DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

BL6562 SHANGHAI BELLING CO.,LTD. ACTIVE PFC CONTROLER Zip code: 200233 Phone: 86-021-64850700 Fax: 86-021-64854424 - 1 - BL6562 ACTIVE PFC CONTROLER

1 Features

 Transition-mode control  Low start -up current (<70 uA )  Ultra -low quiescent current ≤2mA  Ultra -low operating current ≤2.2 mA  Large IC supply voltage operating range  Supply current ≤1mA after disable  1%(@Tj=25 C) internal reference voltage  System operation protection : Dynamic and static over voltage protection Under-voltage lockout function Figure1 PACKAGES P eak current limited S upply voltage upper clamped O utput voltage upper clamped  -400mA/+600mA totem pole output driver with UVLO pull -down

Applications

 LED Light Driver  Electronic Ballast  AC/DC Adapter

2 General descriptions

BL6562 is an active power factor correct controller operating in transition mode, which is mainly used in small power electronic ballast, LED light driver and AC/DC adapter. Realised in advanced BCD technology , BL6562 features ultra-low start-up current and operating current (≤2.2mA @12V). Remote IC DISALBE function can make it work at power saving mode. BL6562 includes an internal highly linear multiplier, able to provide a high power factor in wide-range-mains operation and over a large range load change. The max current of the MOSFET is limited to the upper clamp output voltage of the multiplier. Dynamic and static over -voltage protection, internal supply voltage upper clamp、under voltage lockout and output upper clamp functions can make the system work safely. -400mA/+600mA totem pole output driver is capable of driving large power MOSFET and IGBT. Figure 2 Pin connection Vcc 8 GD 7 GND 6 ZCD 5 BL6562

1 INV

2 COMP

3 MULT

8 LEAD SOP or DIP

BL6562 SHANGHAI BELLING CO.,LTD. ACTIVE PFC CONTROLER Zip code: 200233 Phone: 86-021-64850700 Fax: 86-021-64854424 - 2 - Table 1 Pin description Pin Symbol Function description 1 INV Inverting input of the error amplifier. 2 COMP Output of the error amplifier and one input of the multiplier. 3 MULT One input of the multiplier. 4 CS One input of Current sense comparator. An internal low pass filter is placed to reduce high frequency interface. 5 ZCD Zero current detection input and disable function pin. When the voltage is smaller than 130mV, the device is disabled. 6 GND Ground. 7 GD Gate driver output. The typical upper output clamp voltage is 12V. 8 Vcc Supply input. Supply voltage of UVLO block, voltage regulator and output driver. The upper limit is extended to 24V min. Figure 3 Block diagram 1.7V 40K 1.7V 25V VREF1 UVLO Starter EA Multiplier Overvoltage detector R S Q Disable Negative edge detector 2.1V 1.4V Gate driver13V VCC Internal supply 7V,5V 2.5V VCC INV COMP MULT CS ZCD GND GD 2 3 4 Voltage regulator 7pF

BL6562 SHANGHAI BELLING CO.,LTD. ACTIVE PFC CONTROLER Zip code: 200233 Phone: 86-021-64850700 Fax: 86-021-64854424 - 3 - Table 2 Absolute maximum ratings Parameter symbol Value Unit Supply voltage VCC 24.5 V inputs and outputs voltages(Pin1~4) -0.3~8 V Zero current detector current IZCD +/-10 mA Gate driver output voltage VGD -0.3~self-limited Power dissipation@50 C(DIP-8) Ptotal 1 W Power dissipation@50 C(SO-8) Ptotal 0.65 W Junction temperature operating range Tj -40~150 C Storage temperature Tstg -55~150 C ESD(HBM) voltage VESD >4000 V Latch up current ILatchup >200 mA Table3 Electrical characteristics （T=25 C，Vcc=12V，CO=1nF；unless otherwise specifed） symbol parameter Test condition min typ max unit Supply block Vcc-on Turn-on threshold 11 12 13 V Vcc-off Turn-off threshold 9 9.5 10.2 V Vcc Operating rang After turn-on 10.3 24 V Vcc,clamp Upper clamp voltage ICC=20mA 24.5 25.8 28 V VR25 2.5V reference voltage T=25 C 2.475 2.5 2.525 V 10.3V<VCC<24 2.45 2.55 Supply current Ist Start-up current VCC=11V before turn on 40 70 uA Iq Quiescent current 1.3 2 mA Icc Operating current @70kHz 1.5 2.2 mA Iqsdis Quiescent current when DISABLE Vzcd=120mV 0.67 1 mA Iqsovp Quiescent current when OVP OVP 1.3 2 mA Multiplier block Imul Input bias current Vmult= 4V -1 uA Lmul Linear operating range 0~3 V kmax Max slope Vmult=0~0.5V, Vcomp=5.2V 1.6 1.9 V/V K Gain(1) Vmult=1V,Vcomp=4V 0.5 0.6 0.7 1/V Vmultoffset Multiplier offset Vmult=0V 27 mV Vmult=2.5V 5 mV Vmultclamp Output clamp voltage Vcomp=5.2V 1.6 1.7 1.8 V

BL6562 SHANGHAI BELLING CO.,LTD. ACTIVE PFC CONTROLER Zip code: 200233 Phone: 86-021-64850700 Fax: 86-021-64854424 - 4 - Table 3 Electrical characteristics (continued) （T=25 C，Vcc=12V，CO=1nF；unless otherwise specified） Error amplifier block Iinv Input bias current Vinv= 3V -1 uA Av Open loop voltage gain 60 80 dB GBW Gain Bandwidth 1 MHz Icomp Source current Vcomp=4V, Vinv=2.4V -2 -3.5 -5 mA Sink current Vcomp=4V, Vinv=2.6V 4 6 mA Vcomp upper clamp voltage Isource=-0.5mA 5.2 5.35 5.8 V Lower clamp voltage Isink=0.5mA 0.8 1 1.2 V Over voltage protector Iovp Dynamic OVP threshold current 24 39 45 uA Hys (2) 20 uA Vovp Static OVP threshold voltage (2) 1.6 1.7 1.8 V Current sense block Ics Input bias current Vcs=0 -1 uA td(H-L) Delay to output 250 350 ns Zero current detector block Vzcd(H) Upper clamp voltage Izcd=2.5mA 5 5.8 6.5 V Vzcd(L) Lower clamp voltage Izcd=-2.5mA 0.3 0.55 0.8 V Izcdb Input bias current Vzcd=1 to 4.5V 2 uA VZCDA Positive triggering voltage (2) 2.1 V VZCDT Negative triggering voltage (2) 1.4 V Izcdsor Source current capability -2.5 -5.5 mA Izcdsink Sink current capability 2.5 mA Vzcddis Disable threshold 130 160 190 mV Vzcden Enable threshold 250 280 310 mV Izcdres Restart current 40 80 uA Starter block fstart Starter frequency 5 9 16 KHz Output gate driver block Voh Output voltage IGDsource=20mA 9.8 10.3 V IGDsource=200mA 8 8.3 V Vol IGDsink=200mA 1 1.9 V tf Fall time 32 70 ns tr Rise time 45 85 ns Voclamp Output clamp voltage Vcc=20V, IGDsource=5mA 11 12 13 V Vo-uvlo Output voltage before turn on Vcc=0~VCCon, IGDsink=10mA 1 V (1) K= VCS/ [Vmult*(Vcomp-2.5)] (2)Parameters guaranteed by design.

BL6562 SHANGHAI BELLING CO.,LTD. ACTIVE PFC CONTROLER Zip code: 200233 Phone: 86-021-64850700 Fax: 86-021-64854424 - 5 -

3 Application information

Figure 4 Wide-range mains demo board BL6562-80W: schematic Figure 5 Wide-range mains demo board BL6562-80W: PCB layout Table 4 BL6562-80W test results Vin (VAC) Pin (W) Vo (VDC) ∆Vo(Vpp) Po (W) η (%) PF THD(%)

BL6562 SHANGHAI BELLING CO.,LTD. ACTIVE PFC CONTROLER Zip code: 200233 Phone: 86-021-64850700 Fax: 86-021-64854424 - 6 -

4 Package information

Figure 6 DIP8 package dimensions Figure 7 SOP8 package dimensions Notice： Sample tested during initial release and after any redesign or process change that may affect parameter. Specification subject to change without notice. Please ask for the newest product specification at any moment.