S1004

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 42

Technical content

www.sii-ic.com BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN © Seiko Instruments Inc., 2014 Rev.2.1_00 Seiko Instruments Inc. 1 The S-1004 Series is a high-accuracy voltage detector develo ped using CMOS technology. The detection voltage is fixed internally with an accuracy of ±1.0% (−VDET(S) ≥ 2.2 V). It operates with current consumption of 500 nA typ. Apart from the power supply pin, the detection voltage input pi n (SENSE pin) is also prepared, so the output is stable even if the SENSE pin falls to 0 V. The release signal can be delayed by setting a capacitor externally, and the release delay time accuracy at Ta = +25°C is ±15%. Two output forms Nch open-drain output and CMOS output are available.  Features

• Detection voltage: 1.0 V to 5.0 V (0.1 V step)
• Detection voltage accuracy: ±1.0% (2.2 V ≤ −VDET(S) ≤ 5.0 V) ±22 mV (1.0 V ≤ −VDET(S) < 2.2 V)
• Current consumption: 500 nA typ.
• Operation voltage range: 0.95 V to 10.0 V
• Hysteresis width: 5% ± 2%
• Release delay time accuracy: ±15% (CD = 4.7 nF, Ta = +25°C)
• Output form: Nch open-drain output (Active "L") CMOS output (Active "L")
• Operation temperature range: Ta = −40°C to +85°C
• Lead-free (Sn 100%), halogen-free  Applications
• Power supply monitor for microcomputer and reset for CPU
• Constant voltage power supply monitor for TV, Blu-ray recorder and home appliance
• Power supply monitor for portable devices such as notebook PC, digital still camera and mobile phone  Packages
• SOT-23-5
• SNT-6A

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN Rev.2.1_00 S-1004 Series Seiko Instruments Inc. 3  Product Name Structure Users can select the output form and detecti on voltage value for the S-1004 Series. Refer to " 1. Product name " regarding the contents of product name, " 2. Function list of product types " regarding the product types, " 3. Packages " regarding the package drawings and " 4. Product name list " regarding details of product name. 1. Product name S-1004 x x xx I - xxxx U Package abbreviation and IC packing specifications*1 M5T1: SOT-23-5, Tape I6T1: SNT-6A, Tape Detection voltage value 10 to 50 (e.g., when the detection voltage is 1.0 V, it is expressed as 10.) Environmental code U: Lead-free (Sn 100%), halogen-free Operation temperature I: Ta = −40°C to +85°C Output form*3 N: Nch open-drain output (Active "L")*4 C: CMOS output (Active "L") *4 Pin configuration*2 A, B *1. Refer to the tape drawing. *2. Refer to " Pin Configurations". *3. Refer to "2. Function list of product types ". *4. If you request the product with output logic active "H", contact our sales office. 2. Function list of product types Table 1 Product Type Output Form Output Logic Pin Configuration Package NA Nch open-drain output Active "L" A SOT-23-5, SNT-6A NB Active "L" B SOT-23-5 CA CMOS output Active "L" A SOT-23-5, SNT-6A CB Active "L" B SOT-23-5 3. Packages Table 2 Package Drawing Codes Package Name Dimension Tape Reel Land SOT-23-5 MP005-A-P-SD MP005-A-C-SD MP005-A-R-SD − SNT-6A PG006-A-P-SD PG006-A-C- SD PG006-A-R-SD PG006-A-L-SD

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN S-1004 Series Rev.2.1_00 Seiko Instruments Inc. 4 4. Product name list 4. 1 S-1004 Series NA type Output form: Nch open-drain output (Active "L") Table 3 Detection Voltage SOT-23-5 SNT-6A

1.0 V ± 22 mV S-1004NA10I-M5T1U S-1004NA10I-I6T1U

1.1 V ± 22 mV S-1004NA11I-M5T1U S-1004NA11I-I6T1U

1.2 V ± 22 mV S-1004NA12I-M5T1U S-1004NA12I-I6T1U

1.3 V ± 22 mV S-1004NA13I-M5T1U S-1004NA13I-I6T1U

1.4 V ± 22 mV S-1004NA14I-M5T1U S-1004NA14I-I6T1U

1.5 V ± 22 mV S-1004NA15I-M5T1U S-1004NA15I-I6T1U

1.6 V ± 22 mV S-1004NA16I-M5T1U S-1004NA16I-I6T1U

1.7 V ± 22 mV S-1004NA17I-M5T1U S-1004NA17I-I6T1U

1.8 V ± 22 mV S-1004NA18I-M5T1U S-1004NA18I-I6T1U

1.9 V ± 22 mV S-1004NA19I-M5T1U S-1004NA19I-I6T1U

2.0 V ± 22 mV S-1004NA20I-M5T1U S-1004NA20I-I6T1U

2.1 V ± 22 mV S-1004NA21I-M5T1U S-1004NA21I-I6T1U

2.2 V ± 1.0% S-1004NA22I-M5T1U S-1004NA22I-I6T1U 2.3 V ± 1.0% S-1004NA23I-M5T1U S-1004NA23I-I6T1U 2.4 V ± 1.0% S-1004NA24I-M5T1U S-1004NA24I-I6T1U 2.5 V ± 1.0% S-1004NA25I-M5T1U S-1004NA25I-I6T1U 2.6 V ± 1.0% S-1004NA26I-M5T1U S-1004NA26I-I6T1U 2.7 V ± 1.0% S-1004NA27I-M5T1U S-1004NA27I-I6T1U 2.8 V ± 1.0% S-1004NA28I-M5T1U S-1004NA28I-I6T1U 2.9 V ± 1.0% S-1004NA29I-M5T1U S-1004NA29I-I6T1U 3.0 V ± 1.0% S-1004NA30I-M5T1U S-1004NA30I-I6T1U 3.1 V ± 1.0% S-1004NA31I-M5T1U S-1004NA31I-I6T1U 3.2 V ± 1.0% S-1004NA32I-M5T1U S-1004NA32I-I6T1U 3.3 V ± 1.0% S-1004NA33I-M5T1U S-1004NA33I-I6T1U 3.4 V ± 1.0% S-1004NA34I-M5T1U S-1004NA34I-I6T1U 3.5 V ± 1.0% S-1004NA35I-M5T1U S-1004NA35I-I6T1U 3.6 V ± 1.0% S-1004NA36I-M5T1U S-1004NA36I-I6T1U 3.7 V ± 1.0% S-1004NA37I-M5T1U S-1004NA37I-I6T1U 3.8 V ± 1.0% S-1004NA38I-M5T1U S-1004NA38I-I6T1U 3.9 V ± 1.0% S-1004NA39I-M5T1U S-1004NA39I-I6T1U 4.0 V ± 1.0% S-1004NA40I-M5T1U S-1004NA40I-I6T1U 4.1 V ± 1.0% S-1004NA41I-M5T1U S-1004NA41I-I6T1U 4.2 V ± 1.0% S-1004NA42I-M5T1U S-1004NA42I-I6T1U 4.3 V ± 1.0% S-1004NA43I-M5T1U S-1004NA43I-I6T1U 4.4 V ± 1.0% S-1004NA44I-M5T1U S-1004NA44I-I6T1U 4.5 V ± 1.0% S-1004NA45I-M5T1U S-1004NA45I-I6T1U 4.6 V ± 1.0% S-1004NA46I-M5T1U S-1004NA46I-I6T1U 4.7 V ± 1.0% S-1004NA47I-M5T1U S-1004NA47I-I6T1U 4.8 V ± 1.0% S-1004NA48I-M5T1U S-1004NA48I-I6T1U 4.9 V ± 1.0% S-1004NA49I-M5T1U S-1004NA49I-I6T1U 5.0 V ± 1.0% S-1004NA50I-M5T1U S-1004NA50I-I6T1U

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN Rev.2.1_00 S-1004 Series Seiko Instruments Inc. 5 4. 2 S-1004 Series NB type Output form: Nch open-drain output (Active "L") Table 4 Detection Voltage SOT-23-5

1.0 V ± 22 mV S-1004NB10I-M5T1U

1.1 V ± 22 mV S-1004NB11I-M5T1U

1.2 V ± 22 mV S-1004NB12I-M5T1U

1.3 V ± 22 mV S-1004NB13I-M5T1U

1.4 V ± 22 mV S-1004NB14I-M5T1U

1.5 V ± 22 mV S-1004NB15I-M5T1U

1.6 V ± 22 mV S-1004NB16I-M5T1U

1.7 V ± 22 mV S-1004NB17I-M5T1U

1.8 V ± 22 mV S-1004NB18I-M5T1U

1.9 V ± 22 mV S-1004NB19I-M5T1U

2.0 V ± 22 mV S-1004NB20I-M5T1U

2.1 V ± 22 mV S-1004NB21I-M5T1U

2.2 V ± 1.0% S-1004NB22I-M5T1U 2.3 V ± 1.0% S-1004NB23I-M5T1U 2.4 V ± 1.0% S-1004NB24I-M5T1U 2.5 V ± 1.0% S-1004NB25I-M5T1U 2.6 V ± 1.0% S-1004NB26I-M5T1U 2.7 V ± 1.0% S-1004NB27I-M5T1U 2.8 V ± 1.0% S-1004NB28I-M5T1U 2.9 V ± 1.0% S-1004NB29I-M5T1U 3.0 V ± 1.0% S-1004NB30I-M5T1U 3.1 V ± 1.0% S-1004NB31I-M5T1U 3.2 V ± 1.0% S-1004NB32I-M5T1U 3.3 V ± 1.0% S-1004NB33I-M5T1U 3.4 V ± 1.0% S-1004NB34I-M5T1U 3.5 V ± 1.0% S-1004NB35I-M5T1U 3.6 V ± 1.0% S-1004NB36I-M5T1U 3.7 V ± 1.0% S-1004NB37I-M5T1U 3.8 V ± 1.0% S-1004NB38I-M5T1U 3.9 V ± 1.0% S-1004NB39I-M5T1U 4.0 V ± 1.0% S-1004NB40I-M5T1U 4.1 V ± 1.0% S-1004NB41I-M5T1U 4.2 V ± 1.0% S-1004NB42I-M5T1U 4.3 V ± 1.0% S-1004NB43I-M5T1U 4.4 V ± 1.0% S-1004NB44I-M5T1U 4.5 V ± 1.0% S-1004NB45I-M5T1U 4.6 V ± 1.0% S-1004NB46I-M5T1U 4.7 V ± 1.0% S-1004NB47I-M5T1U 4.8 V ± 1.0% S-1004NB48I-M5T1U 4.9 V ± 1.0% S-1004NB49I-M5T1U 5.0 V ± 1.0% S-1004NB50I-M5T1U

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN S-1004 Series Rev.2.1_00 Seiko Instruments Inc. 6 4. 3 S-1004 Series CA type Output form: CMOS output (Active "L") Table 5 Detection Voltage SOT-23-5 SNT-6A

1.0 V ± 22 mV S-1004CA10I-M5T1U S-1004CA10I-I6T1U

1.1 V ± 22 mV S-1004CA11I-M5T1U S-1004CA11I-I6T1U

1.2 V ± 22 mV S-1004CA12I-M5T1U S-1004CA12I-I6T1U

1.3 V ± 22 mV S-1004CA13I-M5T1U S-1004CA13I-I6T1U

1.4 V ± 22 mV S-1004CA14I-M5T1U S-1004CA14I-I6T1U

1.5 V ± 22 mV S-1004CA15I-M5T1U S-1004CA15I-I6T1U

1.6 V ± 22 mV S-1004CA16I-M5T1U S-1004CA16I-I6T1U

1.7 V ± 22 mV S-1004CA17I-M5T1U S-1004CA17I-I6T1U

1.8 V ± 22 mV S-1004CA18I-M5T1U S-1004CA18I-I6T1U

1.9 V ± 22 mV S-1004CA19I-M5T1U S-1004CA19I-I6T1U

2.0 V ± 22 mV S-1004CA20I-M5T1U S-1004CA20I-I6T1U

2.1 V ± 22 mV S-1004CA21I-M5T1U S-1004CA21I-I6T1U

2.2 V ± 1.0% S-1004CA22I-M5T1U S-1004CA22I-I6T1U 2.3 V ± 1.0% S-1004CA23I-M5T1U S-1004CA23I-I6T1U 2.4 V ± 1.0% S-1004CA24I-M5T1U S-1004CA24I-I6T1U 2.5 V ± 1.0% S-1004CA25I-M5T1U S-1004CA25I-I6T1U 2.6 V ± 1.0% S-1004CA26I-M5T1U S-1004CA26I-I6T1U 2.7 V ± 1.0% S-1004CA27I-M5T1U S-1004CA27I-I6T1U 2.8 V ± 1.0% S-1004CA28I-M5T1U S-1004CA28I-I6T1U 2.9 V ± 1.0% S-1004CA29I-M5T1U S-1004CA29I-I6T1U 3.0 V ± 1.0% S-1004CA30I-M5T1U S-1004CA30I-I6T1U 3.1 V ± 1.0% S-1004CA31I-M5T1U S-1004CA31I-I6T1U 3.2 V ± 1.0% S-1004CA32I-M5T1U S-1004CA32I-I6T1U 3.3 V ± 1.0% S-1004CA33I-M5T1U S-1004CA33I-I6T1U 3.4 V ± 1.0% S-1004CA34I-M5T1U S-1004CA34I-I6T1U 3.5 V ± 1.0% S-1004CA35I-M5T1U S-1004CA35I-I6T1U 3.6 V ± 1.0% S-1004CA36I-M5T1U S-1004CA36I-I6T1U 3.7 V ± 1.0% S-1004CA37I-M5T1U S-1004CA37I-I6T1U 3.8 V ± 1.0% S-1004CA38I-M5T1U S-1004CA38I-I6T1U 3.9 V ± 1.0% S-1004CA39I-M5T1U S-1004CA39I-I6T1U 4.0 V ± 1.0% S-1004CA40I-M5T1U S-1004CA40I-I6T1U 4.1 V ± 1.0% S-1004CA41I-M5T1U S-1004CA41I-I6T1U 4.2 V ± 1.0% S-1004CA42I-M5T1U S-1004CA42I-I6T1U 4.3 V ± 1.0% S-1004CA43I-M5T1U S-1004CA43I-I6T1U 4.4 V ± 1.0% S-1004CA44I-M5T1U S-1004CA44I-I6T1U 4.5 V ± 1.0% S-1004CA45I-M5T1U S-1004CA45I-I6T1U 4.6 V ± 1.0% S-1004CA46I-M5T1U S-1004CA46I-I6T1U 4.7 V ± 1.0% S-1004CA47I-M5T1U S-1004CA47I-I6T1U 4.8 V ± 1.0% S-1004CA48I-M5T1U S-1004CA48I-I6T1U 4.9 V ± 1.0% S-1004CA49I-M5T1U S-1004CA49I-I6T1U 5.0 V ± 1.0% S-1004CA50I-M5T1U S-1004CA50I-I6T1U

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN Rev.2.1_00 S-1004 Series Seiko Instruments Inc. 7 4. 4 S-1004 Series CB type Output form: CMOS output (Active "L") Table 6 Detection Voltage SOT-23-5

1.0 V ± 22 mV S-1004CB10I-M5T1U

1.1 V ± 22 mV S-1004CB11I-M5T1U

1.2 V ± 22 mV S-1004CB12I-M5T1U

1.3 V ± 22 mV S-1004CB13I-M5T1U

1.4 V ± 22 mV S-1004CB14I-M5T1U

1.5 V ± 22 mV S-1004CB15I-M5T1U

1.6 V ± 22 mV S-1004CB16I-M5T1U

1.7 V ± 22 mV S-1004CB17I-M5T1U

1.8 V ± 22 mV S-1004CB18I-M5T1U

1.9 V ± 22 mV S-1004CB19I-M5T1U

2.0 V ± 22 mV S-1004CB20I-M5T1U

2.1 V ± 22 mV S-1004CB21I-M5T1U

2.2 V ± 1.0% S-1004CB22I-M5T1U 2.3 V ± 1.0% S-1004CB23I-M5T1U 2.4 V ± 1.0% S-1004CB24I-M5T1U 2.5 V ± 1.0% S-1004CB25I-M5T1U 2.6 V ± 1.0% S-1004CB26I-M5T1U 2.7 V ± 1.0% S-1004CB27I-M5T1U 2.8 V ± 1.0% S-1004CB28I-M5T1U 2.9 V ± 1.0% S-1004CB29I-M5T1U 3.0 V ± 1.0% S-1004CB30I-M5T1U 3.1 V ± 1.0% S-1004CB31I-M5T1U 3.2 V ± 1.0% S-1004CB32I-M5T1U 3.3 V ± 1.0% S-1004CB33I-M5T1U 3.4 V ± 1.0% S-1004CB34I-M5T1U 3.5 V ± 1.0% S-1004CB35I-M5T1U 3.6 V ± 1.0% S-1004CB36I-M5T1U 3.7 V ± 1.0% S-1004CB37I-M5T1U 3.8 V ± 1.0% S-1004CB38I-M5T1U 3.9 V ± 1.0% S-1004CB39I-M5T1U 4.0 V ± 1.0% S-1004CB40I-M5T1U 4.1 V ± 1.0% S-1004CB41I-M5T1U 4.2 V ± 1.0% S-1004CB42I-M5T1U 4.3 V ± 1.0% S-1004CB43I-M5T1U 4.4 V ± 1.0% S-1004CB44I-M5T1U 4.5 V ± 1.0% S-1004CB45I-M5T1U 4.6 V ± 1.0% S-1004CB46I-M5T1U 4.7 V ± 1.0% S-1004CB47I-M5T1U 4.8 V ± 1.0% S-1004CB48I-M5T1U 4.9 V ± 1.0% S-1004CB49I-M5T1U 5.0 V ± 1.0% S-1004CB50I-M5T1U

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN S-1004 Series Rev.2.1_00 Seiko Instruments Inc. 8  Pin Configurations 1. S-1004 Series NA / CA type 1. 1 SOT-23-5 13 2 Top view Figure 3 Table 7 Pin Configuration A Pin No. Symbol Description

1 OUT Voltage detection output pin

2 VDD Power supply pin

3 VSS GND pin

4 CD Connection pin for delay capacitor

5 SENSE Detection voltage input pin

1. 2 SNT-6A Top view Figure 4 Table 8 Pin Configuration A Pin No. Symbol Description

3 SENSE Detection voltage input pin

5 NC*1 No connection

6 VSS GND pin

*1. The NC pin is electrically open. The NC pin can be connected to the VDD pin or the VSS pin. 2. S-1004 Series NB / CB type 2. 1 SOT-23-5 13 2 Top view Figure 5 Table 9 Pin Configuration B Pin No. Symbol Description

2 VSS GND pin

3 VDD Power supply pin

4 SENSE Detection voltage input pin

5 CD Connection pin for delay capacitor

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN Rev.2.1_00 S-1004 Series Seiko Instruments Inc. 9  Absolute Maximum Ratings Table 10 (Ta = +25°C unless otherwise specified) Item Symbol Abso lute Maximum Rating Unit Power supply voltage V DD − VSS 12.0 V CD pin input voltage V CD V SS − 0.3 to VDD + 0.3 V SENSE pin input voltage V SENSE V SS − 0.3 to 12.0 V Output voltage Nch open-drain output product VOUT VSS − 0.3 to 12.0 V CMOS output product V SS − 0.3 to VDD + 0.3 V Output current I OUT 50 mA Power dissipation SOT-23-5 PD 600*1 mW SNT-6A 400*1 mW Operation ambient temperature T opr −40 to +85 °C Storage temperature T stg −40 to +125 °C *1. When mounted on board [Mounted board] (1) Board size: 114.3 mm × 76.2 mm × t1.6 mm (2) Name: JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefor e not be exceeded under any conditions. 0 50 100 150 Ambient Temperature (Ta) [°C] 200 100 300 500 700 400 600 SNT-6A SOT-23-5 Power Dissipation (PD) [mW] Figure 6 Power Dissipation of Package (When Mounted on Board)

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN S-1004 Series Rev.2.1_00 Seiko Instruments Inc. 10  Electrical Characteristics 1. Nch open-drain output product Table 11 (Ta = +25°C unless otherwise specified) Item Symbol Condition Min. Typ. Max. Unit Test Circuit Detection voltage*1 −VDET 0.95 V ≤ VDD ≤ 10.0 V 1.0 V ≤ −VDET(S) < 2.2 V −VDET(S) − 0.022 −VDET(S) −VDET(S) + 0.022 V 1 2.2 V ≤ −VDET(S) ≤ 5.0 V −VDET(S) × 0.99 −VDET(S) −VDET(S) × 1.01 V 1 Hysteresis width V HYS − −VDET × 0.03 −VDET × 0.05 −VDET × 0.07 V 1 Current consumption*2 ISS V DD = 10.0 V, VSENSE = −VDET(S) + 1.0 V − 0.50 0.90 μA 2 Operation voltage V DD − 0.95 − 10.0 V 1 Output current I OUT Output transistor Nch VDS *3 = 0.5 V VSENSE = 0.0 V VDD = 0.95 V 0.59 1.00 − mA 3 VDD = 1.2 V 0.73 1.33 − mA 3 VDD = 2.4 V 1.47 2.39 − mA 3 VDD = 4.8 V 1.86 2.50 − mA 3 Leakage current I LEAK Output transistor Nch VDD = 10.0 V, VDS *3 = 10.0 V, VSENSE = 10.0 V − − 0.08 μA 3 Detection voltage temperature coefficient*4 Δ−VDET ΔTa • −VDET Ta = −40°C to +85°C − ±100 ± 350 ppm/°C 1 Detection delay time*5 tDET V DD = 5.0 V − 40 − μs 4 Release SENSE pin *1. −VDET: Actual detection voltage value, −VDET(S): Set detection voltage value (the cent er value of the detection voltage range in Table 3 or Table 4) *2. The current flowing through the SENSE pin resistance is not included. *3. V DS: Drain-to-source voltage of the output transistor *4. The temperature change of the detection voltage [mV/ °C] is calculated by using the following equation. Δ−VDET ΔTa []mV/°C *1 = −VDET(S) (typ.)[]V *2 × Δ−VDET ΔTa • −VDET []ppm/°C *3 ÷ 1000 *1. Temperature change of the detection voltage *2. Set detection voltage *3. Detection voltage temperature coefficient *5. The time period from when the pulse voltage of 6.0 V → −VDET(S) − 2.0 V or 0 V is applied to the SENSE pin to when VOUT reaches VDD / 2, after the output pin is pulled up to 5.0 V by the resistance of 470 kΩ. *6. The time period from when the pulse voltage of 0.95 V → 10.0 V is applied to the SENSE pin to when V OUT reaches VDD × 90%, after the output pin is pulled up to VDD by the resistance of 100 kΩ.

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN Rev.2.1_00 S-1004 Series Seiko Instruments Inc. 11 2. CMOS output product Table 12 (Ta = +25°C unless otherwise specified) Item Symbol Condition Min. Typ. Max. Unit Test Circuit Detection voltage*1 −VDET 0.95 V ≤ VDD ≤ 10.0 V 1.0 V ≤ −VDET(S) < 2.2 V −VDET(S) − 0.022 −VDET(S) −VDET(S) + 0.022 V 1 2.2 V ≤ −VDET(S) ≤ 5.0 V −VDET(S) × 0.99 −VDET(S) −VDET(S) × 1.01 V 1 Hysteresis width V HYS − −VDET × 0.03 −VDET × 0.05 −VDET × 0.07 V 1 Current consumption*2 ISS V DD = 10.0 V, VSENSE = −VDET(S) + 1.0 V − 0.50 0.90 μA 2 Operation voltage V DD − 0.95 − 10.0 V 1 Output current I OUT Output transistor Nch VDS *3 = 0.5 V VSENSE = 0.0 V VDD = 0.95 V 0.59 1.00 − mA 3 VDD = 1.2 V 0.73 1.33 − mA 3 VDD = 2.4 V 1.47 2.39 − mA 3 VDD = 4.8 V 1.86 2.50 − mA 3 Output transistor Pch VDD = 4.8 V 1.62 2.60 − mA 5 VDS *3 = 0.5 V VSENSE = 10.0 V VDD = 6.0 V 1.78 2.86 − mA 5 Detection voltage temperature coefficient*4 Δ−VDET ΔTa • −VDET Ta = −40°C to +85°C − ±100 ± 350 ppm/°C 1 Detection delay time*5 tDET V DD = 5.0 V − 40 − μs 4 Release SENSE pin *1. −VDET: Actual detection voltage value, −VDET(S): Set detection voltage value (the cent er value of the detection voltage range in Table 5 or Table 6) *2. The current flowing through the SENSE pin resistance is not included. *3. V DS: Drain-to-source voltage of the output transistor *4. The temperature change of the detection voltage [mV/ °C] is calculated by using the following equation. Δ−VDET ΔTa []mV/°C *1 = −VDET(S) (typ.)[]V *2 × Δ−VDET ΔTa • −VDET []ppm/°C *3 ÷ 1000 *1. Temperature change of the detection voltage *2. Set detection voltage *3. Detection voltage temperature coefficient *5. The time period from when the pulse voltage of 6.0 V → −VDET(S) − 2.0 V or 0 V is applied to the SENSE pin to when VOUT reaches VDD / 2. *6. The time period from when the pulse voltage of 0.95 V → 10.0 V is applied to the SENSE pin to when V OUT reaches V DD × 90%.

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN S-1004 Series Rev.2.1_00 Seiko Instruments Inc. 18 2. SENSE pin 2. 1 Error when detection voltage is set externally By connecting a node that was resistance-divided by the resistor (R A) and the resistor (R B) to the SENSE pin as seen in Figure 26, the detection voltage can be set externally. For conventional products without the SENSE pin, R A cannot be too large since the resistance-divided node must be connected to the VDD pin. This is because a feed-through current will flow through the VDD pin when it goes from detection to release, and if R A is large, problems such as oscillation or larger error in the hysteresis width may occur. In the S-1004 Series, R A and RB are easily made larger since the resistance-divided node can be connected to the SENSE pin through which no feed-through cu rrent flows. However, be careful of error in the current flowing through the internal resistance (R SENSE) that will occur. Although RSENSE in the S-1004 Series is large (5 M Ω min.) to make the error small, R A and R B should be selected such that the error is within the allowable limits. 2. 2 Selection of R A and RB In Figure 26 , the relation between the external setting detection voltage (V DX) and the actual detection voltage (−VDET) is ideally calculated by the equation below. VDX = −VDET × ()1 + RA RB

• ·· (1) However, in reality there is an error in the current flowing through R SENSE. When considering this error, the relation between V DX and −VDET is calculated as follows. VDX = −VDET × ()1 + RA RB || RSENSE = −VDET ×  1 + RA RB × RSENSE RB + RSENSE = −VDET × ()1 + RA RB + RA RSENSE By using equations (1) and (2), the error is calculated as −VDET × RA RSENSE The error rate is calculated as follows by dividing the error by the right-hand side of equation (1). RA × RB RSENSE × (RA + RB) × 100 [%] = RA || RB RSENSE × 100 [%] ··· (3) As seen in equation (3), the smaller the resistance values of R A and R B compared to R SENSE, the smaller the error rate becomes. Also, the relation between the external setting hysteresis width (V HX) and the hysteresis width (V HYS) is calculated by equation below. Error due to R SENSE also occurs to the relation in a similar way to the detection voltage. VHX = V HYS × ()1 + RA RB
• ·· (4) VSS OUT VDD SENSE RA RB VDX −VDET CDRSENSE Figure 26 Detection Voltage External Setting Circuit Caution If R A and R B are large, the SENSE pin input impedance becomes higher and may cause a malfunction due to noise. In this case, connect a capacitor between the SENSE pin and the VSS pin.

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN Rev.2.1_00 S-1004 Series Seiko Instruments Inc. 21 3. Delay circuit The delay circuit has the function that adjusts the release delay time (t RESET) from when the SENSE pin voltage (VSENSE) reaches release voltage ( +VDET) to when the output from OUT pin inverts. tRESET is determined by the delay coefficient, the delay capacitor (C D), and the release delay time when the CD pin is open (tRESET0), and calculated by the equation below. tRESET [ms] = Delay coefficient × CD [nF] + tRESET0 [ms] Table 13 Operation Temperature Delay Coefficient Min. Typ. Max. Ta = +85°C 1.78 2.29 3.13 Ta = +25°C 2.30 2.66 3.07 Ta = −40°C 2.68 3.09 3.57 Table 14 Operation Temperature Release Delay Time when CD Pin is Open (t RESET0) Min. Typ. Max. Ta = +85°C 0.020 ms 0.049 ms 0.130 ms Ta = +25°C 0.021 ms 0.059 ms 0.164 ms Ta = −40°C 0.024 ms 0.074 ms 0.202 ms Caution 1. Mounted board layout should be made in such a way that no current flows into or flows from the CD pin since the impedance of the CD pin is high, otherwise correct delay time cannot be provided. 2. There is no limit for the capacitance of C D as long as the leakage current of the capacitor can be ignored against the built-in constant current value (30 nA to 200 nA). 3. The detection delay time (t DET) cannot be adjusted by C D.

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN S-1004 Series Rev.2.1_00 Seiko Instruments Inc. 22 4. Other characteristics 4. 1 Temperature characteristics of detection voltage The shaded area in Figure 32 shows the temperature characteristics of detection voltage in the operation temperature range. −40 +25 +0.945 mV/°C −VDET [V] +85 Ta [°C] −0.945 mV/°C −VDET25 *1. −VDET25 is a detection voltage value at Ta = +25°C. Figure 32 Temperature Characteristics of Detection Voltage (Example for −VDET = 2.7 V) 4. 2 Temperature characteristics of release voltage The temperature change Δ+VDET ΔTa of the release voltage is calculated by using the temperature change Δ−VDET ΔTa of the detection voltage as follows: Δ+VDET ΔTa = +VDET −VDET Δ−VDET ΔTa The temperature change of the release voltage and the detection voltage has the same sign consequently. 4. 3 Temperature characteristics of hysteresis voltage The temperature change of the hysteresis voltage is expressed as Δ+VDET ΔTa − Δ−VDET ΔTa and is calculated as follows: Δ+VDET ΔTa − Δ−VDET ΔTa = VHYS −VDET Δ−VDET ΔTa

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN Rev.2.1_00 S-1004 Series Seiko Instruments Inc. 23  Precautions

• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic protection circuit.
• In CMOS output product of the S-1004 Series, the feed-through current flows at the time of detection and release. If the VDD pin input impedance is high, malfunction may occur due to the voltage drop by the feed-through current when releasing.
• In CMOS output product, oscillation may occur if a pull-down resistor is connected and falling speed of the SENSE pin voltage (V SENSE) is slow near the detection voltage when the VDD pin and the SENSE pin are shorted.
• When designing for mass production using an applicati on circuit described herein, the product deviation and temperature characteristics of the external parts should be taken into consideration. SII shall not bear any responsibility for patent infringements related to products using the circuits described herein.
• SII claims no responsibility for any disputes arising out of or in connection with any infringement by products including this IC of patents owned by a third party.

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN S-1004 Series Rev.2.1_00 Seiko Instruments Inc. 24  Characteristics (Typical Data) 1. Detection voltage ( −VDET), Release voltage (+VDET) vs. Temperature (Ta) S-1004Cx10 V DD = 5.0 V 1.2 VDET, VDET [V] 40 85 755025025 Ta [C] 1.1 1.0 0.9 0.8 VDET VDET S-1004Cx24 V DD = 5.0 V 2.6 40 85 755025025 Ta [C] 2.5 2.4 2.3 2.2 VDET, VDET [V] VDET VDET S-1004Cx50 V DD = 5.0 V 5.4 40 85 755025025 Ta [C] 5.2 5.0 4.8 4.6 VDET, VDET [V] VDET VDET 2. Hysteresis width (V HYS) vs. Temperature (Ta) S-1004Cx10 V DD = 5.0 V VHYS [%] 40 85 755025025 Ta [C] 7.0 6.0 5.0 4.0 3.0 S-1004Cx24 V DD = 5.0 V VHYS [%] 40 85 755025025 Ta [C] 7.0 6.0 5.0 4.0 3.0 S-1004Cx50 V DD = 5.0 V VHYS [%] 40 85 755025025 Ta [C] 7.0 6.0 5.0 4.0 3.0

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN Rev.2.1_00 S-1004 Series Seiko Instruments Inc. 25 3. Detection voltage ( −VDET) vs. Power supply voltage (V DD) S-1004Cx10 1.030 1.020 1.010 1.000 0.990 0.980 0.970 V DD [V] VDET [V] Ta = 85C Ta = 25C Ta = 40C S-1004Cx24 2.430 2.420 2.410 2.400 2.390 2.380 2.370 V DD [V] VDET [V] Ta = 85C Ta = 25C Ta = 40C S-1004Cx50 5.050 VDD [V] VDET [V] 5.025 5.000 4.975 4.950 Ta = 85C Ta = 25C Ta = 40C 4. Hysteresis width (V HYS) vs. Power supply voltage (V DD) S-1004Cx10 VDD [V] 7.0 6.0 5.0 4.0 3.0 VHYS [%] Ta = 85C Ta = 25C Ta = 40C S-1004Cx24 VDD [V] 7.0 6.0 5.0 4.0 3.0 VHYS [%] Ta = 85CTa = 40C Ta = 25C S-1004Cx50 VDD [V] 7.0 6.0 5.0 4.0 3.0 VHYS [%] Ta = 40CTa = 25C Ta = 85C

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN S-1004 Series Rev.2.1_00 Seiko Instruments Inc. 26 5. Current consumption (I SS) vs. Power supply voltage (V DD) S-1004Cx10 Ta = +25°C, V SENSE = −VDET(S) − 0.1 V (during detection) 1.00 VDD [V] 0.80 0.60 0.40 0.20 0.00 ISS [A] S-1004Cx10 Ta = +25°C, V SENSE = −VDET(S) + 1.0 V (during release) 1.00 VDD [V] 0.80 0.60 0.40 0.20 0.00 ISS [A] S-1004Cx24 Ta = +25°C, V SENSE = −VDET(S) − 0.1 V (during detection) 1.00 VDD [V] 0.80 0.60 0.40 0.20 0.00 ISS [A] S-1004Cx24 Ta = +25°C, V SENSE = −VDET(S) + 1.0 V (during release) 1.00 VDD [V] 0.80 0.60 0.40 0.20 0.00 ISS [A] S-1004Cx50 Ta = +25°C, V SENSE = −VDET(S) − 0.1 V (during detection) 1.00 VDD [V] 0.80 0.60 0.40 0.20 0.00 ISS [A] S-1004Cx50 Ta = +25°C, V SENSE = −VDET(S) + 1.0 V (during release) 1.00 VDD [V] 0.80 0.60 0.40 0.20 0.00 ISS [A]

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN Rev.2.1_00 S-1004 Series Seiko Instruments Inc. 27 6. Current consumption (I SS) vs. SENSE pin input voltage (V SENSE) S-1004Cx10 Ta = +25°C, V DD = −VDET(S) + 1.0 V, VSENSE = 0.0 V → 10.0 V 1.00 VSENSE [V] 0.80 0.60 0.40 0.20 0.00 ISS [A] S-1004Cx24 Ta = +25°C, V DD = −VDET(S) + 1.0 V, VSENSE = 0.0 V → 10.0 V 1.00 VSENSE [V] 0.80 0.60 0.40 0.20 0.00 ISS [A] S-1004Cx50 Ta = +25°C, V DD = −VDET(S) + 1.0 V, VSENSE = 0.0 V → 10.0 V 1.00 VSENSE [V] 0.80 0.60 0.40 0.20 0.00 ISS [A] 7. Current consumption (I SS) vs. Temperature (Ta) S-1004Cx10 V DD = −VDET(S) + 1.0 V, V SENSE = −VDET(S) + 1.0 V (during release) 0.30 40 85 755025025 Ta [C] 0.25 0.20 0.15 0.10 0.05 0.00 ISS [A] S-1004Cx24 V DD = −VDET(S) + 1.0 V, V SENSE = −VDET(S) + 1.0 V (during release) 0.30 40 85 755025025 Ta [C] 0.25 0.20 0.15 0.10 0.05 0.00 ISS [A] S-1004Cx50 V DD = −VDET(S) + 1.0 V, V SENSE = −VDET(S) + 1.0 V (during release) 0.30 40 85 755025025 Ta [C] 0.25 0.20 0.15 0.10 0.05 0.00 ISS [A]

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN S-1004 Series Rev.2.1_00 Seiko Instruments Inc. 28 8. Nch transistor output current (I OUT) vs. VDS 9. Pch transistor output current (I OUT) vs. VDS S-1004Nx12 Ta = +25°C, V SENSE = 0.0 V (during detection) 20.0 0.0 0.0 6.0 IOUT [mA] VDS [V] 15.0 10.0 5.0 VDD = 6.0 VVDD = 4.8 V VDD = 3.6 V VDD = 2.4 V VDD = 1.2 V VDD = 0.95 V S-1004Cx12 Ta = +25°C, V SENSE = −VDET(S) + 1.0 V (during release) 40.0 0.0 0.0 10.0 IOUT [mA] VDS [V] 2.0 4.0 6.0 8.0 30.0 20.0 10.0 VDD = 8.4 V VDD = 1.2 V VDD = 0.95 V VDD = 7.2 V VDD = 6.0 V VDD = 4.8 V VDD = 3.6 V VDD = 2.4 V 10. Nch transistor output current (I OUT) vs. Power supply voltage (V DD) 11. Pch transistor output current (I OUT) vs. Power supply voltage (V DD) S-1004Nx12 V DS = 0.5 V, V SENSE = 0.0 V (during detection) 4.0 0.0 0.0 10.0 IOUT [mA] VDD [V] 3.0 2.0 1.0 2.0 4.0 6.0 8.0 Ta = 40C Ta = 25CTa = 85C S-1004Cx12 V DS = 0.5 V, V SENSE = −VDET(S) + 1.0 V (during release) 5.0 0.0 0.0 10.0 IOUT [mA] VDD [V] 2.0 4.0 6.0 8.0 4.0 3.0 2.0 1.0 Ta = 40C Ta = 25C Ta = 85C 12. Minimum operation voltage (V OUT) vs. Power supply voltage (V DD) S-1004Nx10 V SENSE = VDD, Pull-up to V DD, Pull-up resistance: 100 k Ω 1.8 0.0 0.0 1.6 VOUT [V] VDD [V] 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 Ta = 40C Ta = 25C Ta = 85C S-1004Nx10 V SENSE = VDD, Pull-up to 10 V, Pull-up resistance: 100 k Ω 12.0 0.0 0.0 1.6 VOUT [V] VDD [V] 10.0 8.0 6.0 4.0 2.0 Ta = 40C Ta = 25C Ta = 85C 13. Minimum operation voltage (V OUT) vs. SENSE pin input voltage (V SENSE) S-1004Nx10 V DD = 0.95 V, Pull-up to VDD, Pull-up resistance: 100 k Ω 1.8 0.0 0.0 1.6 VOUT [V] VSENSE [V] 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 Ta = 40C Ta = 25CTa = 85C S-1004Nx10 V DD = 0.95 V, Pull-up to 10 V, Pull-up resistance: 100 k Ω 12.0 0.0 0.0 1.6 VOUT [V] VSENSE [V] 10.0 8.0 6.0 4.0 2.0 Ta = 40C Ta = 25C Ta = 85C Remark V DS: Drain-to-source voltage of the output transistor

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN Rev.2.1_00 S-1004 Series Seiko Instruments Inc. 29 14. Dynamic response vs. Output pin capacitance (C OUT) (CD pin; open) S-1004Cx10 Ta = +25°C, V DD = −VDET(S) + 1.0 V 0.00001 Response time [ms]0.001 Output pin capacitance [F] 0.01 0.1 0.10.0001 0.010.001 tPLH tPHL S-1004Cx24 Ta = +25°C, V DD = −VDET(S) + 1.0 V 0.00001 Response time [ms]0.001 Output pin capacitance [F] 0.01 0.1 0.10.0001 0.010.001 tPHL tPLH S-1004Cx50 Ta = +25°C, V DD = −VDET(S) + 1.0 V 0.00001 Response time [ms]0.001 Output pin capacitance [F] 0.01 0.1 0.10.0001 0.010.001 tPLH tPHL S-1004Nx10 Ta = +25°C, V DD = −VDET(S) + 1.0 V 0.00001 Response time [ms]0.01 Output pin capacitance [F] 100 0.1 0.10.0001 0.010.001 tPHL tPLH S-1004Nx24 Ta = +25°C, V DD = −VDET(S) + 1.0 V 0.00001 Response time [ms]0.01 Output pin capacitance [F] 100 0.1 0.10.0001 0.010.001 tPHL tPLH S-1004Nx50 Ta = +25°C, V DD = −VDET(S) + 1.0 V 0.00001 Response time [ms]0.01 Output pin capacitance [F] 100 0.1 0.10.0001 0.010.001 tPHL tPLH

BUILT-IN DELAY CIRCUIT (EXTERNAL DELAY TIME SETTING) VOLTAGE DETECTOR WITH SENSE PIN Rev.2.1_00 S-1004 Series Seiko Instruments Inc. 31 15. Release delay time (t RESET) vs. CD pin capacitance (CD) (Without output pin capacitance) S-1004Cx10 Ta = +25°C, V DD = −VDET(S) + 1.0 V 0.01 0.1 1 10 100 0.01 10000 1000 1000 100 0.1 tRESET [ms] CD [nF] S-1004Cx24 Ta = +25°C, V DD = −VDET(S) + 1.0 V 0.01 0.1 1 10 100 0.01 10000 1000 1000 100 0.1 tRESET [ms] CD [nF] S-1004Cx50 Ta = +25°C, V DD = −VDET(S) + 1.0 V 0.01 0.1 1 10 100 0.01 10000 1000 1000 100 0.1 tRESET [ms] CD [nF] 16. Release delay time (t RESET) vs. Temperature (Ta) S-1004Cx10 CD = 4.7 nF, VDD = −VDET(S) + 1.0 V tRESET [ms] 40 85 755025025 Ta [C] S-1004Cx24 CD = 4.7 nF, VDD = −VDET(S) + 1.0 V tRESET [ms] 40 85 755025025 Ta [C] S-1004Cx50 CD = 4.7 nF, VDD = −VDET(S) + 1.0 V tRESET [ms] 40 85 755025025 Ta [C]

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X53/X43/X41/X4C/X45 /X55/X4E/X49/X54 /X53/X65/X69/X6B/X6F/X20/X49/X6E/X73/X74/X72/X75/X6D/X65/X6E/X74/X73/X20/X49/X6E/X63/X2E /X32/X2E/X39/XB1/X30/X2E/X32 /X31/X2E/X39/XB1/X30/X2E/X32 /X30/X2E/X39/X35/XB1/X30/X2E/X31 /X30/X2E/X34/XB1/X30/X2E/X31 /X30/X2E/X31/X36/X20/X2B/X30/X2E/X31 /X20/X2D/X30/X2E/X30/X36/X31/X32/X33 /X34/X35 /X4E/X6F/X2E/X20/X4D/X50/X30/X30/X35/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X31/X2E/X32 /X4D/X50/X30/X30/X35/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X31/X2E/X32 /X53/X4F/X54/X32/X33/X35/X2D/X41/X2D/X50/X4B/X47/X20/X44/X69/X6D/X65/X6E/X73/X69/X6F/X6E/X73 /X6D/X6D

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X53/X43/X41/X4C/X45 /X55/X4E/X49/X54 /X53/X65/X69/X6B/X6F/X20/X49/X6E/X73/X74/X72/X75/X6D/X65/X6E/X74/X73/X20/X49/X6E/X63/X2E /XF8/X31/X2E/X35 /X2B/X30/X2E/X31 /X2D/X30 /X32/X2E/X30/XB1/X30/X2E/X30/X35 /XF8/X31/X2E/X30 /X2B/X30/X2E/X32 /X2D/X30 /X34/X2E/X30/XB1/X30/X2E/X31 /X31/X2E/X34/XB1/X30/X2E/X32 /X30/X2E/X32/X35/XB1/X30/X2E/X31 /X33/X2E/X32/XB1/X30/X2E/X32 /X31/X32/X33 /X34/X35 /X4E/X6F/X2E/X20/X4D/X50/X30/X30/X35/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X32/X2E/X31 /X4D/X50/X30/X30/X35/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X32/X2E/X31 /X53/X4F/X54/X32/X33/X35/X2D/X41/X2D/X43/X61/X72/X72/X69/X65/X72/X20/X54/X61/X70/X65 /X46/X65/X65/X64/X20/X64/X69/X72/X65/X63/X74/X69/X6F/X6E /X34/X2E/X30/XB1/X30/X2E/X31/X28/X31/X30/X20/X70/X69/X74/X63/X68/X65/X73/X3A/X34/X30/X2E/X30/XB1/X30/X2E/X32/X29 /X6D/X6D

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X53/X43/X41/X4C/X45 /X55/X4E/X49/X54 /X53/X65/X69/X6B/X6F/X20/X49/X6E/X73/X74/X72/X75/X6D/X65/X6E/X74/X73/X20/X49/X6E/X63/X2E /X31/X32/X2E/X35/X6D/X61/X78/X2E /X39/X2E/X30/XB1/X30/X2E/X33 /XF8/X31/X33/XB1/X30/X2E/X32 /X28/X36/X30/XB0/X29 /X28/X36/X30/XB0/X29 /X51/X54/X59/X2E /X33/X2C/X30/X30/X30 /X4E/X6F/X2E/X20/X4D/X50/X30/X30/X35/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X31 /X4D/X50/X30/X30/X35/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X31 /X53/X4F/X54/X32/X33/X35/X2D/X41/X2D/X52/X65/X65/X6C /X45/X6E/X6C/X61/X72/X67/X65/X64/X20/X64/X72/X61/X77/X69/X6E/X67/X20/X69/X6E/X20/X74/X68/X65/X20/X63/X65/X6E/X74/X72/X61/X6C/X20/X70/X61/X72/X74 /X6D/X6D

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X53/X43/X41/X4C/X45 /X55/X4E/X49/X54/X6D/X6D /X53/X65/X69/X6B/X6F/X20/X49/X6E/X73/X74/X72/X75/X6D/X65/X6E/X74/X73/X20/X49/X6E/X63/X2E /X53/X4E/X54/X2D/X36/X41/X2D/X41/X2D/X50/X4B/X47/X20/X44/X69/X6D/X65/X6E/X73/X69/X6F/X6E/X73 /X50/X47/X30/X30/X36/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X32/X2E/X30 /X4E/X6F/X2E/X20/X50/X47/X30/X30/X36/X2D/X41/X2D/X50/X2D/X53/X44/X2D/X32/X2E/X30 /X30/X2E/X32/XB1/X30/X2E/X30/X35 /X30/X2E/X34/X38/XB1/X30/X2E/X30/X32 /X30/X2E/X30/X38/X2B/X30/X2E/X30/X35 /X2D/X30/X2E/X30/X32 /X30/X2E/X35 /X31/X2E/X35/X37/XB1/X30/X2E/X30/X33 /X31/X32 /X33 /X34/X35/X36

/X46/X65/X65/X64/X20/X64/X69/X72/X65/X63/X74/X69/X6F/X6E /X34/X2E/X30/XB1/X30/X2E/X31/X32/X2E/X30/XB1/X30/X2E/X30/X35 /X34/X2E/X30/XB1/X30/X2E/X31 /XF8/X31/X2E/X35 /X2B/X30/X2E/X31 /X20/X2D/X30 /XF8/X30/X2E/X35 /X31/X2E/X38/X35/XB1/X30/X2E/X30/X35 /X30/X2E/X36/X35/XB1/X30/X2E/X30/X35 /X30/X2E/X32/X35/XB1/X30/X2E/X30/X35 /X35/XB0 /X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X53/X43/X41/X4C/X45 /X55/X4E/X49/X54 /X6D/X6D /X53/X65/X69/X6B/X6F/X20/X49/X6E/X73/X74/X72/X75/X6D/X65/X6E/X74/X73/X20/X49/X6E/X63/X2E /X50/X47/X30/X30/X36/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X31/X2E/X30 /X53/X4E/X54/X2D/X36/X41/X2D/X41/X2D/X43/X61/X72/X72/X69/X65/X72/X20/X54/X61/X70/X65 /X4E/X6F/X2E/X20/X50/X47/X30/X30/X36/X2D/X41/X2D/X43/X2D/X53/X44/X2D/X31/X2E/X30 /X2B/X30/X2E/X31 /X20/X2D/X30 /X31/X32 /X34 /X33 /X35/X36

/X31/X32/X2E/X35/X6D/X61/X78/X2E /X39/X2E/X30/XB1/X30/X2E/X33 /XF8/X31/X33/XB1/X30/X2E/X32 /X28/X36/X30/XB0/X29 /X28/X36/X30/XB0/X29 /X51/X54/X59/X2E /X4E/X6F/X2E/X20/X50/X47/X30/X30/X36/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X30 /X50/X47/X30/X30/X36/X2D/X41/X2D/X52/X2D/X53/X44/X2D/X31/X2E/X30 /X45/X6E/X6C/X61/X72/X67/X65/X64/X20/X64/X72/X61/X77/X69/X6E/X67/X20/X69/X6E/X20/X74/X68/X65/X20/X63/X65/X6E/X74/X72/X61/X6C/X20/X70/X61/X72/X74 /X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X53/X43/X41/X4C/X45 /X55/X4E/X49/X54/X6D/X6D /X53/X65/X69/X6B/X6F/X20/X49/X6E/X73/X74/X72/X75/X6D/X65/X6E/X74/X73/X20/X49/X6E/X63/X2E /X53/X4E/X54/X2D/X36/X41/X2D/X41/X2D/X52/X65/X65/X6C /X35/X2C/X30/X30/X30/X20

/X4E/X6F/X2E /X54/X49/X54/X4C/X45 /X53/X43/X41/X4C/X45 /X55/X4E/X49/X54 /X6D/X6D /X53/X4E/X54/X2D/X36/X41/X2D/X41/X2D/X4C/X61/X6E/X64/X20/X52/X65/X63/X6F/X6D/X6D/X65/X6E/X64/X61/X74/X69/X6F/X6E /X53/X65/X69/X6B/X6F/X20/X49/X6E/X73/X74/X72/X75/X6D/X65/X6E/X74/X73/X20/X49/X6E/X63/X2E /X50/X47/X30/X30/X36/X2D/X41/X2D/X4C/X2D/X53/X44/X2D/X34/X2E/X30/X4E/X6F/X2E/X20/X50/X47/X30/X30/X36/X2D/X41/X2D/X4C/X2D/X53/X44/X2D/X34/X2E/X30 /X30/X2E/X33/X30/X2E/X32 /X30/X2E/X35/X32 /X31/X2E/X33/X36 /X30/X2E/X35/X32 /X31 /X32 /X43/X61/X75/X74/X69/X6F/X6E /X31/X2E/X20/X44/X6F/X20/X6E/X6F/X74/X20/X64/X6F/X20/X73/X69/X6C/X6B/X73/X63/X72/X65/X65/X6E/X20/X70/X72/X69/X6E/X74/X69/X6E/X67/X20/X61/X6E/X64/X20/X73/X6F/X6C/X64/X65/X72/X20/X70/X72/X69/X6E/X74/X69/X6E/X67/X20/X75/X6E/X64/X65/X72/X20/X74/X68/X65/X20/X6D/X6F/X6C/X64/X20/X72/X65/X73/X69/X6E/X20/X6F/X66/X20/X74/X68/X65/X20/X70/X61/X63/X6B/X61/X67/X65/X2E /X32/X2E/X20/X54/X68/X65/X20/X74/X68/X69/X63/X6B/X6E/X65/X73/X73/X20/X6F/X66/X20/X74/X68/X65/X20/X73/X6F/X6C/X64/X65/X72/X20/X72/X65/X73/X69/X73/X74/X20/X6F/X6E/X20/X74/X68/X65/X20/X77/X69/X72/X65/X20/X70/X61/X74/X74/X65/X72/X6E/X20/X75/X6E/X64/X65/X72/X20/X74/X68/X65/X20/X70/X61/X63/X6B/X61/X67/X65/X20/X73/X68/X6F/X75/X6C/X64/X20/X62/X65/X20/X30/X2E/X30/X33/X20/X6D/X6D /X20/X6F/X72/X20/X6C/X65/X73/X73/X20/X66/X72/X6F/X6D/X20/X74/X68/X65/X20/X6C/X61/X6E/X64/X20/X70/X61/X74/X74/X65/X72/X6E/X20/X73/X75/X72/X66/X61/X63/X65/X2E /X33/X2E/X20/X4D/X61/X74/X63/X68/X20/X74/X68/X65/X20/X6D/X61/X73/X6B/X20/X61/X70/X65/X72/X74/X75/X72/X65/X20/X73/X69/X7A/X65/X20/X61/X6E/X64/X20/X61/X70/X65/X72/X74/X75/X72/X65/X20/X70/X6F/X73/X69/X74/X69/X6F/X6E/X20/X77/X69/X74/X68/X20/X74/X68/X65/X20/X6C/X61/X6E/X64/X20/X70/X61/X74/X74/X65/X72/X6E/X2E /X34/X2E/X20/X52/X65/X66/X65/X72/X20/X74/X6F/X20/X22/X53/X4E/X54/X20/X50/X61/X63/X6B/X61/X67/X65/X20/X55/X73/X65/X72/X27/X73/X20/X47/X75/X69/X64/X65/X22/X20/X66/X6F/X72/X20/X64/X65/X74/X61/X69/X6C/X73/X2E /X31/X2E/X20 /X28/X30/X2E/X32/X35/X20/X6D/X6D/X20/X6D/X69/X6E/X2E/X20/X2F/X20/X30/X2E/X33/X30/X20/X6D/X6D/X20/X74/X79/X70/X2E/X29 /X32/X2E/X20 /X20/X28/X31/X2E/X33/X30/X20/X6D/X6D/X20/X7E/X20/X31/X2E/X34/X30/X20/X6D/X6D/X29 /X30/X2E/X30/X33/X20/X6D/X6D /X53/X4E/X54 /X31/X2E/X20/X50/X61/X79/X20/X61/X74/X74/X65/X6E/X74/X69/X6F/X6E/X20/X74/X6F/X20/X74/X68/X65/X20/X6C/X61/X6E/X64/X20/X70/X61/X74/X74/X65/X72/X6E/X20/X77/X69/X64/X74/X68/X20/X28/X30/X2E/X32/X35/X20/X6D/X6D/X20/X6D/X69/X6E/X2E/X20/X2F/X20/X30/X2E/X33/X30/X20/X6D/X6D/X20/X74/X79/X70/X2E/X29/X2E /X32/X2E/X20/X44/X6F/X20/X6E/X6F/X74/X20/X77/X69/X64/X65/X6E/X20/X74/X68/X65/X20/X6C/X61/X6E/X64/X20/X70/X61/X74/X74/X65/X72/X6E/X20/X74/X6F/X20/X74/X68/X65/X20/X63/X65/X6E/X74/X65/X72/X20/X6F/X66/X20/X74/X68/X65/X20/X70/X61/X63/X6B/X61/X67/X65/X20/X20/X28/X20/X31/X2E/X33/X30/X20/X6D/X6D/X20/X7E/X20/X31/X2E/X34/X30/X20/X6D/X6D/X20/X29/X2E /X31/X2E /X32/X2E/X20 ˞2. ৥ᇕ㺙Ё䯈ᠽሩ⛞Ⲭ῵ᓣ (1.30 mm ~ 1.40 mm)DŽ ⊼ᛣ1. ϱ㔥ǃ⛞䫵DŽ 2. ೼ᇕ㺙ϟǃᏗ㒓Ϟⱘ䰏⛞㝰८ᑺ (Ң⛞Ⲭ῵ᓣ㸼䴶䍋) ೼0.03 mmҹϟDŽ 3. ᥽㝰ⱘᓔষሎᇌ੠ᓔষԡ㕂䇋Ϣ⛞Ⲭ῵ᓣᇍ唤DŽ 4. ᆍ䇋খ䯙 "SNTᇕ㺙ⱘᑨ⫼ᣛफ"DŽ

www.sii-ic.com

• The information described herein is subject to change without notice.
• Seiko Instruments Inc. is not responsible for any pr oblems caused by circuits or diagrams described herein whose related industrial properties, patents, or ot her rights belong to third parties. The application circuit examples explain typical applications of the products, and do not guarant ee the success of any specific mass-production design.
• When the products described herein are regulated produ cts subject to the Wassenaar Arrangement or other agreements, they may not be exported without authorization from the appropriate governmental authority.
• Use of the information described he rein for other purposes and/or repr oduction or copying without the express permission of Seiko Instruments Inc. is strictly prohibited.
• The products described herein cannot be used as par t of any device or equipment affecting the human body, such as exercise equipment, medical equipment, security systems, gas equi pment, vehicle equipment, in-vehicle equipment, aviation equipment, aerospace equipment, and nuclear-related equipment, without prior written permission of Seiko Instruments Inc.
• The products described herein are not designed to be radiation-proof.
• Although Seiko Instruments Inc. exerts the greatest possible effort to ensure high quality and reliability, the failure or malfunction of semiconductor products may oc cur. The user of these products should therefore give thorough consideration to safety design, in cluding redundancy, fire-prevention measures, and malfunction prevention, to prevent any accidents, fires, or community damage that may ensue.