DC210 DYNEX | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
210 Centres Bar Clamp
Replaces DS6378-1 DS6378-2 May 2022 LN41757 www.dynexsemi.com
DESCRIPTION
Dynex offers a range of standard clamps designed to accommodate press pack semiconductors with tie rod centres f rom 75mm to 210mm and clamping force from 5kN to 138kN. The set clamps use Disc Springs to DIN 2092/2093 to apply the clamping f orce over a wide temperature range. The clamps also incorporate pressure indicators to make installation simple. Isolation is provided by high quality ceramic insulators and PTFE sleeving. Zinc plating with a Yellow Passivated finish is used for enhanced corrosion protection. If a clamp you require is not available in our standard range, Dynex can provide a clamping solution to your individual needs. Speak to your local sales representative for details.
ORDERING INFORMATION
Example Part Number: DC210/120/200/R DC210 – Clamp Series This is a Dynex clamp with tie rod centres of 210mm 120 – Clamping Force This is the required clamping force of the semiconductor device in kN 200 – Dimension ‘Y’ (see figure 2) This is the total distance of all the parts to be clamped, plus the bottom reaction bar if fitted R – Bottom Reaction Bar fitted (optional) If using a heatsink of suitable strength and stiffness the bottom reaction bar is not necessary, and the ‘R’ can be omitted from the part number Tie Rod Centres (mm) 210 Forces available (kN) 83, 120, 138 The DC 210 has been designed to support the common semiconductor packages shown below. Dynex Outline Flange Diameter (mm) Height (mm) A 150 35 H 172 35 M 150 26.5 Figure 1: Clamp General Assembly
www.dynexsemi.com All dimensions in mm, unless stated otherwise. DO NOT SCALE. Figure 2: Clamp Outline IMPORTANT INFORMATION:
www.dynexsemi.com This publication is provided for information only and not for resale. The products and information in this publication are intended for use by appropriately trained technical personnel. Due to the diversity of product applications, the information contained herein is provided as a general guide only and does n ot constitute any guarantee of suitability for use in a specific application . The user must evaluate the suitability of the product and the completeness of the product data for the application. The user is responsible for product selection and ensuring all safety and any warning requi rements are met. Should additional product information be needed please contact Customer Service. Although we have endeavoured to carefully compile the information in this publication it may contain inaccuracies or typograp hical errors. The information is provided without any warranty or guarantee of any kind. This publication is an uncontrolled document and is subject to change without notice. When referring to it please ensure that it is the most up to date version and has not been superseded. The products are not intended for use in applications where a failure or malfunction may cause loss of life, injury or damage to prope rty. The user must ensure that appropriate safety precautions are taken to prevent or mitigate the consequences of a product failure or malfunction. The products must not be touched when operating because there is a danger of electrocution or severe burning. Always use prot ective safety equipment such as appropriate shields for the product and wear safety glasses. Even when disconnec ted any electric charge remaining in the product must be discharged and allowed to cool before safe handling using protective gloves. Extended exposure to conditions outside the product ratings may affect reliability leading to premature product failure. Use outside the product ratings is likely to cause permanent damage to the product. In extreme conditions, as with all semiconductors, this may inclu de potentially hazardous rupture, a large current to flow or high voltage arcing, resulting in fire or expl osion. Appropriate application design and safety precautions should always be followed to protect persons and property. Product Status & Product Ordering: We annotate datasheets in the top right hand corner of the front page, to indicate product status if it is not yet fully approved for production. The annotations are as follows: Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started. Provisional Information: Some initial development work has been performed. The datasheet represents a view of the end product based on very limited information. Certain details will change. Preliminary Information: The product design is complete and final ch aracterisation for volume production is in progress. The datasheet represents the product as it is now understood but details may change. No Annotation: The product has been approved for production and unless otherwise notified by Dynex any product ordered will be supplied to the current version of the data sheet prevailing at the time of our order acknowledgement. All products and materials are sold and services provided subject to Dynex’s conditions of sale, which are available on request. Any brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners. HEADQUARTERS OPERATIONS DYNEX SEMICONDUCTOR LIMITED Doddington Road, Lincoln, Lincolnshire. LN6 3LF United Kingdom. Phone: +44 (0) 1522 500500 Fax: +44 (0) 1522 500550 Web: http://www.dynexsemi.com CUSTOMER SERVICE Phone: +44 (0) 1522 502753 / 502901 e-mail: powersolutions@dynexsemi.com Dynex Semiconductor Ltd 2021. Technical Documentation – Not for resale.