BL55024 BELLING | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Shanghai Belling Corp., Ltd BL55024 zip: 200233 Tel: 86-021-64850700 Fax: 86-021-64855865 LCD Driver for 60 Display Units BL55024
1 General Description
The BL55024 is a general LCD driver IC for 60 units LCD panel. It features a wide operating supply voltage range, incorporates simple communication interface with microcomputer and is suitable for multiple application.
2 Features
/circle6 Advanced low power CMOS Technology /circle6 Selection of 1/2 or 1/3 bias, selection of 1/2 or 1/3 or 1/4 duty. /circle6 Operation voltage: 2.5~5.5V /circle6 Serial data interface /circle6 60(15x4) Display Units /circle6 Low power dissipation design: Power saving mode: Idd=14uA at 5V and Idd=9uA at 3.3V; /circle6 On-chip RC oscillator /circle6 VLCD for adjusting LCD operating voltage /circle6 Excellent EMC immunity /circle6 Compatible with general microcomputer /circle6 SOP24 package
3 Pin Assignment
4 Pin Description
Pin No. Pin name Function
1 SDA Serial data input/output
2 SCI Serial clock input
3 Vdd Supply voltage
4 Vss ground
5 Vlcd LCD supply voltage
6-9 Com0 、Com2 、Com1 、Com3 Common terminal driving output 10-24 S0 ——S14 Segment terminal driving output Tab.1
Shanghai Belling Corp., Ltd BL55024 zip: 200233 Tel: 86-021-64850700 Fax: 86-021-64855865
5 Function Description
1.function circuit The BL550024 has all function circuits that can directly drive any static or multiplexed LCD containing up to four commons and up to 15 segments. The function circuits include:Power-on reset, LCD bias generator, LCD voltage selector, Oscillator, display RAM, Timing, Display latch, Shift register, Common/segment outputs, input/output bank selector, Blinker, Data pointer, etc. 2.display function decription The display RAM is a static 15x 4-bit RAM which stores LCD data. A logic 1 in the RAM bit-map indicates the on state of the corresponding LCD segment; similarly, a logic 0 indicates the off state. There is a one-to-one correspondence between the RAM addresses and the segment outputs, and between the individual bits of a RAM word and the common outputs. (see Fig.2). Display RAM address and SEGMENT （（ （（S0~S14 ）） ））output 0 1 2 3 。 。 。 。 11 12 13 14 COM (Com0~ Com3) 输出 Fig2 When display data is transmitted to the BL55024, the display bytes received are stored in the display RAM in accordance with the selected LCD drive mode. To illustrate the filling order, an example of a 7-segment numeric display showing all drive modes is given in Fig.3; the RAM filling organization depicted applies equally to other LCD types. Fig 3
Shanghai Belling Corp., Ltd BL55024 zip: 200233 Tel: 86-021-64850700 Fax: 86-021-64855865 3. I2C-bus protocol I2C-bus slave addresses (0111110) are reserved for the BL55024 The I2C-bus protocol is shown in Fig.4. The sequence is initiated with a START condition (S) from the I2C-bus master which is followed by the BL55024 slave addresses available. After acknowledgement, one or more command bytes (m) follow which define the status of the addressed BL55024. The last command byte is tagged with a cleared most significant bit, the continuation bit C. The command bytes are also acknowledged by the addressed BL55024 on the bus. After the last command byte, a series of display data bytes(n) may follow. These display bytes are stored in the display RAM at the address specified by the data pointer. Data pointer are automatically updated and the data is directed to the intended BL55024 device. After the last display byte, the I2C-bus master issues a STOP condition (P). Fig 4 4. command decoder The command decoder identifies command bytes that arrive on the I 2C-bus. All available commands carry a continuation bit C in their most significant bit position. The four commands available to the BL55024 are defined in Fig 5.
Shanghai Belling Corp., Ltd BL55024 zip: 200233 Tel: 86-021-64850700 Fax: 86-021-64855865 Fig 5
6 Absolute Maximum Rating
Parameter Symbol Rating Unit Supply voltage Vdd -0.5 ～+6.0 V LCD operating voltage Vlcd 0～ Vdd V Input voltage Vi Vss-0.5 ～Vdd+0.5 V Output voltage V o Vlcd-0.5 ～Vdd+0.5 V Vdd,Vss,Vlcd current Idd,Iss,Ilcd -50 ～+50 mA Maximum power consumption Ptot 400 mW Operating temperature Topr -40 ～ +75 oC Storage temperature Tstg -65 ～ +150 oC
7 DC Characteristic
Symbol Parameter Test Condition Min Typ Max Unit Vdd IC Operating voltage 2.5 - 5.5 V Vlcd LCD operating voltage 0 - Vdd-2 V Idd1 Supply current Vdd=5V,VLCD=0V,Normal mode,internal oscillator - 25 50 uA Idd2 Supply current Vdd=5V,VLCD=0V,power saving mode,internal oscillator - 14 30 uA Idd3 Supply current Vdd=3.3V,VLCD=0V,Normal mode,internal oscillator - 16 30 uA Idd4 Supply current Vdd=3.3V,VLCD=0V,power saving mode,internal oscillator - 9 15 uA ViL Low voltage input SDA,SCL Vss - 0.3Vdd V ViH High voltage input SDA,SCL 0.7Vdd - 6.0 V
Shanghai Belling Corp., Ltd BL55024 zip: 200233 Tel: 86-021-64850700 Fax: 86-021-64855865
8 AC Characteristic Ta=25 oC
Symbol Parameter Test Condition Min Typ Max Unit Fclk Oscillator frequency Vdd=5V ,normal mode 125 180 300 KHz Fclk Oscillator frequency Vdd=3.3V , power saving mode 21 31 48 KHz Tclk Half oscillator cycle 1 - 3 uA Tsh1 CS start hold time 5 - us Tsh2 SCL start hold time 5 - us tlow High time 5 - us thig Low time 4 - us thd SCL hold time 250 ns Fig 6
9 Typical Application Circuit
No te: 1/ when I 2 C are idle mode,SDA and SCL must be connect to high level(by pull up resistor),otherwise the device maybe can not go into power saving mode. 2/ In power-saving mode, SCL frequency must be less than 21KHz. 3/ Work at 1/3 bias, Vdd – Vlcd must be more than 2.9V 。。 。。 Fig 7
Shanghai Belling Corp., Ltd BL55024 zip: 200233 Tel: 86-021-64850700 Fax: 86-021-64855865 Unit: inches (mm) Fig 8