51GMR2515 NYLENE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
NYLENE USA NYLENE CANADA ULC. ISO/IEC 17025 & ISO 9001:2015 Accredited Facilities en 1421 Hwy 136 West 200 McNab Street Product is manufactured in Henderson, KY one) y! ene Henderson, Kentucky 42420 Arnprior, Ontario K7S 3P2 Web: www.nylene.com | Email: info@nylene.com Phone: 270-826-7641 Phone: 613-623-3191 TDS Ref ID: 28486 Toll-free: 800-626-7050 Toll-free: 800-267-7394 Date Updated December 12, 2023 Nylene® 51GMR2515 Technical Data Sheet Resin Type: Nylon 6/6 Processing Method{(s): Description: = 40% Glass & Mineral Reinforced, Nylon 6/6 * Injection Molding Fillers/Reinforcements: Properties ASTM/ISO Unit English si * 40% Glass/Mineral Filled Procedure Physical Form(s)/Color(s): Specific Gravity p792 1.48 1 = Natural * Pellets Filler/Reinforcement D5630 % 40 40 Impact Disclaimer Izod Impact Resistance: Notched 1/8" D256 ft-Ib/in (ulm) 16 85 Nylene does not guarantee the accuracy of bar, 73°F this information or the suitability of this oduct for any given application or usage Mechanical . yen 3PP s situation. These values are based on test Tensile Strength At Yield, 73°F D638 psi (MPa) 22800 157 specimens and should not be used to establish specification limits or fabricate Tensile Elongation D638 % 3 3 tooling Flexural Modulus 790 psi (MPa) 1450000 9,998 Flexural Strength 790 psi (MPa) 32500 224 Thermal Deflection Temp. 1/8" bar, 66 psi D648 °F (°C) 500 260 Deflection Temp. 1/8" bar, 264 psi D648 °F (°C) 455 235 Flammability Flame Resistance uLoa 8" HB (3.0mm) Recommended Processing Considerations: PA 6/6 Injection Molding - 20%-40% Mineral Reinforced Drying Temperature 180°F (82°C) Drying Time 2-4 hrs. max. Maximum Moisture 0.002% Rear 480-540°F (249-282°C) Middle 520-560°F (271-293°C) Front 520-560°F (271-293°C) Nozzel 520-560°F (271-293°C) Melt Temperature 520-540°F (271-282)°C) Mold Temperature 80-160°F (27-71°C) Back Pressure 50 to 100 psi