DFM200PXM33-A000 DYNEX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

www.dynexsemi.com DFM200PXM33-A000

FEATURES

I Low Reverse Recovery Charge I High Switching Speed I Low Forward Voltage Drop I Isolated Base I MMC Baseplate With AlN Substrates

APPLICATIONS

I Boost and Buck Converters I Free-wheel Circuits I Snubber Circuits I Resonant Converters I Induction Heating I Multi-level Switch Inverters The DFM200PXM33-A000 module houses a series connected pair of 3300 volt, fast recovery diodes (FRDs). Designed for low power loss, the module is suitable for a variety of high voltage applications in motor drives and power conversion. Fast switching times and low reverse recovery losses allow high frequency operation making the device suitable for the latest drive designs employing pwm and high frequency switching. These modules incorporate electrically isolated base plates and low inductance construction enabling circuit designers to optimise circuit layouts and utilise grounded heat sinks for safety.

ORDERING INFORMATION

Order As: DFM200PXM33-A000 Note: When ordering, please use the complete part number. DFM200PXM33-A000 Fast Recovery Diode Module Preliminary Information DS5496-1.3 September 2001 KEY PARAMETERS VRRM 3300V VF (typ) 2.5V IF (max) 200A IFM (max) 400A Fig. 1 Circuit diagram Fig. 2 Electrical connections - (not to scale) Outline type code: P (See package details for further information)

www.dynexsemi.com Units V A A kA W kV pC ABSOLUTE MAXIMUM RATINGS Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. In extreme conditions, as with all semiconductors, this may include potentially hazardous rupture of the package. Appropriate safety precautions should always be followed. Exposure to Absolute Maximum Ratings may affect device reliability. T case = 25˚C unless stated otherwise Symbol VRRM IF IFM I2t Pmax Visol Q pd Test Conditions Tvj = 125˚C DC, Tcase = 70˚C Tcase = 115˚C, tp = 1ms VR = 0, tp = 10ms, Tvj = 125˚C Tcase = 25˚C, Tvj = 125˚C Commoned terminals to base plate. AC RMS, 1 min, 50Hz IEC1287. V 1 = 2450V, V2 = 1800V, 50Hz RMS Max. 3300 200 400 925 6.0 Parameter Repetitive peak reverse voltage Forward current (per arm) Max. forward current I 2t value fuse current rating Maximum power dissipation Isolation voltage Partial discharge Test Conditions Continuous dissipation - junction to case Mounting torque 5Nm (with mounting grease) Mounting - M6 Electrical connections - M5 Parameter Thermal resistance - diode (per arm) Thermal resistance - case to heatsink (per module) Junction temperature Storage temperature range Screw torque THERMAL AND MECHANICAL RATINGS Symbol R th(j-c) R th(c-h) Tj Tstg Units ˚C/kW ˚C/kW Nm Nm Max. 108 125 125 Typ. Min. –40 Internal insulation: AlN Baseplate material: AlSiC Creepage distance: 20mm Clearance: 10mm CTI (Critical Tracking Index): 175

www.dynexsemi.com DFM200PXM33-A000 Test Conditions VR = 3300V, Tvj = 125˚C IF = 200A IF = 200A, Tvj = 125˚C Parameter Peak reverse current Forward voltage Inductance STATIC ELECTRICAL CHARACTERISTICS Tvj = 25˚C unless stated otherwise. Symbol IRM VF L Units mA V V nH Max. Typ. 2.5 2.5 Min. Test Conditions IF = 200A, dIF/dt = 1100A/µs, VR = 1800V Parameter Reverse recovery current Reverse recovery charge Reverse recovery energy Symbol I rr Q rr Erec Units A µC mJ Max. Typ. 165 115 130 Min. DYNAMIC ELECTRICAL CHARACTERISTICS Tvj = 25˚C unless stated otherwise. Tvj = 125˚C unless stated otherwise. Test Conditions IF = 200A, dIF/dt = 1000A/µs, VR = 1800V Parameter Reverse recovery current Reverse recovery charge Reverse recovery energy Symbol I rr Q rr Erec Units A µC mJ Max. Typ. 185 190 220 Min.

www.dynexsemi.com TYPICAL CHARACTERISTICS Fig. 2 Diode typical forward characteristics Fig. 4 Transient thermal impedance Fig. 5 Power dissipation Fig. 6DC current rating vs case temperature 100 200 300 400 500 600 700 800 900 1000 02 5 5 0 7 5 1 0 0 1 2 5 1 5 0 Case temperature, Tcase - (°C) Power dissipation, Ptot - (W) 100 150 200 250 300 350 0 25 50 75 100 125 150 Case temperature, Tcase - (°C) DC forward current, IF - (A) 100 1000 0.001 0.01 1 0.1 10 Pulse width, tp - (s) Transient thermal impedance, Zth (j-c) - (°C/kW ) Ri (˚C/KW) τi (ms) 2.9545 0.0843 15.6459 3.7205 22.2515 33.2138 67.3233 236.5275 Diode 100 150 200 250 300 350 400 Forward voltage, VF - (V) Forward current, IF - (A) Tj = 25˚C Tj = 125˚C

www.dynexsemi.com DFM200PXM33-A000 Fig. 7 RBSOA 100 200 300 150 250 350 0 500 1000 1500 2000 2500 3000 3500 Reverse voltage, V R - (V) Reverse recovery current, Irr - (A) Tj = 125˚C

www.dynexsemi.com PACKAGE DETAILS For further package information, please contact your local Customer Service Centre. All dimensions in mm, unless stated otherwise. DO NOT SCALE. Nominal weight: 550g Module outline type code: P

www.dynexsemi.com DFM200PXM33-A000 POWER ASSEMBLY CAPABILITY The Power Assembly group was set up to provide a support service for those customers requiring more than the basic semiconductor, and has developed a flexible range of heatsink and clamping systems in line with advances in device voltages and current capability of our semiconductors. We offer an extensive range of air and liquid cooled assemblies covering the full range of circuit designs in general use today. The Assembly group continues to offer high quality engineering support dedicated to designing new units to satisfy the growing needs of our customers. Using the latest CAD methods our team of design and applications engineers aim to provide the Power Assembly Complete Solution (PACs). HEATSINKS The Power Assembly group has its own proprietary range of extruded aluminium heatsinks. They have been designed to optimise the performance of Dynex semiconductors. Data with respect to air natural, forced air and liquid cooling (with flow rates) is available on request. For further information on device clamps, heatsinks and assemblies, please contact your nearest sales representative or customer service office. CUSTOMER SERVICE CENTRES Mainland Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33 North America Tel: (613) 723-7035. Fax: (613) 723-1518. UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020 SALES OFFICES Mainland Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33 Tel: (949) 733-3005. Fax: (949) 733-2986. UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020 These offices are supported by Representatives and Distributors in many countries world-wide. © Dynex Semiconductor 2001 Publication No. DS5496-1 Issue No. 1.3 September 2001 TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRINTED IN UNITED KINGDOM HEADQUARTERS OPERATIONS DYNEX SEMICONDUCTOR LTD Doddington Road, Lincoln. Lincolnshire. LN6 3LF. United Kingdom. Tel: 00-44-(0)1522-500500 Fax: 00-44-(0)1522-500550 DYNEX POWER INC.

99 Bank Street, Suite 410,

Ottawa, Ontario, Canada, K1P 6B9 Tel: 613.723.7035 Fax: 613.723.1518 Toll Free: 1.888.33.DYNEX (39639) This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request. All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners. http://www.dynexsemi.com e-mail: power_solutions@dynexsemi.com Datasheet Annotations: Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:- Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started. Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change. Advance Information: The product design is complete and final characterisation for volume production is well in hand. No Annotation: The product parameters are fixed and the product is available to datasheet specification.