894-IM NYLENE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
NYLENE USA NYLENE CANADA ULC. ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities, en 1421 Hwy 136 West 200 McNab Street Product is manufactured in Henderson, KY Cy y! ene Henderson, Kentucky 42420 Arnprior, Ontario K7S 3P2 Web: www.nylene.com | Email: info@nylene.com Phone: 270-826-7641 Phone: 613-623-3191 TDS Ref ID: 1501 Toll-free: 800-626-7050 Toll-free: 800-267-7304 Date Updated October 11, 2024 Nylene® 894 IM Technical Data Sheet : "Copolymer, Resin Type: Copolymer, Nylon 6/69 processing Method(s): Description: © Rotational Molding Engineered, High Impact Resistance, Heat Stabilized, Nylon Copolymer * Rotational Molding = CARB and EPA Fuel Permeation Regulation Compliant . . Additives/Modifiers: Properties ASTM/ISO Unit English sl Procedure * Impact Modified Physical Form(s)/Color(s): Specific Gravity D792 1.08 1 * Pellets Water Absorption 570 % 18 impact Features: Drop Impact - Roto Specimen, 73°F ARM ft-lbs >145 + Gasoline permeation resistance Cre * Good impact strength * Heat stabilized Tensile Strength At Yield, 73°F 0638 psi (MPa) 6500 45 «= Process at lower temperatures Tensile Elongation D638 % >100 compared to nylon 6 Flexural Modulus D790 psi (MPa) 200000 1,379 End Uses: Thermal = Automotive Deflection Temp. 1/8" bar, 66 psi D638 °F (°C) 200 93 * Fuel Applications Deflection Temp. 1/8" bar, 264 psi D638 °F (°C) no 43 * Diesel Tanks * Fuel Tanks Melt Point 03418 °F (°C) 428 220 * Gasoline Tanks - Multi-Layer Flammabilit, * Gasoline Tanks - Single Layer uy * Lawn and Garden Flame Resistance uLea ane" HB * Tool & Appliance (3.0mm) Automotive FMV S302 Pass Disclaimer Nylene does not guarantee the accuracy of this information or the suitability of this Notes: * available in Pre-Dried, Foil Lined Bags product for any given application or usage situation. These values are based on test specimens and should not be used to Recommended Processing Considerations: Rotational Molding Copolymer establish specification limits or fabricate i S€TF toting. Heating Time 20 to 25 Maximum Moisture* 0.20% Oven Temperature 550 - 650°F (288-343°C) + Available in Pre-Dried, Foil Lined Bags.