AMW036 SILABS | Alldatasheet
Document overview
- Manufacturer or author: Neale
- PDF pages: 28
Technical content
Datasheet sections
- 1 General Description
- 2 Block Diagram
- 3 Electrical Specifications
- 3.1 Absolute Maximum Ratings
- 3.2 Recommended Operating Conditions
- 3.2.1 DC Operating Conditions
- 3.2.2 Environmental Conditions
- 3.3 Power Consumption
- 4 WLAN RF Specifications
- 4.1 Summary WLAN Specifications
- 4.2 WLAN Receiver Specifications
- 4.3 WLAN Transmitter Specifications
- 5 Pinout and Signal Descriptions
- 5.1 Pinout
- 5.2 Pin Description
- 6 Design Guidelines
- 6.1 Dimensions
- 6.2 Recommended PCB Footprint
- 6.3 Routing Recommendations
- 6.4 Soldering Information
- 6.5 Module Photograph
- 6.6 Application Examples
- 6.6.1 Operation using ZentriOS Serial
- 7 Regulatory Certification
- 7.1 United States
- 7.1.1 Labeling and User Information
- 7.1.2 RF Exposure
- 7.1.3 Further Information
- 7.2 Canada
- 7.2.1 Labeling and User Information
- 7.2.2 RF Exposure
- 7.2.3 Further Information
- 7.3 Europe
- 7.3.1 Labeling and User Information
- 7.3.2 Further Information
- 7.4 Australia
- 7.4.1 Further Information
- 7.5 New Zealand
- 7.5.1 Further Information
- 7.6 Japan
- 8 Packaging, Handling and Storage, RoHS
- 8.1 Packaging
- 8.2 Handling & Storage
- 8.3 RoHS Directive
- 8.4 Tape and Reel Specifications
- 9 Ordering Information
- 9.1 Ordering an Unspecified ZentriOS
- 9.2 Ordering a Specific ZentriOS Version or a
- 9.3 ZentriOS Version History
- 10 Revision History & Glossary
- 10.1 Revision History
- 10.2 Glossary
- 11 References
Not Recommended for New Designs
ADS-MWx36-102R • AMWx36 Datasheet Page | ii © 2014-2019 Zentri http://www.zentri.com June 26, 2019 Disclaimer While the information provided in this document is believed to be accurate, it is under development and Zentri reserves the right to make changes without further notice to the product described herein to improve reliability, function, or design, and makes no guarantee or warranty concerning the accuracy of said information, nor shall it be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon, such information. Zentri makes no warranties of any kind, whether express, implied or arising by custom or course of trade or performance, and specifically disclaims the implied warranties of title, non-infringement, merchantability, or fitness for a particular purpose. No part of this document may be copied, reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photographic, or otherwise, or used as the basis for manufacture or sale of any items without the prior written consent of Zentri. Trademarks Zentri and the Zentri logo are trademarks of Zentri. Other trademarks in this document belong to their respective owners. © 2014-2019 Zentri. All rights reserved. Document Number: ADS-MWx36-102R Release Date: June 26, 2019 Contact https://www.silabs.com/about-us/contact-us About this User Guide This document provides information on the AMWx36 802.11b/g/n Wi-Fi networking module from Zentri. Modules covered by this datasheet include: AMWx36 Rev 2 Further information about ZentriOS is available from: http://docs.zentri.com Organization This document is organized into the following sections: Not Recommended for New Designs
ADS-MWx36-102R • AMWx36 Datasheet Page | iii © 2014-2019 Zentri http://www.zentri.com June 26, 2019 General Features Self-contained ultra-low power Wi-Fi module with microcontroller and support for ZentriOS- W firmware (AMW036/AMW136) and ZentriOS-WZ firmware (AMW136), including industry standard SSL/TLS secure TCP/IP network stack. Integrated SPI-serial flash for software upgrades and user accessible read/write file system Wi-Fi Cypress single band 2.4GHz IEEE 802.11b/g/n 1x1 Wi-Fi transceiver Includes support for all Wi-Fi security modes including Open, WEP, WPA, and WPA2-PSK Microprocessor ARM Cortex® M4 based microprocessor AMW036: operates up to 84MHz core frequency AMW136: operates up to 100MHz core frequency RAM AMW036: 96 KB AMW136: 128 KB Interfaces* UART: 2 x 4-wire up to 10.5Mbit/s SPI : SPI-Master (42Mbit/s), SPI-Slave (21Mbit/s) GPIO: Up to 21 GPIOs (overlaid with peripherals) A/D converter : 9 channel input, 12-bit resolution, 2.4MSPS sampling in single-shot or scan mode PWM: Up to 14 PWM outputs Wake-up: Wake pin for ultra-low power operation Built in PCB trace antenna *Some interfaces share module pins Operational & Radio Single operating voltage : 3.3V (typical) All I/O pins are +5V tolerant Operational Temperature Range: -30°C to +85°C Weight : 0.07 oz (2g) Current consumption @ 3.3V, 25°C - VBAT : 0.97µA (with 32k RTC) - Standby : 2.8µA (3.8uA with 32k RTC) - Stop : 10µA with RAM retention (113µs wake) - Wi-Fi Powersave : 0.77mA (DTIM = 3) - Active receive : 5.7mA @ 1Mbit/s UDP Active transmit : 11.4mA @ 1Mbit/s UDP Maximum RF transmit power - 802.11b/g : +18 dBm - 802.11n : +14 dBm Minimum Receive sensitivity - 802.11b/g : -94 dBm - 802.11n : -86 dBm Sustained TCP throughput : 10 Mbit/s
Applications
Industrial, M2M and Home Automation - Environmental monitoring - Energy monitoring - Wireless sensing, remote data logging - HVAC, power, light, & thermostat control - Appliance control Security - Cameras, Doors/Window monitoring - Alarms, Smoke Detectors - Door and entry control Health & Fitness - Fitness Equipment - Home health monitoring e.g. weight scales Consumer - Audio, Toys, Robots Not Recommended for New Designs
ADS-MWx36-102R • AMWx36 Datasheet Page | iv © 2014-2019 Zentri http://www.zentri.com June 26, 2019 ZentriOS-W/ZentriOS-WZ Firmware Features The ZentriOS-W/ZentriOS-WZ firmware supplied with the AMWx36 provides a wide range of features beyond the underlying hardware, and supports application development via its command API. For complete documentation of ZentriOS-W, see: https://docs.zentri.com/zentrios/w/latest/ The AMW136 supports ZentriOS-WZ firmware, which adds support for developing ZentriOS apps (ZAPs). For complete documentation of ZentriOS-WZ, see: https://docs.zentri.com/zentrios/wz/latest/ Software APIs ZentriOS-W command API ZentriOS-WZ command API ZentriOS-WZ SDK and native API Interfaces Serial (UART, remote terminal) SoftAP and WLAN client (concurrent) I2C master SPI master Servers TCP/TLS, UDP, HTTP(S), DHCP, DNS HTTP(S) Server with RESTful API and Websockets Fully customizable mobile responsive Web application with JavaScript and Python libraries Clients TCP/TLS, UDP, NTP, Secure-SMTP, DHCP, DNS HTTP(S) client Websocket client Setup Multiple Wi-Fi setup options, including via serial command and Web setup with SoftAP Peripherals and Sensors GPIOs for control, indication and monitoring I2C-master API for interfacing to external peripherals SPI-master API for interfacing to external peripherals Automated broadcast and streaming of sensor data Local caching of sensor data Update and Recovery Wireless OTA (Over-the-Air) update to remote manage firmware using the Zentri DMS (Device Management Service) System Management System configuration and monitoring via setting and getting a wide range of variables Configurable power states Sleep/wake timers File System Read/write file system with appendable log files Storage of large files Optional additional bulk serial flash HTTP download to file system, HTTP upload from file system Not Recommended for New Designs
ADS-MWx36-102R • AMWx36 Datasheet Page |1 © 2014-2019 Zentri http://www.zentri.com June 26, 2019
1 General Description
The AMW036 and AMW136 modules from Zentri combine a microcontroller with a CYW43362 Wi-Fi device to provide an advanced stand-alone Wi-Fi and networking solution. The term AMWx36 refers to either module. An integrated module avoids difficult RF layout and enables designers to rapidly embed Wi- Fi and secure networking functionality into virtually any device. The ZentriOS serial- to-Wi-Fi application, pre- programmed into all modules, may be used to fast- track module integration into end-products. With dimensions of just 20.3mm x 22.9mm and a wide temperature range, the module is suitable for integration into most embedded applications. The Wi-Fi device from Cypress Semiconductor Corporation includes an integrated RF transmit power amplifier and provides superior Wi-Fi performance and full compatibility with all 2.4GHz 802.11b/g/n Wi- Fi networks. A single PCB antenna is provided to simplify the RF design requirements. The microprocessor is based on a high-performance ARM® 32-bit Cortex™-M4. The AMW036/AMW136 microcontroller core operates at a frequency up to 84/100MHz providing up to 125 DMIPS or 1.25 DMIPS/MHz (Dhrystone 2.1). The AMW036 has 96KB of RAM. The AMW136 has 128KB of RAM. The AMWx36 module offers extensive I/O and peripheral interfaces listed below, and provides additional interface combinations by leveraging multiplexing and alternate function capabilities. 2 x 4-Wire UART interfaces 2 x SPI interfaces (1 master, 1 slave) 21 x GPIOs 9 x 12-bit A/D converters 14 x PWM outputs 1 x ultra-low power wake input The module is powered by a 3.3V power supply, a separate WLAN power supply pin is provided to minimize noise coupling into the WLAN subsystem. Various powersave modes offer ultra-low power operation. Wake from low power sleep mode is possible using IO pins or the internal real-time clock, and wake from ultra-low power standby mode is achieved using the dedicated wake pin. The module incorporates a 32.768kHz crystal to maintain an accurate real time clock. A 32kHz clock output is available on a dedicated module pin in both active power save modes. The 32kHz clock output may be used to drive the clock input of other system devices. This avoids the need for an additional crystal thereby minimizing total system cost. The module has numerous modular approvals. See Section 7, Regulatory Certification. Not Recommended for New Designs
2 Block Diagram
the Zentri secure over the air (OTA) update process. Figure 1. AMW036 / AMW136 Architecture
1 MByte
3 Electrical Specifications
3.1 Absolute Maximum Ratings
The values in Table 1 reflect absolute maximum ratings from the respective microprocessor and CYW43362 datasheets. Table 1. Absolute Maximum Voltage Ratings Table 2. Absolute Maximum Environmental Ratings
3.2 Recommended Operating Conditions
limits for extended periods can adversely affect long-term reliability of the device.
3.2.1 DC Operating Conditions
Table 3. Recommended DC Operating Conditions
- VDD_3V3 and VDD_WIFI must be at the same voltage when using the Wi-Fi subsystem
- The performance of the Wi-Fi subsystem is degraded significantly at low voltages
3.2.2 Environmental Conditions
Table 4. Recommended Environmental Conditions
3.3 Power Consumption
Table 5. Power consumption (VDD_3V3, VDD_WIFI, VBAT @ 3.3V)
- Total combined current consumed by all power supplies: VBAT, VDD_3V3, VDD_WIFI.
- 802.11 beacon Interval = 102.4ms, DTIM=3, Beacon Duration = 1ms @ 1Mbps.
- MCU Stop Mode with 113µs wakeup latency (flash in deep power down mode), VDD_WIFI = 0V
- Average current receiving 1Mbit/s UDP at 802.11n MCS7
- Average current transmitting 1Mbit/s UDP at 802.11n MCS7
- Wi-Fi Transmitting at +18dBm CCK 11Mbit/s with maximum duty cycle
- Hardware capability; minimum power consumption is dependent on ZentriOS version and external components
Table 6. 32kHz Crystal Specifications1
- Reproduced from manufacturer’s datasheet.
4 WLAN RF Specifications
The AMWx36 WLAN radio specifications are derived from the Cypress CYW43362 WLAN radio specifications. All specifications are measured by disconnecting the PCB antenna and connecting directly to the RF trace.
4.1 Summary WLAN Specifications
Table 7. Summary WLAN Specifications
4.2 WLAN Receiver Specifications
Table 8. WLAN Receiver Performance Specifications
1 Mbps DSSS – -94 -91
11 Mbps CCK – -87 -83
6 Mbps OFDM – -86 -81
65 Mbps MCS0, HT20 – -86 -81
- Operation below -20°C and above +65°C with parameter derating per Note 2
- Derate receive sensitivity by 1.5dB for operation between temperatures of -30°C to -20°C and 65°C to 85°C
4.3 WLAN Transmitter Specifications
Table 9. WLAN Transmitter Performance Specifications
1 Mbps DSSS -11 dB +14 +16 +18
11 Mbps CCK -11 dB +14 +16 +18
6 Mbps OFDM -22 dB +12 +14 +16
54 Mbps OFDM -25 dB +12 +14 +16
- Operation below -20°C and above +65°C with parameter derating per Note 2
- Derate transmit power by 1.5dB for operation between temperatures of -30°C to -20°C and 65°C to 85°C
5 Pinout and Signal Descriptions
5.1 Pinout
A top view of the AMWx36 pinout is depicted in Figure 2. recommended footprint is provided in Section 6.2. Figure 2. AMWx36 Pinout (TOP View – Pins NOT visible from top!)
5.2 Pin Description
Table 10. AMWx36 ZentriOS Pin Definitions
3 VBAT S VBAT MCU supply -
4 GPIO_0 I/O Factory Reset2 SPI1_MISO (S), GPIO
5 GPIO_1 I/O GPIO -
Pinout and Signal Descriptions ADS-MWx36-102R • AMWx36 Datasheet Page |8 © 2014-2019 Zentri http://www.zentri.com June 26, 2019 Pin Name Type1 Primary Function Alternate & Other Function(s)
6 GPIO_2 I/O GPIO SPI1_SCK (S)
7 GPIO_3 I/O GPIO SPI1_CS (S)
8 GPIO_4 I/O GPIO -
9 OSC_32K_OUT O OSC_32K_OUT -
10 VDD_3V3 I/O 3.3V MCU supply 11-12 GND S Ground -
13 GPIO_5 I/O GPIO SPI1_MOSI (slave), PWM5
14 GPIO_6 I/O SPI0_MISO (M) 4 ADC6 (when SPI not in use). Not available for digital I/O. 15 GPIO_7 I/O SPI0_SCK (M) 4 ADC5 (when SPI not in use). Not available for digital I/O. 16 GPIO_8 I/O SPI0_MOSI (M) 4 ADC7 (when SPI not in use). Not available for digital I/O.
17 GPIO_9 I/O GPIO UART0_RTS
18 GPIO_10 I/O GPIO UART0_CTS, PWM0
19 GPIO_11 I/O UART0_RX GPIO, PWM0
20 GPIO_12 I/O UART0_TX GPIO, PWM0
21 GPIO_13 I/O GPIO PWM1
22 GPIO_14 I/O GPIO PWM3, I2C_SCL
23 GPIO_15 I/O GPIO PWM3, I2C_SDA
24 GPIO_16 I/O GPIO PWM6
25 GPIO_17 I/O GPIO UART1_RX, ADC3, PWM4
28 GPIO_18 I/O GPIO -
29 GPIO_19 I/O GPIO UART1_TX, ADC2, PWM4
30 GPIO_20 I/O GPIO ADC9, PWM2
31 GPIO_21 I/O GPIO ADC8, PWM2
32 GPIO_22 I/O GPIO UART1_CTS, WAKE, ADC0, PWM1
33 GPIO_23 I/O GPIO UART1_RTS, ADC1, PWM4
34 RESET_N I System Reset3
35 VDD_WIFI S 3.3V WLAN supply - 36-52 GND S Ground - Not Recommended for New Designs
ADS-MWx36-102R • AMWx36 Datasheet Page |9 © 2014-2019 Zentri http://www.zentri.com June 26, 2019 Notes: 1. I = Input, O = Output, S = Supply 2. Factory reset is sampled at power-on-reset and available for other purposes thereafter. 3. The module Reset pin is connected to the internal MCU via a 1k resistor. We recommend driving the pin. If the pin is not driven, connect a 0.1uF capacitor to ground close to the pin to bypass noise which may cause unintended reset. 4. Connected to SPI serial flash inside the module.
6 Design Guidelines
6.1 Dimensions
Figure 3 - AMWx36 Numbat Dimensions Table 11 - AMWx36 Numbat Dimensions Symbol Imperial (thou) Tolerance (thou) Metric (mm) Tolerance (mm) A 134 ±6 3.40 ±0.15 A1 30 ±3 0.76 ±0.08 A2 104 ±6 2.64 ±0.15 D 900 ±5 22.86 ±0.13 D1 600 ±5 15.24 ±0.13 D2 300 ±5 7.62 ±0.13 E 800 ±5 20.32 ±0.13 Not Recommended for New Designs
6.2 Recommended PCB Footprint
All dimensions in Figure 4 are in thousands of an inch unless otherwise marked. Figure 4. AMWx36 Recommended Footprint (Top)
6.3 Routing Recommendations
these recommendations may result in degraded performance of WLAN functionality.
ADS-MWx36-102R • AMWx36 Datasheet Page | 11 © 2014-2019 Zentri http://www.zentri.com June 26, 2019
6.4 Soldering Information
Figure 5 - Recommended solder reflow profile Figure 6 - Example solder reflow profile (AMWx36-E03 evaluation board) Not Recommended for New Designs
6.5 Module Photograph
Figure 7. AMW036 Image (Top)
6.6 Application Examples
6.6.1 Operation using ZentriOS Serial
API app running on the internal microcontroller. Figure 8. Using the AMWx36 Module with ZentriOS and a UART serial interface
ADS-MWx36-102R • AMWx36 Datasheet Page | 13 © 2014-2019 Zentri http://www.zentri.com June 26, 2019
7 Regulatory Certification
The AMWx36 module has been certified for operation in various regulatory domains. This section outlines certification information specific to the following countries and regions: United States Canada Europe Australia New Zealand Japan The certifications listed in this section are valid at the time of publication. For up- to-date information refer to Zentri documentation online at: https://docs.zentri.com. All AMWx36 test reports are available on the Zentri website: https://docs.zentri.com/zentri/docresources#amw036 Should you require regulatory certification for the AMWx36 module in a country or region not listed, please contact your local Zentri sales office or create a support request via our website at https://www.silabs.com/about-us/contact-us.
7.1 United States
The Zentri AMWx 36 module has received Federal Communications Commission (FCC) CFR47 Telecommunications, Part 15 Sub- part C “Intentional Radiators” modular approval in accordance with Part 15.212 Modular Transmitter approval. Modular approval allows the end user to integrate the AMWx 36 module into a finished product without obtaining subsequent and separate FCC approvals for intentional radiation, provided no changes or modifications are made to the module circuitry. Changes or modifications could void the user’s authority to operate the equipment. The end user must comply with all of the instructions provided by the Grantee which indicate installation and/or operating conditions necessary for compliance. The finished product is required to comply with all applicable FCC equipment authorization, regulations, requirements, and equipment functions not associated with the transmitter module portion. For example, compliance must be demonstrated to regulations for other transmitter components within the host product; to requirements for unintentional radiators (Part 15 Sub- part B “Unintentional Radiators”), such as digital devices, computer peripherals, radio receivers, etc.; and to additional authorization requirements for non- transmitter functions on the transmitter module (i.e. Verification, or Declaration of Conformity) (e.g., transmitter modules may also contain digital logic functions) as appropriate.
7.1.1 Labeling and User Information
The AMWx36 module has been labelled with a unique FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the outside of the finished product into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording as follows: Contains FCC ID: 2ABPY-B5BD9 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Not Recommended for New Designs
ADS-MWx36-102R • AMWx36 Datasheet Page | 14 © 2014-2019 Zentri http://www.zentri.com June 26, 2019 The user manual for the product should include the following statement: Additional information on labeling and user information requirements for Part 15 devices can be found in KDB Publication 784748 available at the FCC Office of Engineering and Technology (OET) Laboratory Division Knowledge Database (KDB) at the following website: http://www.fcc.gov
7.1.2 RF Exposure
All transmitters regulated by FCC must comply with RF exposure requirements. OET Bulletin 65, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields, provides assistance in determining whether proposed or existing transmitting facilities, operations or devices comply with limits for human exposure to Radio Frequency (RF) fields adopted by the Federal Communications Commission (FCC). The bulletin offers guidelines and suggestions for evaluating compliance. If appropriate, compliance with exposure guidelines for mobile and unlicensed devices can be accomplished by the use of warning labels and by providing users with information concerning minimum separation distances from transmitting structures and proper installation of antennas. The following statement must be included as a CAUTION statement in manuals and OEM products to alert users of FCC RF exposure compliance: If the AMWx36 module is used in a portable application (i.e., the antenna is less than 20 cm from persons during operation), the integrator is responsible for performing Specific Absorption Rate (SAR) testing in accordance with FCC rules 2.1091.
7.1.3 Further Information
Additional information regarding FCC certification and use of the AMWx 36 module in the United States is available from the following sources. Federal Communications Commission (FCC) http://www.fcc.gov This equipment has been tested and found to com - ply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by t urning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than this distance is not recommended. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter Not Recommended for New Designs
ADS-MWx36-102R • AMWx36 Datasheet Page | 15 © 2014-2019 Zentri http://www.zentri.com June 26, 2019
7.2 Canada
The AMWx 36 module has been certified for use in Canada under Industry Canada (IC) Radio Standards Specification (RSS) RSS-2 47 and RSSGen. Modular approval permits the installation of a module in a host device without the need to recertify the device.
7.2.1 Labeling and User Information
Labeling Requirements for the Host Device (from Section 3.2.1, RSS-Gen): The host device shall be properly labeled to identify the module within the host device. The Industry Canada certification label of a module shall be clearly visible at all times when installed in the host device, otherwise the host device must be labeled to display the Industry Canada certification number of the module, preceded by the words “Contains transmitter module”, or the word “Contains”, or similar wor ding expressing the same meaning, as follows: User Manual Notice for License-Exempt Radio Apparatus (from Section 7.1.3 RSS-Gen): User manuals for license- exempt radio apparatus shall contain the following or equivalent notice in a conspicuous location in the user manual or alternatively on the device or both: Transmitter Antenna Notification (from Section 7.1.2 RSS-Gen): User manuals for transmitters shall display the following notice in a conspicuous location: The above notice may be affixed to the device instead of displayed in the user manual. Contains transmitter module IC: 11685A-B5BD9 This device complies with Industry Canada license - exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux onditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Can - ada, le présent émetteur radio peut fonctionner avec une ant enne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouil - lage radioélectrique à l'intention des autres utilisa - teurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Not Recommended for New Designs
ADS-MWx36-102R • AMWx36 Datasheet Page | 16 © 2014-2019 Zentri http://www.zentri.com June 26, 2019 User manuals for transmitters equipped with detach- able antennas shall also contain the following notice in a conspicuous location: Immediately following the above notice, the manufacturer shall provide a list of all antenna types approved for use with the transmitter, indicating the maximum permissible antenna gain (in dBi) and required impedance for each.
7.2.2 RF Exposure
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance o f 20cm between the radiator and your body. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnemen t non-contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
7.2.3 Further Information
Additional information may be obtained from the Industry Canada website at http://www.ic.gc.ca This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Not Recommended for New Designs
7.3 Europe
being integrated into a final product. Opinion has also been issued.
7.3.1 Labeling and User Information
AMWx36 module must follow CE marking requirements. Note 01 provides guidance on final product CE marking.
7.3.2 Further Information
Table 12. European Compliance Testing Table 12. European Compliance Testing , the module the essential requirements of the R&TTE Directive.
7.4 Australia
7.4.1 Further Information
website at http://www.acma.gov.au.
7.5 New Zealand
https://www.silabs.com/about-us/contact-us.
7.5.1 Further Information
Development website at http://www.rsm.govt.nz.
7.6 Japan
operation with the antenna supplied. Table 13. Japan Compliance Testing VCCI V-3/2014.04 Class B ITE JV560122 Jul 1, 2015 Sporton International, Inc.
Packaging, Handling and Storage, RoHS ADS-MWx36-102R • AMWx36 Datasheet Page | 19 © 2014-2019 Zentri http://www.zentri.com June 26, 2019
8 Packaging, Handling and Storage, RoHS
8.1 Packaging
Modules are shipped in cut tape, with ESD-safe packaging, or in reels. For package quantity, see section 9, Ordering Information. Reels are shipped inside a moisture resistant sealed bag. The shelf life of the sealed reel is 12 months at 40°C and <90% Relative Humidity (RH). Please refer to the bag seal date and the following section for handling & storage. Ensure that all modules are managed in accordance with Moisture Sensitive Level 3 (MSL3) per IPC/JEDEC J-STD-20. AMWx36 modules should be hand-soldered ONLY . If reflow is required, AMWx36 modules must be baked first according to Joint Industry Standard J-STD-033C.
8.2 Handling & Storage
MSL3 Sensitive Device! The AMWx36 module is a moisture sensitive device rated at Moisture Sensitive Level 3 (MSL3) per IPC/JEDEC J-STD- 20. After opening the moisture sealed storage bag, modules that will be subjected to reflow solder or other high temperature processes must be: 1. mounted to a circuit board within 168 hours at factory conditions (≤30°C and <60% RH) OR 2. continuously stored per IPC/JEDEC J-STD-033 Modules that have been exposed to moisture and environmental conditions exceeding packaging and storage conditions MUST be baked before mounting according to IPC/JEDEC J-STD-033. Failure to meet packaging and storage conditions will result in irreparable damage to modules during solder reflow.
8.3 RoHS Directive
The AMWx36 module is produced according to the RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment) directive and complies with the directive. Not Recommended for New Designs
Packaging, Handling and Storage, RoHS ADS-MWx36-102R • AMWx36 Datasheet Page | 20 © 2014-2019 Zentri http://www.zentri.com June 26, 2019
8.4 Tape and Reel Specifications
A0 B0 D0 E F K0 P P0 S0 T W 20.40 ±0.10 23.40 ±0.10 1.50 ±0.10 1.75 ±0.10 20.20 ±0.10 3.90 ±0.10 28.00 ±0.10 4.00 ±0.10 40.40 ±0.15 0.30 ±0.05 44.0 ±0.30 All dimensions in mm unless otherwise specified Sprocket hole pitch cumulative tolerance ± 0.2mm Carrier camber not to exceed 1mm in 100mm All dimensions meet EIA-481C requirements Material: PS black polystyrene Thickness: 0.30 ± 0.05mm Packing length per 13” reel: 24.6 meters. Component load per 13” reel: 500pcs This product conforms to ROHS environmental protection Not Recommended for New Designs
Ordering Information
ADS-MWx36-102R • AMWx36 Datasheet Page | 21 © 2014-2019 Zentri http://www.zentri.com June 26, 2019
9 Ordering Information
You can order AMWx36 as either cut tape loaded with an unspecified ZentriOS, or as a full reel of 500 units pre-loaded with either a specific ZentriOS version or a version of your embedded custom application. When you order, refer to the OPN (Orderable Part Number), as described below. For examples, see Table 14. Ordering Information.
9.1 Ordering an Unspecified ZentriOS Version
Order OPN: AMWx36 When ordering an unspecified ZentriOS version as cut tape, the OPN is of the form <platform>, where <platform> is AMW036 or AMW136. When ZentriOS version is unspecified, orders of AMW036 or AMW136 modules ship with whatever versions of ZentriOS are available. The ZentriOS version is not guaranteed to be the same for all items shipped. Cut tape is suitable for sampling, evaluation, and pilot builds. Upon delivery, you can update modules individually, via OTA (Over-The-Air update), with a specific firmware version.
9.2 Ordering a Specific ZentriOS Version or a Custom Firmware Version
ZentriOS version order OPN: AMWx36-x.y.zR Custom firmware version OPN: AMWx36-xxxxxxR Volume orders are delivered in reels, as indicated by the R suffix. To ensure consistency, an OPN is specified, corresponding to a specific version. ZentriOS version: the OPN is of the form <platform>-x.y.zR, where <platform> is AMW036 or AMW136, and x is the major version, y is the minor version and z is the patch version. Custom firmware version: the OPN is of the form <platform>-xxxxxx, where <platform> is AMW036 or AMW136, and xxxxxx is a unique ID indicating a specific product version. Zentri ships reels with the product version specified. Custom firmware can be a product bundle for the AMW036 or AMW136. A custom product bundle includes a specific version of ZentriOS. An AMW136 ZAP product bundle also contains a ZAP (ZentriOS application). Table 14. Ordering Information
Revision History & Glossary ADS-MWx36-102R • AMWx36 Datasheet Page | 22 © 2014-2019 Zentri http://www.zentri.com June 26, 2019
9.3 ZentriOS Version History
ZentriOS firmware revision history is available online at: ZentriOS-W: https://docs.zentri.com/zentrios/editions-and-versions#zentriosw ZentriOS-WZ: https://docs.zentri.com/zentrios/editions-and-versions#zentrioswz
10.1 Revision History
Table 15: Document Revision History Revision Date Change Description ADS-MWx36-100R Jun 6, 2016 Initial preliminary release ADS-MWx36-101R Aug 3, 2017 Revised Ordering Information. Added Dimensions section. Added Firmware Features page. Added I2C pins. Updated European Certification ADS-MWx36-101R June 26, 2019 Added Canada RF exposure section.
10.2 Glossary
In most cases, acronyms and abbreviations are defined on first use. A comprehensive list of acronyms and other terms used in Zentri documents are provided at https://docs.zentri.com/zentri/glossary.
11 References
Throughout this data sheet, references to other documents are listed. The following documents provide additional material: 1. IEEE 802.11 Standard Institute of Electrical and Electronics Engineers. http://standards.ieee.org Not Recommended for New Designs
Smart. Connected. Energy-Friendly.Products www.silabs.com/products Quality www.silabs.com/quality Support and Community community.silabs.com http://www.silabs.com Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 78701 USA Disclaimer Silicon Labs intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or intending to use the Silicon Labs products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Labs reserves the right to make changes without further notice to the product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included information. Without prior notification, Silicon Labs may update product firmware during the manufacturing process for security or reliability reasons. Such changes will not alter the specifications or the performance of the product. Silicon Labs shall have no liability for the consequences of use of the information supplied in this document. This document does not imply or expressly grant any license to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any FDA Class III devices, applications for which FDA premarket approval is required or Life Support Systems without the specific written consent of Silicon Labs. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant personal injury or death. Silicon Labs products are not designed or authorized for military applications. Silicon Labs products shall under no circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons. Silicon Labs disclaims all express and implied warranties and shall not be responsible or liable for any injuries or damages related to use of a Silicon Labs product in such unauthorized applications. Trademark Information Silicon Laboratories Inc.® , Silicon Laboratories®, Silicon Labs®, SiLabs® and the Silicon Labs logo®, Bluegiga®, Bluegiga Logo®, ClockBuilder®, CMEMS®, DSPLL®, EFM®, EFM32®, EFR, Ember®, Energy Micro, Energy Micro logo and combinations thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZRadio®, EZRadioPRO®, Gecko®, Gecko OS, Gecko OS Studio, ISOmodem®, Precision32®, ProSLIC®, Simplicity Studio®, SiPHY®, Telegesis, the Telegesis Logo®, USBXpress® , Zentri, the Zentri logo and Zentri DMS, Z-Wave®, and others are trademarks or registered trademarks of Silicon Labs. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. Wi-Fi is a registered trademark of the Wi-Fi Alliance. All other products or brand names mentioned herein are trademarks of their respective holders. Not Recommended for New Designs