.0% S-19212DA5A-V5T2U S-19212DA5A-E8T1U S-19212DA5A-E6T1U S-19212DA5A-U5T1U S-19212DA5A-S8T1U S-19212DA5A-M5T1U 12.0 V ± 2.0% S-19212DC0A-V5T2U S-19212DC0A-E8T1U S-19212DC0A-E6T1U S-19212DC0A-U5T1U S-19212DC0A-S8T1U S-19212DC0A-M5T1U 12.5 V ± 2.0% S-19212DC5A-V5T2U S-19212DC5A-E8T1U S-19212DC5A-E6T1U S-19212DC5A-U5T1U S-19212DC5A-S8T1U S-19212DC5A-M5T1U 15.0 V ± 2.0% S-19212DF0A-V5T2U S-19212DF0A-E8T1U S-19212DF0A-E6T 1U S-19212DF0A-U5T1U S-19212DF0A-S8T1U S-19212DF0A-M5T1U Remark Please contact our sales office for products with specifications other than the above output voltage.

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series  Pin Configurations 1. TO-252-5S(A) Top view 51 42 Figure 2 Table 5 Pin No. Symbol Description

1 VOUT Output voltage pin

2 ON / OFF ON / OFF pin

3 VSS GND pin

4 NC*1 No connection

5 VIN Input voltage pin

*1. The NC pin is electrically open. The NC pin can be connected to the VIN pin or the VSS pin. 2. HSOP-8A Bottom view Top view Figure 3 Table 6 Pin No. Symbol Description

2 NC*2 No connection

3 NC*2 No connection

4 ON / OFF ON / OFF pin

5 VSS GND pin

6 NC*2 No connection

7 NC*2 No connection

8 VIN Input voltage pin

*1. Connect the heat sink of backside at shadowed area to the board, and set electric potential GND. However, do not use it as the function of electrode. *2. The NC pin is electrically open. The NC pin can be connected to the VIN pin or the VSS pin.

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR S-19212B/DxxA Series Rev.5.1_00 3. HSOP-6 13 2 465 Top view Figure 4 Table 7 Pin No. Symbol Description

2 VSS GND pin

3 ON / OFF ON / OFF pin

6 VIN Input voltage pin

*1. The NC pin is electrically open. The NC pin can be connected to the VIN pin or the VSS pin. 4. SOT-89-5 13 2 Top view Figure 5 Table 8 Pin No. Symbol Description

1 NC*1 No connection

3 VIN Input voltage pin

4 VOUT Output voltage pin

5 ON / OFF ON / OFF pin

*1. The NC pin is electrically open. The NC pin can be connected to the VIN pin or the VSS pin. 5. HTMSOP-8 Bottom view Top view Figure 6 Table 9 Pin No. Symbol Description *1. Connect the heat sink of backside at shadowed area to the board, and set electric potential GND. However, do not use it as the function of electrode. *2. The NC pin is electrically open. The NC pin can be connected to the VIN pin or the VSS pin.

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series 6. SOT-23-5 13 2 Top view Figure 7 Table 10 Pin No. Symbol Description

1 VIN Input voltage pin

3 NC*1 No connection

5 VOUT

*1. The NC pin is electrically open. The NC pin can be connected to the VIN pin or the VSS pin.

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR S-19212B/DxxA Series Rev.5.1_00  Absolute Maximum Ratings Table 11 (Ta = +25°C unless otherwise specified) Item Symbol Abso lute Maximum Rating Unit Input voltage VIN V SS − 0.3 to VSS + 45 V VON / OFF V SS − 0.3 to VIN + 0.3 ≤ VSS + 45 V Output voltage V OUT V SS − 0.3 to VIN + 0.3 ≤ VSS + 45 V Output current I OUT 280 mA Junction temperature T j −40 to +150 °C Operation ambient temperature T opr −40 to +125 °C Storage temperature T stg −40 to +150 °C Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.  Thermal Resistance Value Table 12 Item Symbol Condition Min. Typ. Max. Unit Junction-to-ambient thermal resistance *1 θja TO-252-5S(A) Board A − 90 − ° C/W Board B − 58 − ° C/W Board C − 38 − ° C/W Board D − 30 − ° C/W Board E − 29 − ° C/W HSOP-8A Board A − 115 − ° C/W Board B − 82 − ° C/W Board C − 42 − ° C/W Board D − 43 − ° C/W Board E − 35 − ° C/W HSOP-6 Board A − 106 − ° C/W Board B − 82 − ° C/W Board C − − − ° C/W Board D − 51 − ° C/W Board E − 48 − ° C/W SOT-89-5 Board A − 123 − ° C/W Board B − 90 − ° C/W Board C − − − ° C/W Board D − 53 − ° C/W Board E − 41 − ° C/W HTMSOP-8 Board A − 161 − ° C/W Board B − 116 − ° C/W Board C − 44 − ° C/W Board D − 44 − ° C/W Board E − 35 − ° C/W SOT-23-5 Board A − 180 − ° C/W Board B − 143 − ° C/W Board C − − − ° C/W Board D − − − ° C/W Board E − − − ° C/W *1. Test environment: compliance with JEDEC STANDARD JESD51-2A Remark Refer to " Power Dissipation" and "Test Board" for details.

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series  Electrical Characteristics Table 13 (Tj = −40°C to +125°C unless otherwise specified) Item Symbol Condition Min. Typ. Max. Unit Test Circuit Output voltage *1 VOUT(E) VIN = VOUT(S) + 2.0 V, IOUT = 10 mA VOUT(S) × 0.980 VOUT(S) VOUT(S) × 1.020 V 1 Output current *2 IOUT VIN ≥ VOUT(S) + 2.0 V 250*4 − − mA 3 Dropout voltage *3 Vdrop IOUT = 125 mA, Ta = +25°C − 0.35 − V 1 IOUT = 250 mA, Ta = +25°C − 0.80 − V 1 Line regulation ΔVOUT1 ΔVIN • VOUT VOUT(S) + 0.5 V ≤ VIN ≤ 36 V, IOUT = 10 mA − 0.01 0.03 %/V 1 Load regulation ΔVOUT2 VIN = VOUT(S) + 2.0 V, 2.5 V ≤ VOUT(S) < 5.1 V, 0.1 mA ≤ IOUT ≤ 40 mA − 16 30 mV 1 VIN = VOUT(S) + 2.0 V, 5.1 V ≤ VOUT(S) < 12.1 V, 0.1 mA ≤ IOUT ≤ 40 mA − 16 35 mV 1 VIN = VOUT(S) + 2.0 V, 12.1 V ≤ VOUT(S) ≤ 16.0 V, 0.1 mA ≤ IOUT ≤ 40 mA − 16 40 mV 1 Current consumption during operation I SS1 VIN = 18.0 V, VON / OFF = VIN, IOUT = 0.01 mA − 6.5 8.5 μA 2 Current consumption during power-off I SS2 VIN = 18.0 V, VON / OFF = 0 V, no load − 0.1 3.5 μA 2 Input voltage V IN − 3.0 − 36 V − ON / OFF pin input voltage "H" V SH VIN = 18.0 V, R L = 1.0 kΩ, determined by V OUT output level B type (ON / OFF logic active "H") 1.5 − − V 4 D type (ON / OFF logic active "H") 2.0 − − V 4 ON / OFF pin input voltage "L" VSL VIN = 18.0 V, R L = 1.0 kΩ, determined by V OUT output level B type (ON / OFF logic active "H") − − 0.25 V 4 D type (ON / OFF logic active "H") − − 0.8 V 4 ON / OFF pin input current "H" I SH VIN = 18.0 V, V ON / OFF = VIN −0.1 − 0.1 μA 4 ON / OFF pin input current "L" ISL VIN = 18.0 V, V ON / OFF = 0 V −0.1 − 0.1 μA 4 Ripple rejection |RR| VIN = VOUT(S) + 2.0 V, f = 100 Hz, ΔVrip = 0.5 Vrms, IOUT = 10 mA, Ta = +25°C 2.5 V ≤ VOUT(S) < 3.6 V − 45 − dB 5 3.6 V ≤ VOUT(S) < 6.1 V − 40 − dB 5 6.1 V ≤ VOUT(S) < 10.1 V − 35 − dB 5 10.1 V ≤ VOUT(S) ≤ 16.0 V − 30 − dB 5 Short-circuit current I short VIN = VOUT(S) + 2.0 V, VON / OFF = VIN, VOUT = 0 V, Ta = +25°C − 120 − mA 3 Thermal shutdown detection temperature T SD Junction temperature − 165 − °C − Thermal shutdown release temperature TSR Junction temperature − 140 − °C − Discharge shunt resistance during power-off RLOW VIN = 18.0 V, V ON / OFF = 0 V, VOUT = 2.0 V − 70 − kΩ 6 *1. V OUT(S): Set output voltage VOUT(E): Actual output voltage The output voltage when V IN = VOUT(S) + 2.0 V, IOUT = 10 mA *2. The output current at which the output voltage becomes 95% of V OUT(E) after gradually increasing the output current. *3. V drop = VIN1 − (VOUT3 × 0.98) VIN1 is the input voltage at which th e output voltage becomes 98% of V OUT3 after gradually decreasing the input voltage. VOUT3 is the output voltage when V IN = VOUT(S) + 2.0 V, and IOUT = 125 mA or 250 mA. *4. Due to limitation of the power dissipation, this value ma y not be satisfied. Attention should be paid to the power dissipation when the output current is large. This specification is guaranteed by design.

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series Set to GND VOUTVIN VSS VON / OFF A Figure 13 Test Circuit 6

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR S-19212B/DxxA Series Rev.5.1_00  Standard Circuit CIN *1 CL Input Output GNDSingle GND VOUTVIN VSS ON / OFF *1. CIN is a capacitor for stabilizing the input. *2. CL is a capacitor for stabilizing the output. Figure 14 Caution The above connection diagram and constants will not guarantee successful operation. Perform thorough evaluation using an actual application to set the constants.  Condition of Application Input capacitor (CIN): A ceramic capacitor wi th capacitance of 1.0 μF or more is recommended. Output capacitor (CL): A ceramic capacitor wi th capacitance of 1.0 μF to 100 μF is recommended. Caution Generally, in a voltage regu lator, an oscillation may occur depe nding on the selection of the external parts. Perform thorough evaluation including the temperature characteristics with an actual application using the above capacitor s to confirm no oscillation occurs.  Selection of Input Capacitor (CIN) and Output Capacitor (CL) The S-19212B/DxxA Series requires C L between the VOUT pin and the VSS pin for phase compensation. The operation is stabilized by a ceramic capacitor with capacitance of 1.0 μF to 100 μF. When using an OS capacitor, a tantalum capacitor or an aluminum electrolytic capacitor, the capacitance also must be 1.0 μF to 100 μF. However, an oscillation may occur depending on the equivalent series resistance (ESR). Moreover, the S-19212B/DxxA Series requires C IN between the VIN pin and the VSS pin for a stable operation. Generally, an oscillaiton may occur when a voltage regulato r is used under the conditon that the impedance of the power supply is high. Note that the output voltage tr ansient characteristics varies depending on the capacitance of C IN and CL and the value of ESR. Caution Perform thorough evaluation including the temperature characteristics with an actual application to select C IN and CL.

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series  Explanation of Terms 1. Low dropout voltage regulator This is a voltage regulator which made dropout voltage small by its built-in low on-resistance output transistor. 2. Output voltage (V OUT) This voltage is output at an accuracy of ±2.0% when the input voltage, the ou tput current and the temperature are in a certain condition *1. *1. Differs depending on the product. Caution If the certain condition is not satisfied, the output voltag e may exceed the accuracy range of ±2.0%. Refer to " Electrical Characteristics" and "  Characteristics (Typical Data)" for details. 3. Line regulation  ΔVOUT1 ΔVIN • VOUT Indicates the dependency of the output voltage against the input voltage. That is, the value shows how much the output voltage changes due to a change in the inpu t voltage after fixing ou tput current constant. 4. Load regulation ( ΔVOUT2) Indicates the dependency of the output voltage against the output current. That is, the value shows how much the output voltage changes due to a change in the ou tput current after fixing input voltage constant. 5. Dropout voltage (V drop) Indicates the difference between input voltage (V IN1) and the output voltage when th e output voltage becomes 98% of the output voltage value (V OUT3) at VIN = VOUT(S) + 2.0 V after the input voltage (V IN) is decreased gradually. Vdrop = VIN1 − (VOUT3 × 0.98)

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series 3. ON / OFF pin The ON / OFF pin controls the internal circuit and the output transistor in order to start and stop the regulator. When the ON / OFF pin is set to OFF, the internal circuit st ops operating and the output tr ansistor between the VIN pin and the VOUT pin is turned off, reducing current consumption significantly. The internal equivalent circuit related to the ON / OFF pin is configured as shown in Figure 16. Since the ON / OFF pin is neither pulled down nor pulled up, do not use it in the floating status. When not using the ON / OFF pin, connect it to the VIN pin. Note that the cu rrent consumption increases when a voltage of V SL max.*1 to VIN − 0.3 V is applied to the ON / OFF pin. Table 14 Product Type ON / OFF Pin Internal Circuit VOUT Pin Voltage Current Consumption B / D "H": ON Operate Constant value*2 ISS1 B / D "L": OFF Stop Pulled down to VSS *3 ISS2 *1. Refer to Table 13 in " Electrical Characteristics ". *2. The constant value is output due to the r egulating based on the set output voltage value. *3. The VOUT pin voltage is pulled down to V SS due to the discharge shunt circuit (R LOW = 70 k Ω typ.), the feedback resistors (R s and Rf) and a load. VSS ON / OFF VIN Figure 16 4. Overcurrent protection circuit The S-19212B/DxxA Series has a built-in overcurrent prot ection circuit to limit the overcurrent of the output transistor. When the VOUT pin is shorted to the VSS pin, that is, at the time of the output short-circuit, the output current is limited to 120 mA typ. due to the overcurrent protection circuit operation. The S-19212B/DxxA Series restarts regulating when the output transistor is released from the overcurrent status. Caution 1. This overcurrent protection circuit does not work as for thermal protection. For example, when the output transistor keeps the overcurrent status long at the time of output short-circuit or due to other reasons, pay attention to the conditions of the input voltage and the load current so as not to exceed the power dissipation. 2. Note that any interference may be caused in the output voltage start-up when a load heavier than V OUT(S) 100 mA is connected.

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR S-19212B/DxxA Series Rev.5.1_00 5. Thermal shutdown circuit The S-19212B/DxxA Series has a built-in thermal shutdo wn circuit to limit overheating. When the junction temperature increases to 165 °C typ., the thermal shutdown circuit becomes the detection status, and the regulating is stopped. When the junction temperature decreases to 140 °C typ., the thermal shutdown circuit becomes the release status, and the regulator is restarted. If the thermal shutdown circuit becomes the detection status due to self-heati ng, the regulating is stopped and V OUT decreases. For this reason, the self-heating is limited and the temperature of the IC decreases. The thermal shutdown circuit becomes release status when the temperatur e of the IC decreases, and t he regulating is restarted, thus the self-heating is gener ated again. Repeating this procedure makes the waveform of V OUT into a pulse-like form. This phenomenon continues unless decreasing either or both of the input voltage and the output current in order to reduce the internal power consumption, or decreasing the ambient temperature. Note that the product may suffer physical damage such as deterioration if the above phenomenon occurs continuously. Caution 1. When the heat radiation of the application is not in a good condition, the self-heating cannot be limited immediately, and the IC may suffer physical damage. Perform thorough evaluation including the temperature characteristics with an actual application to confirm no problems happen. 2. If a large load current flows during the restart process of regulating after the thermal shutdown circuit changes to the release status from the detection status, the thermal shutdown circuit becomes the detection status again due to self-heating, and a problem may happen in the restart of regulating. A large load current, for example, occurs when charging to the C L whose capacitance is large. Perform thorough evaluation including the temperature characteristics with an actual application to select C L. Table 15 Thermal Shutdown Circuit VOUT Pin Voltage Release: 140°C typ.*1 Constant value *2 Detection: 165°C typ.*1 Pulled down to V SS *1. Junction temperature *2. The constant value is output due to the r egulating based on the set output voltage value. *3. The VOUT pin voltage is pulled down to V SS due to the feedback resistors (R s and Rf) and a load.

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series  Precautions

• Generally, when a voltage regulator is used under the condit ion that the load current value is small (0.1 mA or less), the output voltage may increase due to the leakage current of an output transistor.
• Generally, when a voltage regulator is used under the condit ion that the temperature is high, the output voltage may increase due to the leakage curre nt of an output transistor.
• Generally, when the ON / OFF pin is used under the condit ion of OFF, the output volt age may increase due to the leakage current of an output transistor.
• Generally, when a voltage regulator is used under the condi tion that the impedance of the power supply is high, an oscillation may occur. Perform thorough evaluation in cluding the temperature characteristics with an actual application to select C IN.
• Generally, in a voltage regulator, an oscillation may oc cur depending on the selection of the external parts. The following use conditions are recommended in the S-19 212B/DxxA Series, however, perform thorough evaluation including the temperature characteristics with an actual application to select C IN and CL. Input capacitor (C IN): A ceramic capacitor wi th capacitance of 1.0 μF or more is recommended. Output capacitor (CL): A ceramic capacitor wi th capacitance of 1.0 μF to 100 μF is recommended.
• Generally, in a voltage regulator, the values of an overshoot and an undershoot in the output voltage vary depending on the variation factors of input voltage start-up, in put voltage fluctuation and load fluctuation etc., or the capacitance of C IN or CL and the value of the equivalent series resi stance (ESR), which may cause a problem to the stable operation. Perform thorough evaluat ion including the temperature characteristics with an actual application to select CIN and CL.
• Generally, in a voltage regulator, an overshoot may occur in the output voltage moment arily if the input voltage steeply changes when the input voltage is started up or the input voltage fluc tuates etc. Perform thorough evaluation including the temperature characteristics with an ac tual application to confirm no problems happen.
• Generally, in a voltage regulator, if the VOUT pin is steeply shorted with GND, a negative voltage exceeding the absolute maximum ratings may occur in the VOUT pin due to resonance phenomenon of the inductance and the capacitance including C L on the application. The resonance phenomenon is expected to be weakened by inserting a series resistor into the resonance path, and the negativ e voltage is expected to be limit ed by inserting a protection diode between the VOUT pin and the VSS pin.
• If the input voltage is started up steeply under the condition that the capacitance of C L is large, the thermal shutdown circuit may be in the detection status by self-heating due to the charge current to C L.
• Make sure of the conditions for the input voltage, output voltage and the load current so that the internal loss does not exceed the power dissipation.
• Do not apply an electrostatic discharge to this IC that ex ceeds the performance ratings of the built-in electrostatic protection circuit.
• When considering the output current va lue that the IC is able to output, ma ke sure of the output current value specified in Table 13 in " Electrical Characteristics " and footnote *4 of the table.
• Wiring patterns on the application related to the VIN pin, the VOUT pin and the VSS pin should be designed so that the impedance is low. When mounting C IN between the VIN pin and the VSS pin and C L between the VOUT pin and the VSS pin, connect the capacitors as close as possi ble to the respective destination pins of the IC.
• In the package equipped with heat sink of backside, mount the heat sink firmly. Since the heat radiation differs according to the condition of the application, perform thor ough evaluation with an actual application to confirm no problems happen.
• SII Semiconductor Corporation claims no responsibility for any disputes arising out of or in connection with any infringement by products including this IC of patents owned by a third party.

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR S-19212B/DxxA Series Rev.5.1_00  Characteristics (Typical Data) 1. Output voltage vs. Output current (When load current increases) (Ta = +25°C) 1. 1 V OUT = 2.5 V 1. 2 V OUT = 5.0 V 100 200 300 400 500 600 700 8000 3.0 1.5 1.0 0.5 2.0 2.5 0.0 VOUT [V] IOUT [mA] VIN = 3.0 V VIN = 4.5 V VIN = 3.5 V VIN = 9.0 V 100 200 300 400 500 600 700 8000 6.0 3.0 2.0 1.0 4.0 5.0 0.0 VOUT [V] IOUT [mA] VIN = 5.5 V VIN = 7.0 V VIN = 6.0 V VIN = 9.0 V Remark In determining the output cu rrent, attention should be paid to the following. 1. The minimum output current value and footnote *4 of Table 13 in " Electrical Characteristics " 2. Power dissipation 2. Output voltage vs. Input voltage (Ta = +25°C) 2. 1 V OUT = 2.5 V 2. 2 V OUT = 5.0 V 6 1 21 82 43 03 60 2.9 1.7 VOUT [V] VIN [V] 2.3 1.9 2.5 2.1 2.7 IOUT = 0.1 mA IOUT = 10 mA IOUT = 40 mA 6 1 21 82 43 03 60 5.4 4.2 VOUT [V] VIN [V] 4.8 4.4 5.0 4.6 5.2 IOUT = 0.1 mA IOUT = 10 mA IOUT = 40 mA 2. 3 V OUT = 16.0 V 6 1 21 82 43 03 60 16.4 15.2 VOUT [V] VIN [V] 15.8 15.4 16.0 15.6 16.2 IOUT = 0.1 mA IOUT = 10 mA IOUT = 40 mA

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series 3. Dropout voltage vs. Output current 3. 1 V OUT = 2.5 V 3. 2 V OUT = 5.0 V 50 100 150 200 2500 Vdrop [V] IOUT [mA] 1.2 0.0 0.6 0.2 0.8 0.4 1.0 Tj = +125C Tj = +150C Tj = +25C Tj = 40C 50 100 150 200 2500 Vdrop [V] IOUT [mA] 1.2 0.0 0.6 0.2 0.8 0.4 1.0 Tj = +125C Tj = +150C Tj = +25C Tj = 40C 3. 3 V OUT = 16.0 V 50 100 150 200 2500 Vdrop [V] IOUT [mA] 1.2 0.0 0.6 0.2 0.8 0.4 1.0 Tj = +125C Tj = +150C Tj = +25C Tj = 40C 4. Dropout voltage vs. Junction temperature 4. 1 V OUT = 2.5 V 4. 2 V OUT = 5.0 V −25 0 150 125100755025−40 0.0 0.6 Vdrop [V] 0.5 0.4 0.3 0.2 0.1 T j [C] IOUT = 10 mA IOUT = 125 mA −25 0 150 125100755025−40 0.0 0.6 Vdrop [V] 0.5 0.4 0.3 0.2 0.1 T j [C] IOUT = 10 mA IOUT = 125 mA 4. 3 V OUT = 16.0 V −25 0 150 125100755025−40 0.0 0.6 Vdrop [V] 0.5 0.4 0.3 0.2 0.1 T j [C] IOUT = 10 mA IOUT = 125 mA

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR S-19212B/DxxA Series Rev.5.1_00 5. Dropout voltage vs. Set output voltage (Ta = +25°C) 1.0 0.0 VOUT(S) [V] 0.8 0.6 0.4 0.2 Vdrop [V] IOUT = 0.1 mA IOUT = 10 mA IOUT = 40 mA IOUT = 125 mA IOUT = 250 mA 6. Output voltage vs. Junction temperature 6. 1 V OUT = 2.5 V VIN = 4.5 V 6. 2 V OUT = 5.0 V VIN = 7.0 V −25 0 150 125100755025−40 2.45 2.55 Tj [C] 2.53 2.51 2.49 2.47 VOUT [V] −25 0 150 125100755025−40 4.90 5.10 Tj [C] 5.06 5.02 4.98 4.94 VOUT [V] 6. 3 V OUT = 16.0 V VIN = 18.0 V −25 0 150 125100755025−40 4.90 5.10 Tj [C] 5.06 5.02 4.98 4.94 VOUT [V]

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series 7. Current consumption during operation vs. Input voltage (When ON / OFF pin is ON, no load) 7. 1 V OUT = 2.5 V 7. 2 V OUT = 5.0 V 6 1 21 82 43 03 60 50.0 0.0 ISS1 [A] VIN [V] 40.0 30.0 20.0 10.0 Tj = 125C Tj = 150C Tj = 25C Tj = 40C 6 1 21 82 43 03 60 50.0 0.0 ISS1 [A] VIN [V] 40.0 30.0 20.0 10.0 Tj = 125C Tj = 150C Tj = 25C Tj = 40C 7. 3 V OUT = 16.0 V 6 1 21 82 43 03 60 50.0 0.0 ISS1 [A] VIN [V] 40.0 30.0 20.0 10.0 Tj = 125C Tj = 150C Tj = 25C Tj = 40C 8. Current consumption during operation vs. Junction temperature 8. 1 V OUT = 2.5 V VIN = 18.0 V 8. 2 V OUT = 5.0 V VIN = 18.0 V 25 50 75 100 125 1500 10.0 0.0 Tj [C] 8.0 6.0 4.0 2.0 ISS1 [A] 25 50 75 100 125 1500 10.0 0.0 Tj [C] 8.0 6.0 4.0 2.0 ISS1 [A] 8. 3 V OUT = 16.0 V VIN = 18.0 V 25 50 75 100 125 1500 10.0 0.0 Tj [C] 8.0 6.0 4.0 2.0 ISS1 [A]

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR S-19212B/DxxA Series Rev.5.1_00 9. Current consumption during operation vs. Output current (Ta = +25°C) 9. 1 V OUT = 2.5 V 9. 2 V OUT = 5.0 V 50 100 150 200 2500 50.0 0.0 40.0 30.0 20.0 10.0 ISS1 [A] IOUT [mA] VIN = 13.5 V VIN = 3.5 V 50 100 150 200 2500 50.0 0.0 40.0 30.0 20.0 10.0 ISS1 [A] IOUT [mA] VIN = 13.5 V VIN = 6.0 V 9. 3 V OUT = 16.0 V 50 100 150 200 2500 50.0 0.0 40.0 30.0 20.0 10.0 ISS1 [A] IOUT [mA] VIN = 20.0 V VIN = 17.0 V 10. Ripple rejection (Ta = +25°C) 10. 1 V OUT = 2.5 V VIN = 4.5 V, CL = 1.0 μF 10. 2 V OUT = 5.0 V VIN = 7.0 V, CL = 1.0 μF Ripple Rejection [dB] Frequency [Hz] 10 100k 120 10k1k100 100 IOUT = 10 mA IOUT = 250 mA IOUT = 0.01 mA Ripple Rejection [dB] Frequency [Hz] 10 100k 120 10k1k100 100 IOUT = 10 mA IOUT = 250 mA IOUT = 0.01 mA 10. 3 V OUT = 16.0 V VIN = 18.0 V, CL = 1.0 μF Ripple Rejection [dB] Frequency [Hz] 10 100k 120 10k1k100 100 IOUT = 10 mA IOUT = 250 mA IOUT = 0.01 mA

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series  Reference Data 1. Characteristics of input transient response (Ta = +25°C) 1. 1 V OUT = 2.5 V IOUT = 40 mA, CIN = 1.0 μF, VIN = 11.5 V ↔ 13.5 V, tr = tf = 5.0 μs 1. 2 V OUT = 5.0 V IOUT = 40 mA, CIN = 1.0 μF, VIN = 11.5 V ↔ 13.5 V, tr = tf = 5.0 μs VOUT [V] t [ms] VIN [V] 3.3 2.3 3.1 2.9 2.7 2.5 CL = 10.0 FVIN VOUT CL = 22.0 F VOUT [V] t [ms] VIN [V] 5.8 4.8 5.6 5.4 5.2 5.0 CL = 10.0 FVIN VOUT CL = 22.0 F 1. 3 V OUT = 16.0 V IOUT = 40 mA, CIN = 1.0 μF, VIN = 18.0 V ↔ 19.5 V, tr = tf = 5.0 μs VOUT [V] t [ms] VIN [V] 16.8 15.8 16.6 16.4 16.2 16.0 CL = 10.0 F VIN VOUT CL = 22.0 F 2. Characteristics of load transient response (Ta = +25°C) 2. 1 V OUT = 2.5 V VIN = 13.5 V, CIN = 1.0 μF, IOUT = 50 mA ↔ 100 mA 2. 2 V OUT = 5.0 V VIN = 13.5 V, CIN = 1.0 μF, IOUT = 50 mA ↔ 100 mA VOUT [V] t [ms] 2.9 2.3 150 150 2.6 2.4 2.7 2.5 2.8 100 50 100 IOUT [mA] CL = 10.0 F IOUT VOUT CL = 22.0 F VOUT [V] t [ms] 5.4 4.8 150 150 5.1 4.9 5.2 5.0 5.3 100 50 100 IOUT [mA] CL = 10.0 F IOUT VOUT CL = 22.0 F 2. 3 V OUT = 16.0 V VIN = 18.0 V, CIN = 1.0 μF, IOUT = 50 mA ↔ 100 mA VOUT [V] t [ms] 16.4 15.8 150 150 16.1 15.9 16.2 16.0 16.3 100 50 100 IOUT [mA] CL = 10.0 F IOUT VOUT CL = 22.0 F

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR S-19212B/DxxA Series Rev.5.1_00 3. Transient response characteristics of ON / OFF pin (Ta = +25°C) 3. 1 V OUT = 2.5 V VIN = 13.5 V, CL = 10.0 μF, CIN = 1.0 μF, IOUT = 125 mA, VON / OFF = 0 V → 13.5 V 3. 2 V OUT = 5.0 V VIN = 13.5 V, CL = 10.0 μF, CIN = 1.0 μF, IOUT = 125 mA, VON / OFF = 0 V → 13.5 V VON / OFF [V] t [ms] 6.0 0.0 9.0 3.0 12.0 15.0 3.0 12 18 VOUT [V] VOUT VON / OFF VON / OFF [V] t [ms] 6.0 0.0 9.0 3.0 12.0 15.0 3.0 12 18 VOUT [V] VOUT VON / OFF 4. Load transient response characteristics dependent on capacitance (Ta = +25°C) 4. 1 V OUT = 5.0 V VIN = 13.5 V, CIN = 1.0 μF, IOUT = 50 mA → 100 mA VIN = 13.5 V, CIN = 1.0 μF, IOUT = 100 mA → 50 mA 20 40 60 80 1000 0.20 Undershoot [V] CL [F] 0.15 0.10 0.05 0.00 20 40 60 80 1000 0.20 Overshoot [V] CL [F] 0.15 0.10 0.05 0.00 5. Input transient response characteristics dependent on capacitance (Ta = +25°C) 5. 1 V OUT = 5.0 V VIN = 7.0 V → 12.0 V, tr = 5.0 μs, CIN = 1.0 μF, IOUT = 40 mA VIN = 12.0 V → 7.0 V, tr = 5.0 μs, CIN = 1.0 μF, IOUT = 40 mA 20 40 60 80 1000 2.0 Overshoot [V] CL [μF] 1.5 1.0 0.5 0.0 20 40 60 80 1000 2.0 Undershoot [V] CL [μF] 1.5 1.0 0.5 0.0

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series 6. Load dump characteristics (Ta = +25°C) 6. 1 VOUT = 3.3 V IOUT = 0.1 mA, VIN = 13.5 V ↔ 45.0 V, CIN = CL = 1.0 μF 4.3 3.1 0.1 0.9 VOUT [V] 0.40.30.20.10 4.1 3.9 3.7 3.5 3.3 t [s] 10 VIN [V] 0.5 0.6 0.7 0.8 VOUT VIN 7. Example of equivalent series resistan ce vs. Output current characteristics (Ta = +25°C) 100 0.1 250 IOUT [mA] RESR [Ω] CIN = CL = 1.0 μF Stable CIN VIN VSS CL RESR S-19212B/DxxA Series VOUT ON / OFF *1. CL: TDK Corporation CGA5L3X8R1H105M (1.0 μF) Figure 17 Figure 18

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR S-19212B/DxxA Series Rev.5.1_00  Power Dissipation 0 25 50 75 100 125 150 1750 Ambient temperature (Ta) [C] Power dissipation (PD) [W] Tj = 150C max. TO-252-5S(A) E D C B A 0 25 50 75 100 125 150 1750 Ambient temperature (Ta) [C] Power dissipation (PD) [W] Tj = 150C max. HSOP-8A E D C B A Board Power Dissipation (P D) Board Power Dissipation (P D) A 1.39 W A 1.09 W B 2.16 W B 1.52 W C 3.29 W C 2.98 W D 4.17 W D 2.91 W E 4.31 W E 3.57 W 0 25 50 75 100 125 150 1750 Ambient temperature (Ta) [C] Power dissipation (PD) [W] Tj = 150C max. HSOP-6 E D B A 0 25 50 75 100 125 150 1750 Ambient temperature (Ta) [C] Power dissipation (PD) [W] Tj = 150C max. SOT-89-5 E D B A Board Power Dissipation (P D) Board Power Dissipation (P D) A 1.18 W A 1.02 W B 1.52 W B 1.39 W C − C − D 2.45 W D 2.36 W E 2.60 W E 3.05 W

FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.5.1_00 S-19212B/DxxA Series 0 25 50 75 100 125 150 1750 Ambient temperature (Ta) [C] Power dissipation (PD) [W] Tj = 150C max. HTMSOP-8 E D C B A 0 25 50 75 100 125 150 1750 Ambient temperature (Ta) [C] Power dissipation (PD) [W] Tj = 150C max. SOT-23-5 B A Board Power Dissipation (P D) Board Power Dissipation (P D) A 0.78 W A 0.69 W B 1.08 W B 0.87 W C 2.84 W C − D 2.84 W D − E 3.57 W E −

(1) (2) (3) 74.2 x 74.2 x t0.070 Thermal via - Material FR-4 Board A Item Specification Size [mm] 114.3 x 76.2 x t1.6 Thermal via - Size [mm] 114.3 x 76.2 x t1.6 Number of copper foil layer 2 Copper foil layer [mm] Land pattern and wiring for testing: t0.070 Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] Land pattern and wiring for testing: t0.070 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.070 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.070 Thermal via Number: 4 Diameter: 0.3 mm Board B Item Specification Size [mm] 114.3 x 76.2 x t1.6 Board C Item Specification Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] Land pattern and wiring for testing: t0.070 IC Mount Area enlarged view TO-252-5S Test Board No. TO252-5S-A-Board-SD-1.0 SII Semiconductor Corporation

(4) (5) Board D Item Specification Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] Pattern for heat radiation: 2000mm 2 t0.070 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.070 74.2 x 74.2 x t0.070 Thermal via - Board E Item Specification Size [mm] 114.3 x 76.2 x t1.6 Thermal via Number: 4 Diameter: 0.3 mm Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] Pattern for heat radiation: 2000mm 2 t0.070 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 enlarged view IC Mount Area TO-252-5S Test Board No. TO252-5S-A-Board-SD-1.0 SII Semiconductor Corporation

(1) (2) (3) Size [mm] 114.3 x 76.2 x t1.6 Item Specification Thermal via - Material FR-4 Number of copper foil layer 2 Copper foil layer [mm] Land pattern and wiring for testing: t0.070 Item Specification 74.2 x 74.2 x t0.070 Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] Land pattern and wiring for testing: t0.070 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.070 Size [mm] 114.3 x 76.2 x t1.6 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.070 Material FR-4 Thermal via - Item Specification Board A Board B Board C Thermal via Number: 4 Diameter: 0.3 mm Number of copper foil layer 4 Copper foil layer [mm] Land pattern and wiring for testing: t0.070 74.2 x 74.2 x t0.035 IC Mount Area enlarged view HSOP-8A Test Board No. HSOP8A-A-Board-SD-1.0 SII Semiconductor Corporation

(4) (5) Board D Board E Thermal via Number: 4 Diameter: 0.3 mm Number of copper foil layer 4 Copper foil layer [mm] Pattern for heat radiation: 2000mm 2 t0.070 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.070 Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Thermal via - Item Specification Number of copper foil layer 4 Copper foil layer [mm] Pattern for heat radiation: 2000mm2 t0.070 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.070 Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Item Specification enlarged view IC Mount Area HSOP-8A Test Board No. HSOP8A-A-Board-SD-1.0 SII Semiconductor Corporation

(1) Item Specification Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Number of copper foil layer 2 Copper foil layer [mm] 1 Land pattern and wiring for testing: t0.070 4 74.2 x 74.2 x t0.070 (2) Item Specification Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Number of copper foil layer 4 (3) Item Specification (4) 4 74.2 x 74.2 x t0.070 Size [mm] Material FR-4 Number of copper foil layer 4 74.2 x 74.2 x t0.035 Copper foil layer [mm] Thermal via Number: 4 Diameter: 0.3 mm Material FR-4 Number of copper foil layer 74.2 x 74.2 x t0.035 Copper foil layer [mm] Pattern for heat radiation: 2000mm 2 t0.070 74.2 x 74.2 x t0.035 114.3 x 76.2 x t1.6 Item Specification Board D -Thermal via 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.070 Board E Thermal via - Size [mm] 114.3 x 76.2 x t1.6 Copper foil layer [mm] Pattern for heat radiation: 2000mm2 t0.070 Thermal via - Board A 74.2 x 74.2 x t0.070 Board B 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 Land pattern and wiring for testing: t0.070 IC Mount Area enlarged view HSOP-6 Test Board No. HSOP6-A-Board-SD-1.0 SII Semiconductor Corporation

(1) Item Specification Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Number of copper foil layer 2 Copper foil layer [mm] 1 Land pattern and wiring for testing: t0.070 4 74.2 x 74.2 x t0.070 (2) Item Specification Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] 1 Land pattern and wiring for testing: t0.070 2 74.2 x 74.2 x t0.035 3 74.2 x 74.2 x t0.035 4 74.2 x 74.2 x t0.070 (3) Item Specification Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] 1 Pattern for heat radiation: 2000mm 2 t0.070 2 74.2 x 74.2 x t0.035 3 74.2 x 74.2 x t0.035 4 74.2 x 74.2 x t0.070 (4) Item Specification Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] 1 Pattern for heat radiation: 2000mm 2 t0.070 2 74.2 x 74.2 x t0.035 3 74.2 x 74.2 x t0.035 4 74.2 x 74.2 x t0.070 Board B Thermal via - Thermal via - Board A Board E Thermal via Number: 4 Diameter: 0.3 mm Board D Thermal via - IC Mount Area enlarged view SOT-89-5 Test Board No. SOT895-A-Board-SD-1.0 SII Semiconductor Corporation

(1) (2) (3) Thermal via Number: 4 Diameter: 0.3 mm Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] Land pattern and wiring for testing: t0.070 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.070 Thermal via - Board C Item Specification Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] Land pattern and wiring for testing: t0.070 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.070 Thermal via - Board B Item Specification Size [mm] 114.3 x 76.2 x t1.6 Number of copper foil layer 2 Copper foil layer [mm] Land pattern and wiring for testing: t0.070 74.2 x 74.2 x t0.070 Board A Item Specification Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 IC Mount Area enlarged view HTMSOP-8 Test Board No. HTMSOP8-A-Board-SD-1.0 SII Semiconductor Corporation

(4) (5) 4 74.2 x 74.2 x t0.070 Thermal via Number: 4 Diameter: 0.3 mm Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] Pattern for heat radiation: 2000mm 2 t0.070 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 Thermal via - Board E Item Specification Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] Pattern for heat radiation: 2000mm2 t0.070 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.070 Board D Item Specification Size [mm] 114.3 x 76.2 x t1.6 IC Mount Area enlarged view HTMSOP-8 Test Board No. HTMSOP8-A-Board-SD-1.0 enlarged view SII Semiconductor Corporation

(1) (2) Board A Item Specification Size [mm] 114.3 x 76.2 x t1.6 Material FR-4 Number of copper foil layer 2 Copper foil layer [mm] Land pattern and wiring for testing: t0.070 74.2 x 74.2 x t0.070 74.2 x 74.2 x t0.070 Thermal via - Board B Item Specification Size [mm] 114.3 x 76.2 x t1.6 Thermal via - Material FR-4 Number of copper foil layer 4 Copper foil layer [mm] Land pattern and wiring for testing: t0.070 74.2 x 74.2 x t0.035 74.2 x 74.2 x t0.035 IC Mount Area SOT-23-3/5/6 Test Board No. SOT23x-A-Board-SD-1.0 SII Semiconductor Corporation

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45 /X56/X41/X30/X30/X35/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X32/X2E/X30 /X54/X4F/X2D/X32/X35/X32/X2D/X35/X53/X2D/X41/X2D/X50/X4B/X47/X20/X44/X69/X6D/X65/X6E/X73/X69/X6F/X6E/X73 /X36/X2E/X35/XB1/X30/X2E/X32 /X35/X2E/X38 /X28/X35/X2E/X32/X29 /X30/X2E/X36/XB1/X30/X2E/X31 /X31/X2E/X32/X37 /X4E/X6F/X2E/X20/X56/X41/X30/X30/X35/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X32/X2E/X30 /X6D/X6D /X31/X2E/X32/XB1/X30/X2E/X31 /X30/X2E/X32/X32/XB1/X30/X2E/X30/X35 /X30/X2E/X38/X30

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45 /X6D/X6D /X35 /X31 /XF8/X31/X2E/X37/XB1/X30/X2E/X31 /XF8/X31/X2E/X35 /X30/X2E/X32/XB1/X30/X2E/X30/X35 /X31/X2E/X35/XB1/X30/X2E/X31/X38/X2E/X30/XB1/X30/X2E/X31 /X36/X2E/X39/XB1/X30/X2E/X31 /X32/X2E/X30/XB1/X30/X2E/X30/X35 /X46/X65/X65/X64/X20/X64/X69/X72/X65/X63/X74/X69/X6F/X6E /X34/X2E/X30/XB1/X30/X2E/X31/X28/X31/X30/X20/X70/X69/X74/X63/X68/X65/X73/X3A/X34/X30/X2E/X30/XB1/X30/X2E/X32/X29 /X54/X4F/X2D/X32/X35/X32/X2D/X35/X53/X2D/X41/X2D/X43/X61/X72/X72/X69/X65/X72/X20/X54/X61/X70/X65 /X4E/X6F/X2E/X20/X56/X41/X30/X30/X35/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X31/X2E/X30 /X56/X41/X30/X30/X35/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X31/X2E/X30 /X2B/X30/X2E/X31 /X2D/X30/X2E/X30

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45 /X36/X30/XB0 /X32/XB1/X30/X2E/X35 /XF8/X31/X33/XB1/X30/X2E/X32 /XF8/X32/X31/XB1/X30/X2E/X38 /X45/X6E/X6C/X61/X72/X67/X65/X64/X20/X64/X72/X61/X77/X69/X6E/X67/X20/X69/X6E/X20/X74/X68/X65/X20/X63/X65/X6E/X74/X72/X61/X6C/X20/X70/X61/X72/X74 /X31/X33/X2E/X34/XB1/X31/X2E/X30 /X31/X37/X2E/X34/XB1/X31/X2E/X30 /X54/X4F/X2D/X32/X35/X32/X2D/X35/X53/X2D/X41/X2D/X52/X65/X65/X6C /X4E/X6F/X2E/X20/X56/X41/X30/X30/X35/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X30 /X56/X41/X30/X30/X35/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X30 /X6D/X6D /X51/X54/X59/X2E/X34/X2C/X30/X30/X30

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45 /X30/X2E/X38 /X36/X2E/X30 /X32/X2E/X35/X34 /X54/X4F/X2D/X32/X35/X32/X2D/X35/X53/X2D/X41 /X2D/X4C/X61/X6E/X64/X20/X52/X65/X63/X6F/X6D/X6D/X65/X6E/X64/X61/X74/X69/X6F/X6E /X56/X41/X30/X30/X35/X2D/X41/X2D/X4C/X2D/X53/X44/X2D/X31/X2E/X30 /X4E/X6F/X2E/X20/X56/X41/X30/X30/X35/X2D/X41/X2D/X4C/X2D/X53/X44/X2D/X31/X2E/X30 /X31/X2E/X32/X37 /X6D/X6D

/X4E/X6F/X2E/X20/X46/X48/X30/X30/X38/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X32/X2E/X30 /X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X6D/X6D /X48/X53/X4F/X50/X38/X41/X2D/X41/X2D/X50/X4B/X47/X20/X44/X69/X6D/X65/X6E/X73/X69/X6F/X6E/X73 /X46/X48/X30/X30/X38/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X32/X2E/X30 /X30/X2E/X34/XB1/X30/X2E/X30/X35/X31/X2E/X32/X37 /X35/X2E/X30/X32/XB1/X30/X2E/X32 /X31 /X34 /X38/X35 /X31/X34 /X38/X35 /X33/X2E/X30 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45 /X30/X2E/X32/X30/XB1/X30/X2E/X30/X35

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X6D/X6D /X35 /X38/X31 /X34 /XF8/X32/X2E/X30/XB1/X30/X2E/X30/X35 /XF8/X31/X2E/X35 /X30/X2E/X33/XB1/X30/X2E/X30/X35 /X32/X2E/X31/XB1/X30/X2E/X31/X38/X2E/X30/XB1/X30/X2E/X31 /X36/X2E/X37/XB1/X30/X2E/X31 /X32/X2E/X30/XB1/X30/X2E/X30/X35 /X46/X65/X65/X64/X20/X64/X69/X72/X65/X63/X74/X69/X6F/X6E /X34/X2E/X30/XB1/X30/X2E/X31/X28/X31/X30/X20/X70/X69/X74/X63/X68/X65/X73/X3A/X34/X30/X2E/X30/XB1/X30/X2E/X32/X29 /X48/X53/X4F/X50/X38/X41/X2D/X41/X2D/X43/X61/X72/X72/X69/X65/X72/X20/X54/X61/X70/X65 /X4E/X6F/X2E/X20/X46/X48/X30/X30/X38/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X31/X2E/X30 /X46/X48/X30/X30/X38/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X31/X2E/X30 /X2B/X30/X2E/X31 /X2D/X30/X2E/X30 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54/X6D/X6D /X51/X54/X59/X2E/X34/X2C/X30/X30/X30 /X48/X53/X4F/X50/X38/X41/X2D/X41/X2D/X52/X65/X65/X6C /X4E/X6F/X2E/X20/X46/X48/X30/X30/X38/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X30 /X46/X48/X30/X30/X38/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X30 /X32/XB1/X30/X2E/X35 /XF8/X31/X33/XB1/X30/X2E/X32 /XF8/X32/X31/XB1/X30/X2E/X38 /X45/X6E/X6C/X61/X72/X67/X65/X64/X20/X64/X72/X61/X77/X69/X6E/X67/X20/X69/X6E/X20/X74/X68/X65/X20/X63/X65/X6E/X74/X72/X61/X6C/X20/X70/X61/X72/X74 /X31/X37/X2E/X34/XB1/X31/X2E/X30 /X31/X33/X2E/X34/XB1/X31/X2E/X30 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X6D/X6D /X48/X53/X4F/X50/X38/X41/X2D/X41 /X20/X20/X20/X20/X20/X20/X2D/X4C/X61/X6E/X64/X20/X52/X65/X63/X6F/X6D/X6D/X65/X6E/X64/X61/X74/X69/X6F/X6E /X46/X48/X30/X30/X38/X2D/X41/X2D/X4C/X2D/X53/X44/X2D/X31/X2E/X30 /X31/X2E/X32/X37 /X30/X2E/X37/X36 /X31/X2E/X32/X37/X31/X2E/X32/X37 /X33/X2E/X32 /X4E/X6F/X2E/X20/X46/X48/X30/X30/X38/X2D/X41/X2D/X4C/X2D/X53/X44/X2D/X31/X2E/X30 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45

/X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X41/X4E/X47/X4C/X45 /X55/X4E/X49/X54 /X4E/X6F/X2E/X20/X46/X48/X30/X30/X36/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X32/X2E/X31 /X6D/X6D /X48/X53/X4F/X50/X36/X2D/X41/X2D/X50/X4B/X47/X20/X44/X69/X6D/X65/X6E/X73/X69/X6F/X6E/X73 /X46/X48/X30/X30/X36/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X32/X2E/X31 /X30/X2E/X34/XB1/X30/X2E/X30/X35 /X31/X2E/X39/X31 /X35/X2E/X30/X32/XB1/X30/X2E/X32 /X31 /X33 /X36/X34 /X31/X2E/X39/X31 /X31/X2E/X36/X37/XB1/X30/X2E/X30/X35 /X35 /X32 /X30/X2E/X32/X30/XB1/X30/X2E/X30/X35

/X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X41/X4E/X47/X4C/X45 /X55/X4E/X49/X54/X6D/X6D /X34 /X36/X31 /X33 /XF8/X32/X2E/X30/XB1/X30/X2E/X30/X35 /XF8/X31/X2E/X35/X35/XB1/X30/X2E/X30/X35 /X30/X2E/X33/XB1/X30/X2E/X30/X35 /X32/X2E/X31/XB1/X30/X2E/X31/X38/X2E/X30/XB1/X30/X2E/X31 /X35/XB0/X6D/X61/X78/X2E /X36/X2E/X37/XB1/X30/X2E/X31 /X32/X2E/X30/XB1/X30/X2E/X30/X35 /X46/X65/X65/X64/X20/X64/X69/X72/X65/X63/X74/X69/X6F/X6E /X34/X2E/X30/XB1/X30/X2E/X31/X28/X31/X30/X20/X70/X69/X74/X63/X68/X65/X73/X3A/X34/X30/X2E/X30/XB1/X30/X2E/X32/X29 /X48/X53/X4F/X50/X36/X2D/X41/X2D/X43/X61/X72/X72/X69/X65/X72/X20/X54/X61/X70/X65 /X46/X48/X30/X30/X36/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X31/X2E/X30 /X4E/X6F/X2E/X20/X46/X48/X30/X30/X36/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X31/X2E/X30

/X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X41/X4E/X47/X4C/X45 /X55/X4E/X49/X54/X6D/X6D /X51/X54/X59/X2E/X34/X2C/X30/X30/X30 /X32/XB1/X30/X2E/X35 /X31/X33/X2E/X35/XB1/X30/X2E/X35 /X36/X30/XB0 /X32/XB1/X30/X2E/X35 /XF8/X31/X33/XB1/X30/X2E/X32 /XF8/X32/X31/XB1/X30/X2E/X38 /X45/X6E/X6C/X61/X72/X67/X65/X64/X20/X64/X72/X61/X77/X69/X6E/X67/X20/X69/X6E/X20/X74/X68/X65/X20/X63/X65/X6E/X74/X72/X61/X6C/X20/X70/X61/X72/X74 /X48/X53/X4F/X50/X36/X2D/X41/X2D/X52/X65/X65/X6C /X4E/X6F/X2E/X20/X46/X48/X30/X30/X36/X2D/X41/X2D/X52/X2D/X53/X31/X2D/X31/X2E/X30 /X46/X48/X30/X30/X36/X2D/X41/X2D/X52/X2D/X53/X31/X2D/X31/X2E/X30

/X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X41/X4E/X47/X4C/X45 /X31/X2E/X35/XB1/X30/X2E/X31 /X31/X2E/X35/XB1/X30/X2E/X31 /X31/X2E/X36/XB1/X30/X2E/X32 /X34/X2E/X35/XB1/X30/X2E/X31 /X31/X33 /X32 /X31/X2E/X35/XB1/X30/X2E/X31 /X30/X2E/X34/XB1/X30/X2E/X30/X35 /X30/X2E/X34/XB1/X30/X2E/X31 /X30/X2E/X34/X35/XB1/X30/X2E/X31 /X30/X2E/X34/XB1/X30/X2E/X31 /X35/X34 /X53/X4F/X54/X38/X39/X35/X2D/X41/X2D/X50/X4B/X47/X20/X44/X69/X6D/X65/X6E/X73/X69/X6F/X6E/X73 /X4E/X6F/X2E/X20/X55/X50/X30/X30/X35/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X32/X2E/X30 /X55/X50/X30/X30/X35/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X32/X2E/X30 /X34/X35/XB0 /X30/X2E/X33 /X6D/X6D

/X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X41/X4E/X47/X4C/X45 /X32/X2E/X30/XB1/X30/X2E/X31 /X30/X2E/X33/XB1/X30/X2E/X30/X35/X38/X2E/X30/XB1/X30/X2E/X31/XF8/X31/X2E/X35 /X2B/X30/X2E/X31 /X20/X2D/X30 /X32/X2E/X30/XB1/X30/X2E/X30/X35/XF8/X31/X2E/X35/X2B/X30/X2E/X31 /X20/X2D/X30 /X34/X2E/X37/X35/XB1/X30/X2E/X31 /X35/XB0/X20/X6D/X61/X78/X2E /X31/X33/X32 /X35/X34 /X4E/X6F/X2E/X20/X55/X50/X30/X30/X35/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X31/X2E/X31 /X55/X50/X30/X30/X35/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X31/X2E/X31 /X53/X4F/X54/X38/X39/X35/X2D/X41/X2D/X43/X61/X72/X72/X69/X65/X72/X20/X54/X61/X70/X65 /X46/X65/X65/X64/X20/X64/X69/X72/X65/X63/X74/X69/X6F/X6E /X34/X2E/X30/XB1/X30/X2E/X31/X28/X31/X30/X20/X70/X69/X74/X63/X68/X65/X73/X20/X3A/X20/X34/X30/X2E/X30/XB1/X30/X2E/X32/X29 /X6D/X6D

/X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X41/X4E/X47/X4C/X45 /X31/X36/X2E/X35/X6D/X61/X78/X2E /X31/X33/X2E/X30/XB1/X30/X2E/X33 /X51/X54/X59/X2E/X31/X2C/X30/X30/X30 /X28/X36/X30/XB0/X29/X28/X36/X30/XB0/X29 /X4E/X6F/X2E/X20/X55/X50/X30/X30/X35/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X31 /X55/X50/X30/X30/X35/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X31 /X53/X4F/X54/X38/X39/X35/X2D/X41/X2D/X52/X65/X65/X6C /X45/X6E/X6C/X61/X72/X67/X65/X64/X20/X64/X72/X61/X77/X69/X6E/X67/X20/X69/X6E/X20/X74/X68/X65/X20/X63/X65/X6E/X74/X72/X61/X6C/X20/X70/X61/X72/X74 /X6D/X6D

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45 /X32/X2E/X39/X30/XB1/X30/X2E/X32 /X38/X35 /X30/X2E/X32/XB1/X30/X2E/X31 /X30/X2E/X36/X35/XB1/X30/X2E/X31 /X30/X2E/X31/X33/XB1/X30/X2E/X31/X31/X34 /X31/X2E/X38/X35 /X48/X54/X4D/X53/X4F/X50/X38/X2D/X41/X2D/X50/X4B/X47/X20/X44/X69/X6D/X65/X6E/X73/X69/X6F/X6E/X73 /X4E/X6F/X2E/X20/X46/X50/X30/X30/X38/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X32/X2E/X30 /X46/X50/X30/X30/X38/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X32/X2E/X30 /X6D/X6D

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45 /X30/X2E/X33/X30/XB1/X30/X2E/X30/X35 /X31/X2E/X30/X30/XB1/X30/X2E/X31 /X31/X2E/X30/X35/XB1/X30/X2E/X30/X35 /X31/X2E/X35 /X32/X2E/X30/X30/XB1/X30/X2E/X30/X35 /X34/X2E/X30/X30/XB1/X30/X2E/X31 /X33/X2E/X32/X35/XB1/X30/X2E/X30/X35 /X34/X2E/X30/X30/XB1/X30/X2E/X31 /X31/X34 /X35/X38 /X48/X54/X4D/X53/X4F/X50/X38/X2D/X41/X2D/X43/X61/X72/X72/X69/X65/X72/X20/X54/X61/X70/X65 /X46/X65/X65/X64/X20/X64/X69/X72/X65/X63/X74/X69/X6F/X6E /X4E/X6F/X2E/X20/X46/X50/X30/X30/X38/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X31/X2E/X30 /X46/X50/X30/X30/X38/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X31/X2E/X30 /X2B/X30/X2E/X31 /X20/X2D/X30 /X6D/X6D

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45 /X31/X36/X2E/X35/X6D/X61/X78/X2E /X31/X33/X2E/X30/XB1/X30/X2E/X33 /X51/X54/X59/X2E /X34/X2C/X30/X30/X30 /X28/X36/X30/XB0/X29/X28/X36/X30/XB0/X29 /X31/X33/XB1/X30/X2E/X32 /X45/X6E/X6C/X61/X72/X67/X65/X64/X20/X64/X72/X61/X77/X69/X6E/X67/X20/X69/X6E/X20/X74/X68/X65/X20/X63/X65/X6E/X74/X72/X61/X6C/X20/X70/X61/X72/X74 /X48/X54/X4D/X53/X4F/X50/X38/X2D/X41/X2D/X52/X65/X65/X6C /X4E/X6F/X2E/X20/X46/X50/X30/X30/X38/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X30 /X46/X50/X30/X30/X38/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X30 /X6D/X6D

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45 /X30/X2E/X33/X35 /X30/X2E/X36/X35 /X30/X2E/X36/X35 /X30/X2E/X36/X35 /X48/X54/X4D/X53/X4F/X50/X38/X2D/X41 /X20/X20/X20/X20/X20/X2D/X4C/X61/X6E/X64/X20/X52/X65/X63/X6F/X6D/X6D/X65/X6E/X64/X61/X74/X69/X6F/X6E /X4E/X6F/X2E/X20/X46/X50/X30/X30/X38/X2D/X41/X2D/X4C/X2D/X53/X44/X2D/X32/X2E/X30 /X46/X50/X30/X30/X38/X2D/X41/X2D/X4C/X2D/X53/X44/X2D/X32/X2E/X30 /X6D/X6D /X31/X2E/X39/X30

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45 /X32/X2E/X39/XB1/X30/X2E/X32 /X31/X2E/X39/XB1/X30/X2E/X32 /X30/X2E/X39/X35/XB1/X30/X2E/X31 /X30/X2E/X34/XB1/X30/X2E/X31 /X30/X2E/X31/X36 /X20/X2B/X30/X2E/X31 /X20/X2D/X30/X2E/X30/X36/X31/X32/X33 /X34/X35 /X4E/X6F/X2E/X20/X4D/X50/X30/X30/X35/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X31/X2E/X33 /X4D/X50/X30/X30/X35/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X31/X2E/X33 /X53/X4F/X54/X32/X33/X35/X2D/X41/X2D/X50/X4B/X47/X20/X44/X69/X6D/X65/X6E/X73/X69/X6F/X6E/X73 /X6D/X6D

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45 /XF8/X31/X2E/X35 /X2B/X30/X2E/X31 /X2D/X30 /X32/X2E/X30/XB1/X30/X2E/X30/X35 /XF8/X31/X2E/X30 /X2B/X30/X2E/X32 /X2D/X30 /X34/X2E/X30/XB1/X30/X2E/X31 /X31/X2E/X34/XB1/X30/X2E/X32 /X30/X2E/X32/X35/XB1/X30/X2E/X31 /X33/X2E/X32/XB1/X30/X2E/X32 /X31/X32/X33 /X34/X35 /X4E/X6F/X2E/X20/X4D/X50/X30/X30/X35/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X32/X2E/X31 /X4D/X50/X30/X30/X35/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X32/X2E/X31 /X53/X4F/X54/X32/X33/X35/X2D/X41/X2D/X43/X61/X72/X72/X69/X65/X72/X20/X54/X61/X70/X65 /X46/X65/X65/X64/X20/X64/X69/X72/X65/X63/X74/X69/X6F/X6E /X34/X2E/X30/XB1/X30/X2E/X31/X28/X31/X30/X20/X70/X69/X74/X63/X68/X65/X73/X3A/X34/X30/X2E/X30/XB1/X30/X2E/X32/X29 /X6D/X6D

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X55/X4E/X49/X54 /X53/X49/X49/X20/X53/X65/X6D/X69/X63/X6F/X6E/X64/X75/X63/X74/X6F/X72/X20/X43/X6F/X72/X70/X6F/X72/X61/X74/X69/X6F/X6E /X41/X4E/X47/X4C/X45 /X31/X32/X2E/X35/X6D/X61/X78/X2E /X39/X2E/X30/XB1/X30/X2E/X33 /XF8/X31/X33/XB1/X30/X2E/X32 /X28/X36/X30/XB0/X29 /X28/X36/X30/XB0/X29 /X51/X54/X59/X2E/X33/X2C/X30/X30/X30 /X4E/X6F/X2E/X20/X4D/X50/X30/X30/X35/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X31 /X4D/X50/X30/X30/X35/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X31 /X53/X4F/X54/X32/X33/X35/X2D/X41/X2D/X52/X65/X65/X6C /X45/X6E/X6C/X61/X72/X67/X65/X64/X20/X64/X72/X61/X77/X69/X6E/X67/X20/X69/X6E/X20/X74/X68/X65/X20/X63/X65/X6E/X74/X72/X61/X6C/X20/X70/X61/X72/X74 /X6D/X6D

Disclaimers (Handling Precautions) 1. All the information described herei n (product data, specifications, figures, tables, programs, algorithms and application circuit examples, etc.) is cu rrent as of publishing date of this document and is subject to change without notice. 2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of any specific mass-production design. SII Semiconductor Corporation is not responsible for damages caused by the reasons other than the products or infringement of third-party intellectual property rights and any other rights due to the use of the information described herein. 3. SII Semiconductor Corporation is not responsible for da mages caused by the incorrect information described herein. 4. Take care to use the products described herein within their specified ranges. Pay special attention to the absolute maximum ratings, operation voltage range and electrical characteristics, etc. SII Semiconductor Corporation is not re sponsible for damages caused by failures and/or accidents, etc. that occur due to the use of products outside their specified ranges. 5. When using the products described herei n, confirm their applicatio ns, and the laws and regulat ions of the region or country where they are used and verify suitability, safety and other factors for the intended use. 6. When exporting the products described herein, comply with the Foreign Exchange and Foreign Trade Act and all other export-related laws, and follow the required procedures. 7. The products described herein must not be used or provided (exported) for the purposes of the development of weapons of mass destruction or militar y use. SII Semiconductor Corporation is not responsible for any provision (export) to those whose purpose is to develop, manufacture, use or store nuclear, biol ogical or chemical weapons, missiles, or other military use. 8. The products described herein are not designed to be used as part of any device or equipment that may affect the human body, human life, or assets (such as medical equipment, disaster prevention sy stems, security systems, combustion control systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment, aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses. Do not use those products without the prior written permission of SII Semiconductor Corporation. Especially, the products described her ein cannot be used for life support dev ices, devices implanted in the human body and devices that directly affect human life, etc. Prior consultation with our sales office is required when considering the above uses. SII Semiconductor Corporation is not responsible for damages caused by unauthorized or unspecified use of our products. 9. Semiconductor products may fail or malfunction with some probability. The user of these products s hould therefore take responsibility to gi ve thorough consideration to safety design including redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social damage, etc. that may ensue from the products' failure or malfunction. The entire system must be sufficiently evaluated and applied on customer's own responsibility. 10. The products described herein are not designed to be radiation-proof. The necessary radiation measures should be taken in the product design by the customer depending on the intended use. 11. The products described herein do not affect human health under normal use. However, they contain chemical substances and heavy metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Take care when handling these with the bare hands to prevent injuries, etc. 12. When disposing of the products described herein, comply with the laws and ordinances of the country or region where they are used. 13. The information described herein contains copyright info rmation and know-how of SII Semiconductor Corporation. The information described herein does not convey any lic ense under any intellectual property rights or any other rights belonging to SII Semiconductor Corporation or a third party. Reproduction or copying of the information described herein for the purpose of disclosing it to a thir d-party without the express permission of SII Semiconductor Corporation is strictly prohibited. 14. For more details on the information de scribed herein, contact our sales office. 1.0-2016.01 www.sii-ic.com