DAC0808

DAC0808 SYC | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 11

Technical content

Features

n Relative accuracy:±0.19% error maximum n Full scale current match:±1 LSB typ n Fast settling time: 150 ns typ n Noninverting digital inputs are TTL and CMOS compatible n High speed multiplying input slew rate: 8 mA/µs n Power supply voltage range:±4.5V to±18V n Low power consumption: 33 mW@ ±5V Block and Connection Diagrams DS005687-1 Dual-In-Line Package DS005687-2 Top View Order Number DAC0808 See NS Package M16A or N16A DAC0808 8-Bit D/A Converter

Block and Connection Diagrams(Continued)

Ordering Information

TEMPERATURE RANGE N PACKAGE (N16A) (Note 1) SO PACKAGE (M16A) 8-bit 0˚C ≤TA≤+75˚C DAC0808LCN MC1408P8 DAC0808LCM Note 1:Devices may be ordered by using either order number. Small-Outline Package DS005687-13 DAC0808

Absolute Maximum Ratings(Note 2) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Power Supply Voltage V CC +18 VDC VEE −18 VDC Digital Input Voltage, V5–V12 −10 V DC to +18 VDC Applied Output Voltage, VO −11 VDC to +18 VDC Reference Current, I14 5m A Reference Amplifier Inputs, V14, V15 V CC ,V EE Power Dissipation (Note 4) 1000 mW ESD Susceptibility (Note 5) TBD Storage Temperature Range −65˚C to +150˚C Lead Temp. (Soldering, 10 seconds) Dual-In-Line Package (Plastic) 260˚C Dual-In-Line Package (Ceramic) 300˚C Surface Mount Package Vapor Phase (60 seconds) 215˚C Infrared (15 seconds) 220˚C Operating Ratings Temperature Range T MIN ≤ TA ≤ TMAX DAC0808 0 ≤TA ≤ +75˚C

Electrical Characteristics

(VCC = 5V, VEE = −15 VDC ,V REF /R14 = 2 mA, and all digital inputs at high logic level unless otherwise noted.) Symbol Parameter Conditions Min Typ Max Units Er Relative Accuracy (Error Relative (Figure 4)% to Full Scale IO ) DAC0808LC (LM1408-8) ±0.19 % Settling Time to Within1⁄2 LSB T A =25˚C (Note 7), 150 ns (Includes tPLH )( Figure 5) tPLH ,tPHL Propagation Delay Time T A = 25˚C, (Figure 5) 30 100 ns TCIO Output Full Scale Current Drift ±20 ppm/˚C MSB Digital Input Logic Levels ( Figure 3) VIH High Level, Logic “1” 2 V DC VIL Low Level, Logic “0” 0.8 V DC MSB Digital Input Current ( Figure 3) High Level V IH = 5V 0 0.040 mA Low Level V IL = 0.8V −0.003 −0.8 mA I15 Reference Input Bias Current ( Figure 3)− 1 − 3 µ A Output Current Range ( Figure 3) VEE = −5V 0 2.0 2.1 mA VEE = −15V, TA = 25˚C 0 2.0 4.2 mA IO Output Current V REF = 2.000V, R14 = 1000Ω , (Figure 3) 1.9 1.99 2.1 mA Output Current, All Bits Low ( Figure 3)0 4 µ A Output Voltage Compliance (Note 3) Er ≤ 0.19%, TA = 25˚C VEE =−5V, IREF =1 mA −0.55, +0.4 V DC VEE Below −10V −5.0, +0.4 V DC SRIREF Reference Current Slew Rate ( Figure 6) 4 8 mA/µs Output Current Power Supply −5V ≤ VEE ≤ −16.5V 0.05 2.7 µA/V Sensitivity Power Supply Current (All Bits ( Figure 3) Low) ICC 2.3 22 mA IEE −4.3 −13 mA Power Supply Voltage Range T A = 25˚C, (Figure 3) VCC 4.5 5.0 5.5 V DC VEE −4.5 −15 −16.5 V DC Power Dissipation DAC0808

the device beyond its specified operating conditions. Note 3:Range control is not required. package, this number increases to 175˚C/W and for the small outline M package this number is 100˚C/W. Note 5:Human body model, 100 pF discharged through a 1.5 kΩ resistor. Note 6:All current switches are tested to guarantee at least 50% of rated current. Note 8:Pin-out numbers for the DAL080X represent the dual-in-line package. The small outline package pinout differs from the dual-in-line package. FIGURE 1. +10V Output Digital to Analog Converter(Note 8)

Typical Performance CharacteristicsVCC = 5V, VEE = −15V, TA = 25˚C, unless otherwise noted (Continued) Unless otherwise specified: R14 = R15 = 1 kΩ , C = 15 pF, pin 16 to VEE ;R L =5 0Ω , pin 4 to ground. Curve A:Large Signal Bandwidth Method ofFigure 7,V REF = 2 Vp-p offset 1V above ground. Curve B:Small Signal Bandwidth Method ofFigure 7,R L = 250Ω ,V REF = 50 mVp-p offset 200 mV above ground. Curve C:Large and Small Signal Bandwidth Method ofFigure 9(no op amp, RL =5 0Ω ), RS =5 0Ω ,VREF =2 V ,VS = 100 mVp-p centered at 0V. Output Current vs Output Voltage (Output Voltage Compliance) DS005687-17 Output Voltage Compliance vs Temperature DS005687-18 Typical Power Supply Current vs Temperature DS005687-19 Typical Power Supply Current vs V EE DS005687-20 Typical Power Supply Current vs V CC DS005687-21 Reference Input Frequency Response DS005687-22 DAC0808

FIGURE 2. Equivalent Circuit of the DAC0808 Series(Note 8)

equal to the peak positive input level at pin 15. diode is recommended between pin 14 and ground. creasing the overall bandwidth. yield a voltage output of 256 levels between 0 and −4.980V. mines the switching time due to increased voltage swing. reference current amplifier. ing a change in the absolute accuracy of output current. Figure 4. The 12-bit con- tors, or stored in a peak detector. accuracy when referred to full-scale. DC reference current is 0.5 to 4 mA.

Physical Dimensionsinches (millimeters) unless otherwise noted Small Outline Package Order Number DAC0808LCM Dual-In-Line Package Order Number DAC0808 DAC0808