D646WP HITEC-RCD | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Ver2.1 ■ This product should not be used directly on the human body for medical purposes. ■ This product should not be used for war weapons. ■ All specifications are subject to change without notice. https://www.hiteccs.com D646WP General Specification. Control System PWM/TTL(Half Duplex) - Position Sensor Type Contact Analog Potentiometer - Motor Type Cored Carbon Brush At the Max voltage, it is recommended to be used only for a short time duration. Operating Voltage Range 3.5 ~ 8.4V Voltage 4.8V 6.0V 7.4V No Load Speed 0.24sec/60˚ 0.19sec/60˚ 0.16sec/60˚ measurement environment Standing Current 30mA 30mA 30mA No Load Running Current 270mA 300mA 330mA Stall Current 1,500mA 1,800mA 2,200mA Deadband 2µs 2µs 2µs Operating Travel Default: ±60º, Programmable: Max 175º / Pulse Width: 900~2100μs(Center:1500μs) - Continuous Rotation n/a - Operating Temperature Range -20˚C ~ +60˚C (-4˚F ~+140˚F) - Storage Temperature Range -30˚C ~ +80˚C (-22˚F ~+176˚F) - Connector Wire Length 300mm (11.811inch) Connector Wire Gauge 22AWG Weight 61.0g (2.152oz) Excluding the weight of Horn Bearing Type 2 Ball Bearing - Case Material Engineering Plastic - Gear Material 1 Metal-Plastic & 3 Metal Gears - Gear Train Backlash Max 0.5˚ - Horn Gear Spline 25T(Ø6) - IP-Rating IP67 - Servo Amplifier Type 32bit programmable Digital - 1:1 scale (Unit : mm[inch])