4114-33 NYLENE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
NYLENE USA NYLENE CANADA ULC. ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities en 1421 Hwy 136 West 200 McNab Street Product is manufactured in Wayne, NJ one) Nylene Henderson, Kentucky 42420 Arnprior, Ontario K7S 3P2 Web: www.nylene.com | Email: info@nylene.com Phone: 270-826-7641 Phone: 613-623-3191 ‘TDS Ref ID: 1337 Toll-free: 800-626-7050 Toll-free: 800-267-7394 Date Updated September 20, 2024 Nylene® 4114-33 Technical Data Sheet Resin Type: Nylon 6/6 Processing Method{(s): Description: = Nylene 4114-33 is a compounded, impact-modified, 33% glass fiber-reinforced nylon 6/6 molding * Injection Molding resin with excellent impact strength Fillers/Reinforcements: Properties ASTMI/ISO Procedure Unit English sl 933% Glass Filled Physical Specific Gravity D792 nla 133 1 Additives/Modifiers: Mold Shrinkage D955 mm/mm 0.003 * Impact Modified Mechanical Form(s)/Color(s): Tensile Strength D638 psi (MPa) 17000 W * Pellets Flexural Modulus D790 psi (MPa) 950000 6,550 Elongation @ Break D638 % 6 Features: Notched Izod @ 23°C D256 ft-Ib/in (u/m) 28 150 * High stiffness a * High toughness DTUL @ 264 psi/1.82 MPa Deas °F (°C) 453 234 End Uses: Melt Point 03418 °F (°C) 498 259 * General End Uses "Clips Notes: Testing conducted on dry-as-molded specimens at 73°F (22.8°C} * Fasteners " Handles = Support Brakets | ce a . | * Industrial & Construction Recommended Processing Considerations: PA6/6 Injection Molding - Glass Reinforced >15% * Levers Pressure psi Injection 5-15,000 Disclaimer Nylene does not guarantee the accuracy of Hold 4-12,000 this information or the suitability of this Back 0-50 _ product for any given application or usage situation. These values are based on test specimens and should not be used to establish specification limits or fabricate Melt Temperature: Nylene PA6/6 melts at 490 °F (254°C), actual melt temperatures of 540-600 (282-316°C) are tooling. permissible, depending on residence time and shot size. Mold Temperature: 120-200 °F (49-93°C), highly filled grades require 180-200 °F (82-93°C) to obtain the best overall surface appearance, higher temperatures will increase crystallinity. Residence Time: should not exceed 6 minutes if possible, less with higher melt temperatures. Shot Size: should be between 25-75% of barrel capacity. Fill Rate: fast fill rates are suggested for best surface appearance. Regrind Level: typically no more than 25% is recommended, with higher levels possible for unfilled grades depending on the end use requirements. Make certain regrind is properly dried to virgin moisture levels. Drying Temperature: 150-180 °F (65-182°C) (for 2-4 hours, Nylene PA6/6 should be dried to less than 0.20% moisture for optimum performance. Drying longer than 4 hours or at higher temperatures may cause oxidation of the polymer or remove essential volatiles.