MSC9926W MORESEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

20V(D-S) Dual N-Channel Enhancement Mode Power MOS FET General Features

  • V DS =20V,I D =6A R DS(ON) < 28m Ω @ V GS =4.5V R DS(ON) < 37mΩ @ V GS =2.5V
  • High density cell design for ultra low Rdson
  • Fully characterized avalanche voltage and current Application
  • Power switching application
  • Hard switched and high frequency circuits
  • Uninterruptible power supply Schematic diagram Marking and pin Assignment SOP-8 top view Package Marking and Ordering Information Device Marking Device Device Package Reel Size Tape width Quantity MSC9926W SOP-8 Ø330mm 12mm 2500 units Absolute Maximum Ratings (T A =25℃unless otherwise noted) Parameter Symbol Limit Unit Drain-Source Voltage V DS 20 V Gate-Source Voltage V GS ±10 V Drain Current-Continuous I D 6 A Drain Current-Continuous(T C =100℃) I D (100℃) 3.8 A Pulsed Drain Current I DM 25 A Maximum Power Dissipation P D 1.25 W Operating Junction and Storage Temperature Range T J STG -55 To 150 ℃ Thermal Characteristic Thermal Resistance,Junction-to-Ambient (Note 2) R θJA 100 /W℃ PIN Configuration Lead Free MORE Semiconductor Company Limited http://www.moresemi.com 1/6

Electrical Characteristics (T A =25℃unless otherwise noted) Parameter Symbol Condition Min Typ Max Unit Off Characteristics Drain-Source Breakdown Voltage BV DSS V GS =0V I D =250μA 20 22 - V Zero Gate Voltage Drain Current I DSS V DS =20V,V GS =0V - - 1 μA Gate-Body Leakage Current I GSS V GS =±10V,V DS =0V - - ±100 nA On Characteristics (Note 3) Gate Threshold Voltage V GS(th) V DS GS D =250μA 0.5 1.2 V V GS =4.5V, I D =6A - 21 28 Drain-Source On-State Resistance R DS(ON) V GS =2.5V, I D =5A - 26 37 mΩ Forward Transconductance g FS V DS =5V,I D =6A 20 - - S Dynamic Characteristics (Note4) Input Capacitance C lss - 640 - PF Output Capacitance C oss - 140 - PF Reverse Transfer Capacitance C rss V DS =10V,V GS =0V, F=1.0MHz - 80 - PF Switching Characteristics (Note 4) Turn-on Delay Time t d(on) - 8 - nS Turn-on Rise Time t r - 9 - nS Turn-Off Delay Time t d(off) - 15 - nS Turn-Off Fall Time t f V DD =10V,I D =1A V GEN =4.5V,R G =6Ω - 4 - nS Total Gate Charge Q g - 10 - nC Gate-Source Charge Q gs - 1.5 - nC Gate-Drain Charge Q gd V DS =10V,I D =3A, V GS =4.5V - 1.6 - nC Drain-Source Diode Characteristics Diode Forward Voltage (Note 3) V SD V GS =0V,I S =1.7A - - 1.2 V Diode Forward Current (Note 2) I S - - 6 A Notes: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. Surface Mounted on FR4 Board, t ≤ 10 sec. 3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%. 4. Guaranteed by design, not subject to production MORE Semiconductor Company Limited http://www.moresemi.com 2/6 MSC9926W

1) E AS Test Circuits 2) Gate Charge Test Circuit: 3) Switch Time Test Circuit： MORE Semiconductor Company Limited http://www.moresemi.com 3/6 MSC9926W

Dimensions In Millimeters Dimensions In Inches Symbol Min. Max. Min. Max. A 1.350 1.750 0.053 0.069 A1 0.100 0.250 0.004 0.010 A2 1.350 1.550 0.053 0.061 b 0.330 0.510 0.013 0.020 c 0.170 0.250 0.006 0.010 D 4.700 5.100 0.185 0.200 E 3.800 4.000 0.150 0.157 E1 5.800 6.200 0.228 0.244 e 1.270(BSC) 0.050(BSC) L 0.400 1.270 0.016 0.050 θ 0° 8° 0° 8° MORE Semiconductor Company Limited http://www.moresemi.com 6/6 MSC9926W