HSB-9465SH HITEC-RCD | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Ver2.1 ■ This product should not be used directly on the human body for medical purposes. ■ This product should not be used for war weapons. ■ All specifications are subject to change without notice. https://www.hiteccs.com HSB-9465SH General Specification. Control System PWM - Position Sensor Type Contact Analog Potentiometer - Motor Type BLDC At the Max voltage, it is recommended to be used only for a short time duration. Operating Voltage Range 4.0 ~ 8.4V Voltage - 6.0V 7.4V No Load Speed - 0.09sec/60˚ 0.07sec/60˚ measurement environment Stall Torque - 13.5kgf·cm (187.5 oz·in) 13.5kgf·cm (187.5 oz·in) Peak Efficiency Torque - 2.7kgf·cm (37.5 oz·in) 2.7kgf·cm (37.5 oz·in) Standing Current - 30mA 30mA No Load Running Current - 250mA 250mA Stall Current - 1,100mA 900mA Deadband - 1µs 1µs Operating Travel Default: ±60º, Programmable: Max 160º / Pulse Width: 900~2100μs(Center:1500μs) - Continuous Rotation n/a - Operating Temperature Range -20˚C ~ +60˚C (-4˚F ~+140˚F) - Storage Temperature Range -30˚C ~ +80˚C (-22˚F ~+176˚F) - Connector Wire Length 300mm (11.811inch) Connector Wire Gauge 20AWG Weight 62.0g (2.187oz) Excluding the weight of Horn Bearing Type 2 Ball Bearing - Case Material Engineering Plastic - Gear Material 1 Metal-Plastic & 3 Steel Gears - Gear Train Backlash Max 0.5˚ - Horn Gear Spline 25T(Ø6) - IP-Rating IP54 - Servo Amplifier Type 16bit Programmable Digital - 1:1 scale (Unit : mm[inch])