51WF40 NYLENE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
NYLENE USA NYLENE CANADA ULC. ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities en 1421 Hwy 136 West 200 McNab Street Product is manufactured in Henderson, KY on) Yy! ene Henderson, Kentucky 42420 Arnprior, Ontario K7S 3P2 Web: www.nylene.com | Email: info@nylene.com Phone: 270-826-7641 Phone: 613-623-3191 ‘TDS Ref ID: 28529 Toll-free: 800-626-7050 Toll-free: 800-267-7394 Date Updated December 12, 2023 Nylene® 51WF40 Technical Data Sheet Resin Type: * Nylon 6/6 Processing Method{(s): Description: * 40% Mineral Reinforced, Nylon 6/6 Performance Compound * Injection Molding Properties ASTM/ISO Unit English si Fillers/Reinforcements: Procedure "40% Mineral Filled Physical Specific Gravity D792 15 2 Form(s)/Color(s): Filler/Reinforcement 5630 % 40 40 * Natural * Pellets Mold Shrinkage, Linear infin .001 to .005 Mold Shrinkage, Transverse invin 003 to .009 Disclaimer Impact Nylene does not guarantee the accuracy of this information or the suitability of this Izod Impact Resistance: Notched 1/8" D256 ftelb/in (Jim) 06 32 product for any given application or usage bar, 73°F Cond situation. These values are based on test ont specimens and should not be used to establish specification limits or fabricate Tensile Strength At Yield, 73°F D638 psi (MPa) 13800 95 tooling. Tensile Elongation 0638 % 3 3 Flexural Modulus 0790 psi (MPa) 1250000 8,619 Flexural Strength D790 psi (MPa) 11500 79 Thermal Deflection Temp. 1/8" bar, 66 psi D648 °F (°C) 470 243 Deflection Temp. 1/8" bar, 264 psi 0648 °F (°C) 400 204 Flammability Flame Resistance uLo4 me" HB (3.0mm) Recommended Processing Considerations: PA 6/6 Injection Molding - 40% Mineral Reinforced Drying Temperature 180°F (82°C) Drying Time 2-4 hrs. max. Maximum Moisture 0.002% Rear 460-520°F (238-271°C) Middle 480-520°F (249-271°C) Front 480-520°F (249-271°C) Nozzel 480-560°F (249-293°C) Melt Temperature 480-540°F (249-282)°C) Mold Temperature 80-160°F (27-71°C) Back Pressure 50 to 100 psi