DB951WP HITEC-RCD | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Ver2.1 ■ This product should not be used directly on the human body for medical purposes. ■ This product should not be used for war weapons. ■ All specifications are subject to change without notice. https://www.hiteccs.com DB951WP General Specification. Control System PWM/TTL(Half Duplex) - Position Sensor Type Contact Analog Potentiometer - Motor Type BLDC At the Max voltage, it is recommended to be used only for a short time duration. Operating Voltage Range 4.0 ~ 8.4V Voltage - 6.0V 7.4V No Load Speed - 0.12sec/60˚ 0.10sec/60˚ measurement environment Stall Torque - 38.0kgf·cm (527.72oz·in) 38.0kgf·cm (527.72oz·in) Peak Efficiency Torque - 7.6kgf·cm (105.54oz·in) 7.6kgf·cm (105.54oz·in) Standing Current - 35mA 35mA No Load Running Current - 350mA 350mA Stall Current - 8,000mA 6,500mA Deadband - 1µs 1µs Operating Travel Default: ±60º, Programmable: Max 260º / Pulse Width: 900~2100μs(Center:1500μs) - Continuous Rotation n/a - Operating Temperature Range -20˚C ~ +60˚C (-4˚F ~+140˚F) - Storage Temperature Range -30˚C ~ +80˚C (-22˚F ~+176˚F) - Connector Wire Length 300mm (11.811inch) Connector Wire Gauge 20AWG Weight 90.0g (3.175oz) Excluding the weight of Horn Bearing Type 2 Ball Bearing - Case Material Aluminum Alloy - Gear Material 5 Hardened Steel Gears - Gear Train Backlash Max 0.5˚ - Horn Gear Spline 25T(Ø6) - IP-Rating IP67 - Servo Amplifier Type 16bit programmable Digital - 1:1 scale (Unit : mm[inch])