H11L1

H11L1 SYC | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

DESCRIPTION

The H11LX series has a high speed integrated circuit detector optically coupled to a gallium-arsenide infrared emitting diode. The output incorporates a Schmitt trig- ger, which provides hysteresis for noise immunity and pulse shaping. The detector circuit is optimized for sim- plicity of operation and utilizes an open collector output for maximum application flexibility. 6-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M H11L3M

APPLICATIONS

• Logic to logic isolator
• Programmable current level sensor
• Line receiver eliminate noise and transient problems
• A.C. to TTL conversion square wave shaping
• Digital programming of power supplies
• Interfaces computers with peripherals

FEATURES

• High data rate, 1 MHz typical (NRZ)
• Free from latch up and oscilliation throughout voltage and temperature ranges.
• Microprocessor compatible drive
• Logic compatible output sinks 16 mA at 0.4 V maximum
• Guaranteed on/off threshold hysteresis
• Wide supply voltage capability, compatible with all popular logic systems
• Underwriter Laboratory (UL) recognized file #E90700

5 GND

Parameters Symbol Device Value Units TOTAL DEVICE TSTG All -55 to +150 °CStorage Temperature Operating Temperature T OPR All -40 to +85 °C Lead Solder Temperature T SOL All 260 for 10 sec °C Total Device Power Dissipation @ 25°C PD All 250 mW Derate Above 25°C 2.94 mW/°C EMITTER IF All 60 mAContinuous Forward Current Reverse Voltage V R All 6 V Forward Current - Peak (1 µs pulse, 300 pps) I F(pk) All 3.0 A LED Power Dissipation 25°C Ambient PD All 120 mW Derate Linearly From 25°C 1.41 mW/°C DETECTOR Detector Power Dissipation @ 25°C PD All 150 mW Derate Linearly from 25°C 2.0 mW/°C V45 Allowed Range V O All 0 to 16 V V65 Allowed Range V CC All 3 to 16 V I4 Output Current I O All 50 mA ABSOLUTE MAXIMUM RATINGS

Parameters Test Conditions Symbol Device Min Typ Max Units EMITTER Reverse Current VR = 3 V IR All 10 µA Capacitance V = 0, f = 1.0 MHz CJ All 100 pF DETECTOR Operating Voltage Range VCC All 3 15 V Supply Current I F = 0, VCC = 5V I CC(off) All 1.6 5.0 mA Output Current, High I F = 0, VCC = VO = 15V I OH All 100 µA INDIVIDUAL COMPONENT CHARACTERISTICS ELECTRICAL CHARACTERISTICS (TA = 25°C Unless otherwise specified.) Parameters Test Conditions Symbol Min Typ Max Units Input-Output Isolation Voltage t =1 sec. V ISO 7500 V PEAK Isolation Capacitance VI-O = 0V, f = 1 MHz CISO 0.4 0.6 pF Isolation Resistance V I-O = ±500 VDC R ISO 1011 ! ISOLATION CHARACTERISTICS 6-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M H11L3M

DC Characteristics Test Conditions Symbol Device Min Typ Max Units Supply Current I F = 10mA, VCC = 5V I CC(on) All 1.6 5.0 mA Output Voltage, low RL=270 Ω ,V CC =5V,I F=I F(on) max. VOL All 0.2 0.4 V H11L1M 1.6 Turn-On Threshold Current RL = 270Ω , VCC = 5V I F(on)* H11L2M 10.0 mA H11L3M 5.0 Turn-Off Threshold Current RL = 270Ω , VCC = 5V I F(off) All 0.3 1.0 mA Hysteresis Ratio R L = 270Ω , VCC = 5V I F(off)/IF(on) All 0.50 0.75 0.90 AC Characteristics Test Conditions Symbol Device Min Typ Max Units SWITCHING SPEED 1.0 Turn-On time RL=270 Ω ,VCC=5V,IF=IF(on) ,TA=25°C ton All 0.65 µs 0.1 Fall Time RL=270 Ω ,VCC=5V,IF=IF(on) ,TA=25°C tf All .05 µs 0.1 2.0 Turn-Off Time RL=270 Ω ,VCC=5V,IF=IF(on) ,TA=25°C toff All 1.2 µs 0.1 Rise time RL=270 Ω ,VCC=5V,IF=IF(on) ,TA=25°C tr All 0.07 µs 0.1 Data Rate All 1.0 MHz TRANSFER CHARACTERISTICS NOTE: *Maximum IF(ON) is the maximum current required to trigger the output. For example, a 1.6mA maximum trigger current would require the LED to be driven at a current greater than 1.6mA to guarantee the device will turn on. A 10% guard band is recommended to account for degradation of the LED over its lifetime. The maximum allowable LED drive current is 60mA. 6-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M H11L3M

Figure 6. Supply Current vs. Supply Voltage Figure 7. LED Forward Voltage vs. Forward Current

0.070 (1.78) 0.060 (1.52) 0.030 (0.76) 0.100 (2.54) 0.305 (7.75) 0.425 (10.79) Recommended Pad Layout for Surface Mount Leadform Package Dimensions (Surface Mount) 0.350 (8.89) 0.320 (8.13) 0.260 (6.60) 0.240 (6.10) 0.390 (9.90) 0.332 (8.43) 0.070 (1.77) 0.040 (1.02) 0.014 (0.36) 0.010 (0.25) 0.320 (8.13) 0.035 (0.88) 0.006 (0.16) 0.012 (0.30) 0.008 (0.20) 0.200 (5.08) 0.115 (2.93) 0.025 (0.63) 0.020 (0.51) 0.020 (0.50) 0.016 (0.41) 0.100 [2.54] Package Dimensions (Through Hole) 0.350 (8.89) 0.320 (8.13) 0.260 (6.60) 0.240 (6.10) 0.320 (8.13) 0.070 (1.77) 0.040 (1.02) 0.014 (0.36) 0.010 (0.25) 0.200 (5.08) 0.115 (2.93) 0.100 (2.54) 0.015 (0.38) 0.020 (0.50) 0.016 (0.41) 0.100 (2.54) 15° 0.012 (0.30) Package Dimensions (0.4”Lead Spacing) 0.350 (8.89) 0.320 (8.13) 0.260 (6.60) 0.240 (6.10) 0.070 (1.77) 0.010 (0.25) 0.200 (5.08) 0.115 (2.93) 0.020 (0.50) 0.016 (0.41) 0.100 [2.54] 0.100 (2.54) 0.015 (0.38) 0.012 (0.30) 0.008 (0.21) 0.425 (10.80) 0.400 (10.16) NOTE All dimensions are in inches (millimeters) 6-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M H11L3M

SR2 Surface Mount; Tape and reel T 0.4” Lead Spacing V VDE 0884 TV VDE 0884, 0.4” Lead Spacing 5V VDE 0884, Surface Mount SR2V VDE 0884, Surface Mount, Tape & Reel Option/Order Entry Identifier Description

ORDERING INFORMATION

4.0 ± 0.1 Ø1.5 MIN User Direction of Feed 2.0 ± 0.05 1.75 ± 0.10 11.5 ± 1.0 24.0 ± 0.3 12.0 ± 0.1

0.30 MAX

21.0 ± 0.1 4.5 ± 0.20 0.1 MAX 10.1 ± 0.20 9.1 ± 0.20 Ø1.5 ± 0.1/-0 Carrier Tape Specifications (“D” Taping Orientation) NOTE All dimensions are in inches (millimeters) 6-PIN DIP OPTOISOLATORS LOGIC OUTPUT H11L1M H11L2M H11L3M