55GR30HS-IM4 NYLENE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
NYLENE USA NYLENE CANADA ULC. ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities en 1421 Hwy 136 West 200 McNab Street Product is manufactured in Henderson, KY ame y! ene Henderson, Kentucky 42420 Arnprior, Ontario K7S 3P2 Web: www.nylene.com | Email: info@nylene.com - Phone: 270-826-7641 Phone: 613-623-3191 TDS Ref ID: 28603 Toll-free: 800-626-7050 Toll-free: 800-267-7394 Date Updated December 12, 2023 Nylene® 55GR30HS IM4 Technical Data Sheet 2: * Nylon 6/1: Resin Type: * Nylon 6/12 processing Methodts): Description: * 30% Glass Reinforced, Heat Stabilized, Improved Impact Resistance, Nylon 6/12 * Injection Molding Properties ASTM/ISO Unit English sl Fillers/Reinforcements: Procedure *30% Glass Filled Physical Specific Gravity p792 1.27 1 Additives/Modifiers: Filler/Reinforcement 5630 % 30 30 " Heat Stabilizer Impact Form(s)/Color(s): Izod Impact Resistance: Notched 1/8" D256 ft-lb/in (J/m) 24 12 bar, 73°F * Natural * Pellets Mechanical Tensile Strength At Yield, 73°F D638 psi (MPa) 19500 134 Features: Tensile Elongation D638 % 3 3 «= Improved impact resistance Flexural Modulus D790 psi (MPa) 950000 6,550 Flexural Strength 790 psi (MPa) 35000 241 Disctalmer Nylene does not guarantee the accuracy of bem this information or the suitability of this Deflection Temp. 1/8" bar, 66 psi Deas °F (°C) 410 210 product for any given application or usage . oes situation. These values are based on test Deflection Temp. 1/8" bar, 264 psi Deas F (°C) 340 m specimens and should not be used to Flammability establish specification limits or fabricate tooling Flame Resistance uL94 m8" HB (3.0mm) Recommended Processing Considerations: PA 6/12 Injection Molding Drying Temperature 180°F (82°C) Drying Time 2-4 hrs. max. Maximum Moisture 0.002% Rear 460-520°F (238-271°C) Middle 480-520°F (249-271°C) Front 480-520°F (249-271°C) Nozzel 480-540°F (249-282°C) Melt Temperature 480-560°F (249-293)°C) Mold Temperature 80-160°F (27-71°C) Back Pressure 50 to 100 psi