51GR43HSL-IM8 NYLENE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
NYLENE USA NYLENE CANADA ULC. ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities, en 1421 Hwy 136 West 200 McNab Street Product is manufactured in Henderson, KY one) y! ene Henderson, Kentucky 42420 Arnprior, Ontario K7S 3P2 Web: www.nylene.com | Email: info@nylene.com Phone: 270-826-7641 Phone: 613-623-3191 TDS Ref ID: 28519 Toll-free: 800-626-7050 Toll-free: 800-267-7304 Date Updated December 12, 2023 Nylene® 51GR43HSL IM8 Technical Data Sheet Resin Type: Nylon 6/6 Processing Method{(s): Description: * 43% Glass Reinforced, Heat Stabilized, Impact Modified, Nylon 6/6 * Injection Molding Fillers/Reinforcements: Properties ASTMIISO Unit English sl 43% Glass Filled Procedure Physical Additives/Modifiers: Specific Gravity D792 1.43 1 * Heat Stabilizer Filler/Reinforcement 5630 % 43 43 * Impact Modified Impact Form(s)/Color(s): Izod Impact Resistance: Notched 1/8" 256 ftelb/in (u/m) 36 192 bar, 73°F * Natural * Pellets Mechanical Tensile Strength At Yield, 73°F D638 psi (MPa) 24000 165 Disclaimer Tensile Elongation peas % 3 3 Nylene does not guarantee the accuracy of this information or the suitability of this Flexural Modulus D790 psi (MPa) 1500000 10,343 product for any given application or usage Flexural Strength b790 psi (MPa) 37500 259 situation. These values are based on test specimens and should not be used to Thermal establish specification limits or fabricate Deflection Temp. 1/8" bar, 66 psi Deas °F (°C) 500 260 tooling Deflection Temp. 1/8" bar, 264 psi D648 °F (°C) 485 252 Flammability Flame Resistance uLoa a8" HB (3.0mm) Recommended Processing Considerations: PA 6/6 Injection Molding - Glass Reinforced 15% - 50% Drying Temperature 180°F (82°C) Drying Time 2-4 hrs, max. Maximum Moisture 0.002% Rear 500-540°F (260-282°C) Middle 500-560°F (260-293°C) Front 500-560°F (260-293°C) Nozze! 500-560°F (260-293°C) Melt Temperature 520-560°F (271-293)°C) Mold Temperature 80-160°F (27-71°C) Back Pressure 50 to 100 psi