52GR30HS NYLENE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
NYLENE USA NYLENE CANADA ULC. ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities en 1421 Hwy 136 West 200 McNab Street Product is manufactured in Henderson, KY on) Yy! ene Henderson, Kentucky 42420 Arnprior, Ontario K7S 3P2 Web: www.nylene.com | Email: info@nylene.com Phone: 270-826-7641 Phone: 613-623-3191 TDS Ref ID: 28572 Toll-free: 800-626-7050 Toll-free: 800-267-7394 Date Updated December 12, 2023 Nylene® 52GR30HS Technical Data Sheet Resin Type: * Nylon 6 Processing Method{(s): Description: * 30% Glass Reinforced, Heat Stabilized, Nylon 6 * Injection Molding Properties ASTM/ISO Unit English sl Fillers/Reinforcements: Procedure "30% Glass Filled Physical Specific Gravity D792 1.37 1 Additives/Modifiers: Filler/Reinforcement 05630 % 30 30 " Heat Stabilizer Mold Shrinkage, Linear infin 001 to .005 Form(s)/Color(s): Mold Shrinkage, Transverse infin 003 to .008 = Natural Le * Pellets Izod Impact Resistance: Notched 1/8" D256 ft-Ib/in (u/m) 18 96 bar, 73°F Disclaimer Mechanical Nylene does not guarantee the accuracy of this information or the suitability of this Tensile Strength At Yield, 73°F D638 psi (MPa) 22500 155 product for any given application or usage Tensile Elongation D638 % 3 3 situation. These values are based on test : M 790 we. 00000 ysas specimens and should not be used to texural Modulus al (MPa) ’ establish specification limits or fabricate Flexural Strength D790 psi (MPa) 37500 259 tooling. Thermal Deflection Temp. 1/8" bar, 66 psi Deas °F (°C) 420 216 Deflection Temp. 1/8" bar, 264 psi Deas °F (°C) 400 204 Flammability Flame Resistance uL9a m8" HB (3.0mm) Recommended Processing Considerations: Very High Impact Resistance Drying Temperature 180°F (82°C) Drying Time 2-4 hrs. max Maximum Moisture 0.20% Rear 460-520°F (238-271°C) Middle 480-520°F (249-271°C) Front 480-520°F (249-271°C) Nozzel 480-560°F (249-293°C) Melt Temperature 480-560°F (249-293)°C) Mold Temperature 80-160°F (27-71°C) Back Pressure 50 to 100 psi