BL8070CA5TR BELLING | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

www.belling.com.cn 1 6V High Speed INVERTER BL8070

DESCRIPTION

BL8070 is CMOS single inverter gate. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 6.0V VCC range. Inputs tolerate voltage up to 6V independent of VCC operating voltage. FUNCTION DIAGRAM

FEATURES

 Space saving 5-lead surface mount SC70 Package and 1x1mm DFN package  Ultra High Speed; TPD 8.5 ns Typ into 50 pF at 5V VCC  High Output Drive; ±16 mA at 5V VCC  Broad VCC Operating Range; 1.65V to 6.0V  Low Power Consumption, 1μA Max ICC  Schmitt Trigger Action at input makes the circuit tolerant for slower input rise and fall time

APPLICATIONS

 Cell phone and other portable device  3G module ORDERING INFORMATION / PIN CONFIGURATION / MARKING Ordering Part No. Package Pin Out Marking BL8070CA5TR SC70-5 OCYW BL8070CKDTR DFN1x1-5L 5. Vcc 4. NC 1 Y

2 Gnd

4 Vcc

YW：Date Code

www.belling.com.cn 2 BL8070 ABSOLUTE MAXIMUM RATING Parameter Symbol Limit Unit Supply voltage range VCC -0.5~7 V Input voltage range VIN Output voltage range VOUT DC Input Diode Current IIK ±20 mA DC Output Diode Current IOK DC Output Current IOL/IOH ±25 Storage Temperature Range Tstg -40 to 150 C Package Power Dissipation @ +70° C Pd 200 mW THERMAL RESISTANCE RATING Parameter Device Symbol Limit Unit Package thermal impedance SOT23-5-1.7 θJA 252 C /W SO23-5-1.3 206 SC70-5 142 RECOMMENDED OPERATING CONDITION Tj=25C Parameter Symbol Min. Max. Unit Supply voltage VCC 1.65 6 V Input voltage VIN 0 VCC Output voltage VOUT 0 VCC High-level input voltage VCC = 2 V VIH 1.3 VCC = 3 V 1.8 VCC = 6 V 3.2 Low-level input voltage VCC = 2 V VIL 0.7 VCC = 3 V 1.0 VCC = 6 V 2.2 High-level output current VCC = 2 V IOH -50 μ A VCC = 3.3±0.3 V -8 mA VCC = 6±0.5 V -16 Low-level output current VCC = 2 V IOL 50 μ A VCC = 3.3±0.3 V 8 mA VCC = 6±0.5 V 16 Input transition rise or fall rate VCC = 3.3±0.3 V Δt/Δv 100 ns/V VCC = 6±0.5 V 20 Operation Temperature TA -40 to 85 C

www.belling.com.cn 3 BL8070 ELECTRICAL CHARACTERISTICS (unless otherwise noted) Parameter Test condition Vcc Min. Max. Unit II VI = 6.0 V or GND 0 V to 6.0 V ±1 μ A ICC VI = VCC or GND, IO = 0 6.0V 1 μ A Ci VI = VCC or GND 5.0V 10 pF VOH IOH = −50μ A 2.0V 1.9 V VOL IOH = −50μ A 2.0V 0.1 3.0V 0.1 5.0V 0.1 IOH = −8 mA 3.0V 0.4 IOH = −16 mA 5.0V 0.5 SWITCHING CHARACTERISTICS(VCC = 3.3 V ± 0.3 V) Parameter Input Output Load capacitance Min. Max. Unit tPLH A Y CL = 15 pF 1 8.5 ns tPHL 1 8.5 tPLH A Y CL = 50pF 1 12 tPHL 1 12 SWITCHING CHARACTERISTICS(VCC = 6.0 V ± 0.5 V) Parameter Input Output Load capacitance Min. Max. Unit tPLH A Y CL = 15 pF 1 6.5 ns tPHL 1 6.5 tPLH A Y CL = 50pF 1 8.5 tPHL 1 8.5 OPERATING CHARACTERISTICS, VCC = 5 V, TA = 25C Symbol Parameter Test condition TYP. Unit Cpd Power dissipation capacitance No load, f = 1 MHz 12 pF

www.belling.com.cn 4 BL8070 PARAMETER MEASUREMENT INFORMATION VCC Input Output CL Note: A. The outputs are measured one at a time, with one input transition per measurement. B. All parameters and waveforms are not applicable to all devices. C. CL includes probe and jig capacitance D. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns.

www.belling.com.cn 5 BL8070 PACKAGE OUTLINE Package specification： Package specification：

www.belling.com.cn 6 BL8070 Package specification：