GP401DDM18 DYNEX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures.1/7 www.dynexsemi.com
FEATURES
I Low VCE(SAT) I 400A Per Switch I High Thermal Cycling Capability I Non Punch Through Silicon I Isolated MMC Base with AlN Substrates
APPLICATIONS
I Low Loss System Retrofit The Powerline range of high power modules includes dual and single switch configurations covering voltages from 1200V to 3300V and currents up to 4800A. The GP401DDM18 is a dual switch 1800V, n channel enhancement mode, insulated gate bipolar transistor (IGBT) module. Designed with low V CE(SAT) to minimise conduction losses, the module is of particular relevance in low to medium frequency applications. The IGBT has a wide reverse bias safe operating area (RBSOA) ensuring reliability in demanding applications. This device is optimised for traction drives and other applications requiring high thermal cycling capability. The module incorporates an electrically isolated base plate and low inductance construction enabling circuit designers to optimise circuit layouts and utilise earthed heat sinks for safety.
ORDERING INFORMATION
Order As: GP401DDM18 Note: When ordering, please use the complete part number. KEY PARAMETERS VCES 1800V VCE(sat) (typ) 2.6V IC (max) 400A IC(PK) (max) 800A GP401DDM18 Hi-Reliability Dual Switch Low VCE(SAT) IGBT Module Advance Information DS5397-1.2 January 2001 Fig. 1 Dual switch circuit diagram Fig. 2 Electrical connections - (not to scale) Outline type code: D (See Package Details for further information) 3(C1)4(E2)2(C2) 12(C2) 7(C1) 11(G2) 10(E2) 5(E1) 6(G1) 1(E1) 2412
2/7 Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures. www.dynexsemi.com Test Conditions Continuous dissipation - junction to case Continuous dissipation - junction to case Mounting torque 5Nm (with mounting grease) Transistor Diode Mounting - M6 Electrical connections - M4 Electrical connections - M8 Parameter Thermal resistance - transistor (per arm) Thermal resistance - diode (per arm) Thermal resistance - case to heatsink (per module) Junction temperature Storage temperature range Screw torque THERMAL AND MECHANICAL RATINGS ABSOLUTE MAXIMUM RATINGS - PER ARM Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. In extreme conditions, as with all semiconductors, this may include potentially hazardous rupture of the package. Appropriate safety precautions should always be followed. Exposure to Absolute Maximum Ratings may affect device reliability. T case = 25˚C unless stated otherwise Symbol VCES VGES IC IC(PK) Pmax Visol Test Conditions VGE = 0V Tcase = 80˚C for Tj = 125˚C 1ms, Tcase = 110˚C Tcase = 25˚C, Tj = 150˚C Commoned terminals to base plate. AC RMS, 1 min, 50Hz Units V V A A W V Max. 1800 ±20 400 800 3000 4000 Parameter Collector-emitter voltage Gate-emitter voltage Continuous collector current Peak collector current Max. transistor power dissipation Isolation voltage Symbol R th(j-c) R th(j-c) R th(c-h) Tj Tstg Units ˚C/kW ˚C/kW ˚C/kW Nm Nm Nm Max. 150 125 125 Min. –40
Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures.3/7 www.dynexsemi.com Test Conditions VGE = 0V, VCE = VCES VGE = 0V, VCE = VCES , Tcase = 125˚C VGE = ±20V, VCE = 0V IC = 20mA, VGE = VCE VGE = 15V, IC = 400A VGE = 15V, IC = 400A, , Tcase = 125˚C DC t p = 1ms IF = 400A IF = 400A, Tcase = 125˚C VCE = 25V, VGE = 0V, f = 1MHz Parameter Collector cut-off current Gate leakage current Gate threshold voltage Collector-emitter saturation voltage Diode forward current Diode maximum forward current Diode forward voltage Input capacitance Module inductance
ELECTRICAL CHARACTERISTICS
Tcase = 25˚C unless stated otherwise. Symbol ICES IGES VGE(TH) VCE(sat) IF IFM VF C ies LM Units mA mA µA V V V A A V V nF nH Max. 6.5 3.2 400 800 2.5 2.6 Typ. 5.5 2.6 3.3 2.2 2.3 Min. 4.5
4/7 Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures. www.dynexsemi.com Units ns ns mJ ns ns mJ µC A mJ Max. 1100 400 250 650 400 230 100 Typ. 900 330 180 500 200 200 250 Min. Test Conditions IC = 400A VGE = ±15V VCE = 900V R G(ON) = RG(OFF) = 2.2Ω L ~ 100nH IF = 400A, VR = 50% VCES , dIF/dt = 3000A/µs Parameter Turn-off delay time Fall time Turn-off energy loss Turn-on delay time Rise time Turn-on energy loss Diode reverse recovery charge Diode reverse current Diode reverse recovery energy Tcase = 25˚C unless stated otherwise Symbol td(off) tf EOFF td(on) tr EON Q rr Irr EREC Tcase = 125˚C unless stated otherwise Units ns ns mJ ns ns mJ µC A mJ Max. 1200 500 320 800 400 270 150 Typ. 1010 450 250 600 310 200 110 300 190 Min. Test Conditions IC = 400A VGE = ±15V VCE = 900V R G(ON) = RG(OFF) = 2.2Ω L ~ 100nH IF = 400A, VR = 50% VCES , dIF/dt = 2500A/µs Parameter Turn-off delay time Fall time Turn-off energy loss Turn-on delay time Rise time Turn-on energy loss Diode reverse recovery charge Diode reverse current Diode reverse recovery energy Symbol t d(off) tf EOFF td(on) tr EON Q rr Irr EREC
Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures.5/7 www.dynexsemi.com PACKAGE DETAILS For further package information, please visit our website or contact your nearest Customer Service Centre. All dimensions in mm, unless stated otherwise. DO NOT SCALE. 140 31.5 4x M8 6x M4 182613 11.5 3514 20 43.3 11.85 57 57 65 65 6x Ø 7 132416 Nominal weight: 1050g Module outline type code: D
6/7 Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures. www.dynexsemi.com ASSOCIATED PUBLICATIONS Title Application Note Number Electrostatic handling precautions AN4502 An introduction to IGBTs AN4503 IGBT ratings and characteristics AN4504 Heatsink requirements for IGBT modules AN4505 Calculating the junction temperature of power semiconductors AN4506 Gate drive considerations to maximise IGBT efficiency AN4507 Parallel operation of IGBTs – punch through vs non-punch through characteristics AN4508 Guidance notes for formulating technical enquiries AN4869 Principle of rating parallel connected IGBT modules AN5000 Short circuit withstand capability in IGBTs AN5167 Driving Dynex Semincoductor IGBT modules with Concept gate drivers AN5384 POWER ASSEMBLY CAPABILITY The Power Assembly group was set up to provide a support service for those customers requiring more than the basic semiconductor, and has developed a flexible range of heatsink and clamping systems in line with advances in device voltages and current capability of our semiconductors. We offer an extensive range of air and liquid cooled assemblies covering the full range of circuit designs in general use today. The Assembly group continues to offer high quality engineering support dedicated to designing new units to satisfy the growing needs of our customers. Using the latest CAD methods our team of design and applications engineers aim to provide the Power Assembly Complete Solution (PACs). HEATSINKS The Power Assembly group has its own proprietary range of extruded aluminium heatsinks. They have been designed to optimise the performance of Dynex semiconductors. Data with respect to air natural, forced air and liquid cooling (with flow rates) is available on request. For further information on device clamps, heatsinks and assemblies, please contact your nearest sales representative or customer service office.
Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures.7/7 www.dynexsemi.com CUSTOMER SERVICE CENTRES Central Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33 North America Tel: 011-800-5554-5554. Fax: 011-800-5444-5444 UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020 SALES OFFICES Central Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33 Tel: (949) 733-3005. Fax: (949) 733-2986. UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020 These offices are supported by Representatives and Distributors in many countries world-wide. © Dynex Semiconductor 2001 Publication No. DS5397-1 Issue No. 1.2 January 2001 TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRINTED IN UNITED KINGDOM HEADQUARTERS OPERATIONS DYNEX SEMICONDUCTOR LTD Doddington Road, Lincoln. Lincolnshire. LN6 3LF. United Kingdom. Tel: 00-44-(0)1522-500500 Fax: 00-44-(0)1522-500550 DYNEX POWER INC.
99 Bank Street, Suite 410,
Ottawa, Ontarion, Canada, K1P 6B9 Tel: 613.723.7035 Fax: 613.723.1518 Toll Free: 1.888.33.DYNEX (39639) This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request. All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners. http://www.dynexsemi.com e-mail: power_solutions@dynexsemi.com Datasheet Annotations: Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:- Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started. Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change. Advance Information: The product design is complete and final characterisation for volume production is well in hand. No Annotation: The product parameters are fixed and the product is available to datasheet specification.