CHV3241-QDG_15 UMS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 14
Technical content
Ref. : DSCHV3241-QDG9100 -10 Apr 09 1/14 Specifications subject to change without notice United Monolithic Semiconductors S.A.S. Route Départementale 128 - B.P.46 - 91401 Orsay Cedex France Tel. : +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Fully Integrated HBT K-band VCO GaAs Monolithic Microwave IC In QFN package
Description
The CHV3241-QDG is a monolithic multifunction circuit suitable for frequency generation. It integrates an X-band “push-push” oscillator with frequency control (VCO) thanks to base -collector diodes, used as varactors, a K-band buffer amplifier and a divider by 512. All the active devices are internally self-biased. The circuit is fully integrated on InGaP HBT technology: 2µm emitter length, via holes through the substrate and high Q passive elements. The chip is delivered in a standard 24 Leads RoHS compliant QFN4x4 package. Main Features K-band VCO & K-band buffer Prescaler/512 generating 24MHz output suitable for software frequency loop Prescaler and buffer switching capability with low pulling, for optimum efficiency Fully integrated VCO (no external Resonator) Low phase noise High temperature range High output power 4th amplifier bias usable for power setting High frequency stability On chip self biased devices RoHS SMD package: 24L-QFN4x4 Main Characteristics Symbol Parameter Min Typ Max Unit F_out Specified output frequency range 24 24.125 24.25 GHz F_vco Oscillator frequency F_out/2 GHz IF_out Output Intermediate frequency (IF) F_out/1024 GHz P_out Output power at F_out 16 dBm Pres_P Output power at (IF) 0 dBm PN SSB Phase Noise @ F_out @ 100kHz -94 dBc/Hz ESD Protection: Electrostatic discharge sensitive device. Observe handling precautions!
Ref. : DSCHV3241-QDG9100 -10 Apr 09 2/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
Electrical Characteristics
Full temperature and supply voltage range VCO & Amplifier Part Symbol Parameters Min Typ Max Unit F_out Output Frequency range (Operating band) 24 24.25 GHz F_vco VCO frequency F_out/2 V_Tune Voltage Tuning range 1 6 V T_sens Tuning sensitivity 250 400 725 MHz/V F_drift Temperature frequency drift rate 4 MHz/°C H1 Harmonics ½ F_out -50 -40 dBc H3 Harmonics 3/2 F_out -50 -40 dBc H4 Harmonics 2 F_out -30 -20 dBc Pres_Rj F_out prescaler spurious rejection 45 65 dBc PN SSB Phase Noise @ F_out @ 100KHz -94 -80 dBc/Hz VSWR Main Output (F_Out) VSWR 2:1 L_pull RF load pulling into 2:1 VSWR all phases 8 MHz Pull Prescaler and buffer switching pulling 12 MHz Push Bias pushing @ within the V_tune range 250 MHz/V P_out Nominal output Power on F_out port 12 16 19 dBm P_out_V B2_2 Output Power on F_out port @ VB2=2V 9 dBm +I Positive supply current 130 170 mA Prescaler & Buffer Part Symbol Parameters Min Typ Max Unit IF_out IF Output Frequency F_out/1024 GHz Pres_P Output Power on 50 load -3 0 dBm Pres_I Positive supply current 95 145 mA VSWR Prescaler Output (IF) VSWR on 100 2:1 General Symbol Parameters Min Typ Max Unit V Positive supply voltage: VB, V1, VB1, V2, VB2, VD 4.9 5 5.1 V I Total Positive supply current: IB1 + IB2 + I1 + I2 225 315 mA Top Operating temperature range -40 +105 °C All the parameters are specified within F_out specified frequency range. Remark: The minimum and maximum values take into account the spread due to the operating temperature and process spread. These performances have been obtained with the chip in QFN package assembled on the recommended boards (ref. 9 7836) described in this document. These performances are highly dependent on this environment.
Ref. : DSCHV3241-QDG9100 -10 Apr 09 3/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Absolute Maximum Ratings (1) Tamb = +25°C Symbol Parameters Values Unit V_tune Positive Tuning voltage 10 V +V Positive supply voltage 6 V +ID Positive supply current (Prescalar) 170 mA +IB1/+IB2 Positive supply current (amplifiers 2 & 3) 50 / 60 mA +I1/+I2 Positive supply current (VCO+amplifier 1) 40 / 50 mA +IB Positive supply current (prescalar„s buffer) 10 mA Top Operating temperature range (2) -40 to +105 °C Tstg Storage temperature range -55 to +125 °C (1) Operation of this device above anyone of these parameters may cause permanent damage. (2) Temperature of the back side of the QFN package Typical QFN measurements on board 97836 (QFN RF Pin plan) Remark: The temperature mentioned below is taken at the back side of the QFN package. F_out frequency versus V_tune, +V & Top
Ref. : DSCHV3241-QDG9100 -10 Apr 09 4/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 F_out sensitivity versus V_tune & Top @ +V = 5V F_out output power versus V_tune 100 200 300 400 500 600 700 800 900 1000 0,5 1 1,5 2 2,5 3 3,5 4 4,5 5 V_Tune (V) T_sens (MHz/V) T = -40°C T = 25°C T = 105°C
Ref. : DSCHV3241-QDG9100 -10 Apr 09 5/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 IF_out output power versus V_tune on 50 load VCO F_out phase Noise versus V_tune -100 -95 -90 -85 -80 -75 -70 -65 -60 -55 -50 1 2 3 4 5 6V_Tune (V) SSB Phase Noise (dBc/Hz) PN @10KHz offset PN @ 100KHz offset
Ref. : DSCHV3241-QDG9100 -10 Apr 09 6/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Phase Noise versus Offset frequency from carrier @ Top = +25°C Phase Noise versus Offset frequency from carrier & +V @ Vt = 3V, Top = -40°C Tuning Voltage=3V -130 -120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 1000 10000 100000 1000000 Offset Frequency (Hz) SSB Phase Noise (dBc/Hz) Phase Noise -130 -120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 1000 10000 100000 1000000 Offset Frequency (Hz) SSB Phase Noise (dBc/Hz) VA=4,9V & -40°C VA=5V & -40°C VA=5,1V & -40°C
Ref. : DSCHV3241-QDG9100 -10 Apr 09 7/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Phase Noise versus Offset frequency from carrier & +V @ Vt=3V, Top=+105°C 4th stage of the RF amplifier bias VB2 used for power setting Phase Noise -130 -120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 1000 10000 100000 1000000 Offset Frequency (Hz) SSB Phase Noise (dBc/Hz) VA=4,9V & 105°C VA=5V & 105°C VA=5,1V & 105°C
Ref. : DSCHV3241-QDG9100 -10 Apr 09 8/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 4th stage of the RF amplifier bias VB2 used for power setting Prescaler and 12GHz buffer switching effect on VCO frequency (MHz) 0 1 2 3 4 5 6 V_Tune (V) Pres_pull (MHz) T = 25°C T = -40°C T = 105°C
Ref. : DSCHV3241-QDG9100 -10 Apr 09 9/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 QFN Outlines and Pin-out (1) (1) The package outline drawing is given for indication. Refer to the application note AN0017 available at http://www.ums-gaas.com for exact package dimensions.
Ref. : DSCHV3241-QDG9100 -10 Apr 09 10/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 QFN Pin-out description Pin number Pin name Symbol Name Description 15, 17, 25 GND Ground
4 VT V_Tune Frequency Tuning Port
10,11,13, 20, 21, 23 VB, V1, VB1, VB2, V2, VD +V Positive supply voltage
10 VB Positive supply voltage of 12GHz prescaler‟s buffer
11, 21 V1, V2 Positive supply voltage of the VCO core + the 24GHz buffer , 1st stage
13 VB1 Positive supply voltage of the 24GHz buffer, 2nd & 3rd
20 VB2 Positive supply voltage of the 24GHz buffer, 4th
23 VD Positive supply voltage of the Prescaler
16 RF F_out RF output at 24GHz
2 P F_out/1024 Prescaler output at 24MHz
19, 22, 24 Nc Not connected External Components and bias configuration (recommended) Important: A capacitor is required on the prescaler output port as a DC block (C2).
Ref. : DSCHV3241-QDG9100 -10 Apr 09 11/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Recommended Test Fixture (Ref. 97836) for measurements over Temperature Range
Ref. : DSCHV3241-QDG9100 -10 Apr 09 12/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Recommended Test Fixture PCB layout (Ref. 97836)
Ref. : DSCHV3241-QDG9100 -10 Apr 09 13/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Recommended ESD management Norm Value MIL-STD-1686C HBM Class 1 (<1000V) ESD STM5.1-1998 HBM Class 0 (<250V) Refer to the app lication note AN0020 available at http://www.ums-gaas.com for ESD sensitivity and handling recommendations for the UMS package products.
Package Information
Package body material RoHS-compliant Low stress Injection Molded Plastic Lead finish 100% matte Sn MSL Rating MSL1 Recommended surface mount package assembly (UMS AN0017) For volume production the SMD type package can be treated as a standard surface mount component (please refer to the IPC/JEDEC J -STD-020C standard or equivale nt). The assembly on the motherboard can be performed using a standard assembly process (e.g. stencil solder printing, standard pick -and-place machinery, and solder reflow oven). However, caution should be taken to perform a good and reliable contact over the whole pad area. Recommendation: The solder thickness after reflow should be typical 50µm [2 mils] and the lateral alignment between the package and the motherboard should be within 50µm [2 mils]. It is important for the performance of the product that the whole overlapping area between the motherboard and package pads is connected. Voids or other improper connections, in particular, between the ground pads on motherboard and package will lead to a deterioration of the RF performance and the heat di ssipation. The latter effect can reduce drastically reliability and lifetime of the product. MAXIMUM RECOMMENDED REFLOW PROFILE for LEADFREE SMT ASSEMBLY PRODUCTS 100 120 140 160 180 200 220 240 260 280 300 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 Time (s) Temperature (°C) 150 217 255 Maximum Ramp up rate : 3°C / second 30s Max
Ref. : DSCHV3241-QDG9100 -10 Apr 09 14/14 Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09 Recommended environmental management Refer to the application note AN0019 available at http://www.ums-gaas.com for environmental data on UMS package products.
Ordering Information
24L-QFN4x4 Lead Free Package: CHV3241-QDG/XY Stick: XY=20 Tape and reel: XY=21 Information furnished is believed to be accurate and reliable. However United Monolithic Semiconductors S.A.S. assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of United Monolithic Semiconductors S.A.S. . Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. United Monolithic Semiconductors S.A.S. products are not authorised for use as critical components in life support devices or systems without express written approval from United Monolithic Semiconductors S.A.S.