LMT-080S050STF Datasheet | DigiCamel IC Datasheet

Manufacturer Specifications

Compare LMT-080S050STF variants.

Select a manufacturer to view its specifications, local PDF, and searchable HTML text.

1 manufacturers / 1 documents

Manufacturer	Series	Package	Documents	Available	Select specification
Inventronics Inc.	-	-	1	PDF HTML	Viewing

Online Datasheet

Read the Inventronics Inc. document online.

LMT-080SXXXSTF INVENTRONICS

Document overview

Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
PDF pages: 11

Technical content

Features

Description

The LMT-080SxxxSTF series is a 80W, constant-current, IP20 LED driver that operates from 198-264 Vac input with excellent power factor. Created for linear troffer and panel lighting, the high efficiency of these drivers and slim metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range (1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Power Factor (3) Model Number 250-500mA 350-500mA ﹤250mA 198~264 Vac 190~250 Vdc 96-229Vdc 80 W 94.0% 0.98 LMT-080S050STF 340-700mA 500-700mA ﹤340mA 198~264 Vac 190~250 Vdc 68-160Vdc 80 W 94.0% 0.98 LMT-080S070STF 500-1050mA 700-1050mA ﹤500mA 198~264 Vac 190~250 Vdc 45-114Vdc 80 W 93.0% 0.98 LMT-080S105STF Notes: (1) Output current range with constant power at 80W (2) Certified voltage range: 220-240Vac or 190-250Vdc (except CCC) (3) Measured at 100% load and 220Vac input (see below “General Specifications” for details). Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 198 Vac - 264 Vac 190~250 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.70 mA IEC60598-1; 240Vac/ 60Hz Input AC Current - - 0.43 A Measured at 100% load and 220 Vac input. Inrush Current(I2t) - - 0.35 A 2s At 220Vac input, 25°C Cold Start, Duration =194 μs, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details.

Ultra High Efficiency (Up to 94.0%)
Adjustable Output Current (AOC) with External Resistor
Full Power at Wide Output Current Range (Constant Power)
Flicker- Free
Non-dimming Control
89,000 Hours Lifetime at 70°C Case Temperature
Input Surge Protection: 1kV line-line, 2kV line-earth
Suitable for Luminaires with Protection Class I
Complies with Zhaga Interface Specification Book 13
Non-Isolated Design
5 Year Warranty

Specifications are subject to changes without notice. 80W Non-isolated IP20 DriverLMT-080SxxxSTF Rev. A www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications (Continued) Parameter Min. Typ. Max. Notes PF 0.90 - - At 220-240Vac, 50-60Hz, 70%-100% Load THD - - 10% At 220-240Vac, 50-60Hz, 75%-100% Load (60-80W) Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset At 100% load condition Output Current Setting(Ioset) Range LMT-080S050STF LMT-080S070STF LMT-080S105STF 250 mA 340 mA 500 mA 500 mA 700 mA 1050 mA Output Current Setting Range with Constant Power LMT-080S050STF LMT-080S070STF LMT-080S105STF 350 mA 500 mA 700 mA 500 mA 700 mA 1050 mA Total Output Current Ripple (pk-pk) - 30%Iomax 50%Iomax At 100% load condition Output Current Ripple at < 200 Hz (pk-pk) - 2%Iomax - At 100% load condition. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10 %Iomax At 100% load condition No Load Output Voltage - - 400 V Line Regulation - - ±1% Measured at 100% load Load Regulation - - ±5% Turn-on Delay Time - - 0.5 s Measured at 220-240Vac input, 70%-100%load Temperature Coefficient of Ioset - 0.06%/°C - Case temperature = 0°C ~Tc max Note: All specifications are typical at 25°C unless otherwise stated. General Specifications Parameter Min. Typ. Max. Notes Efficiency at 220 Vac input: LMT-080S050STF Io= 350 mA Io= 500 mA LMT-080S070STF Io= 500 mA Io= 700 mA LMT-080S105STF Io= 700 mA Io=1050 mA 92.00% 91.50% 92.00% 91.50% 91.00% 90.00% 94.00% 93.50% 94.00% 93.50% 93.00% 92.00% Measured at 100% load and steady-state temperature in 25°C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.)

Specifications are subject to changes without notice. 80W Non-isolated IP20 DriverLMT-080SxxxSTF Rev. A www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes MTBF - 327,000 Hours - Measured at 220Vac input, 80%Load and 25°C ambient temperature (MIL-HDBK-217F) Lifetime - 89,000 Hours - Measured at 220Vac input, 80%Load and 70°C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -30°C +90°C Operating Case Temperature for Warranty Tc_w -30°C +75°C Case temperature for 5 years warranty. No condensation. Storage Temperature -30°C - +85°C Humidity: 5%RH to 85%RH; No condensation. Dimensions Inches (L × W × H) Millimeters (L × W ×H) 280 × 30 × 21 Net Weight - 245 g - Note: All specifications are typical at 25°C unless otherwise stated. Safety & EMC Compliance Safety Category Standard ENEC & CE EN61347-1, EN61347-2-13 CCC GB 19510.1, GB 19510.14 KS KS C 7655 Performance Standard ENEC EN 62384 EMI Standards Notes EN 55015/GB 17743(1) Conducted emission Test &Radiated emission Test EN 61000-3-2/GB 17625.1 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker EMS Standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electrom agnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: Differential Mode 1 kV, Common Mode 2 kV EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips

Specifications are subject to changes without notice. 80W Non-isolated IP20 DriverLMT-080SxxxSTF Rev. A www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Safety & EMC Compliance (Continued) EMS Standards Notes EN 61547 Electromagnetic Immunity Require ments Applies To Lighting Equipment Notes: (1) This LED driver meets the EMI sp ecifications above, but EM I performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Lifetime vs. Case Temperature Inrush Current Waveform

Specifications are subject to changes without notice. 80W Non-isolated IP20 DriverLMT-080SxxxSTF Rev. A www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Efficiency vs. Load LMT-080S050STF(lo=350mA) LMT-080S050STF(lo=500mA) LMT-080S070STF(lo=500mA) LMT-080S070STF(lo=700mA) LMT-080S105STF(lo=700mA) LMT-080S105STF(lo=1050mA)

Specifications are subject to changes without notice. 80W Non-isolated IP20 DriverLMT-080SxxxSTF Rev. A www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Power Factor Total Harmonic Distortion Protection Functions Parameter Notes Over Temperature Protection Decreases output current, re turning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails.

Specifications are subject to changes without notice. 80W Non-isolated IP20 DriverLMT-080SxxxSTF Rev. A www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Wire Connection Wire Connection 1 AC I NPUT L N LED Load Resi st or Setti ng L(BLACK)N( WHI TE) PE(GREEN) LED+(RED)LED-(BLACK)LED+(RED)LED-(BLACK) Iset +( WHI TE)Iset-(BLACK) Wire Connection 2 AC I NPUT L N LED Load+ LED Load Resist or Setti ng L(BLACK)N( WHI TE) PE( GREEN) LED+(RED)LED-(BLACK)LED+(RED)LED-(BLACK) Iset +( WHI TE)Iset-(BLACK) Parameter Min. Typ. Max. Notes L, N, Wire Cross-section 0.5 mm2 - 1.5 mm 2 Push-in at 45ºangle, solid and stranded wire 20 AWG - 16 AWG Strip Length 8 mm - 9 mm LED+, LED+, LED-, LED-, Iset+, Iset- Wire Cross-section 0.5 mm 2 - 1.5 mm 2 Push-in at 45ºangle, solid and stranded wire 20 AWG - 16 AWG Strip Length 8 mm - 9 mm

Specifications are subject to changes without notice. 80W Non-isolated IP20 DriverLMT-080SxxxSTF Rev. A www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Output Current vs. Resistor Setting (Iset)  LMT-080S050STF Resistor Setting (Iset) Output Current Output Voltage Range Notes Typ. Typ. Min. Max. / 10.00 kΩ 500mA 96V 160V Output Current Setting with Constant Power. 10.53 kΩ 475mA 96V 168V 11.11 kΩ 450mA 96V 178V 11.76 kΩ 425mA 96V 188V 12.50 kΩ 400mA 100V 200V 13.33 kΩ 375mA 107V 213V 14.29 kΩ 350mA 115V 229V 15.38 kΩ 325mA 124V 229V Output Current Setting with Power Derating. 16.67 kΩ 300mA 134V 229V 18.18 kΩ 275mA 146V 229V 20.00 kΩ 250mA 160V 229V  LMT-080S070STF Resistor Setting (Iset) Output Current Output Voltage Range Notes Typ. Typ. Min. Max. / 7.14 kΩ 700mA 68V 114V Output Current Setting with Constant Power. 7.58 kΩ 660mA 68V 121V 8.06 kΩ 620mA 68V 129V 8.62 kΩ 580mA 69V 138V 9.26 kΩ 540mA 74V 148V 10.00 kΩ 500mA 80V 160V 10.87 kΩ 460mA 87V 160V Output Current Setting with Power Derating. 11.90 kΩ 420mA 96V 160V 13.16 kΩ 380mA 106V 160V 14.71 kΩ 340mA 118V 160V

Specifications are subject to changes without notice. 80W Non-isolated IP20 DriverLMT-080SxxxSTF Rev. A www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com  LMT-080S105STF Resistor Setting (Iset) Output Current Output Voltage Range Notes Typ. Typ. Min. Max. / 4.76 kΩ 1050mA 45V 76V Output Current Setting with Constant Power. 5.00 kΩ 1000mA 45V 80V 5.26 kΩ 950mA 45V 84V 5.56 kΩ 900mA 45V 89V 5.88 kΩ 850mA 47V 94V 6.25 kΩ 800mA 50V 100V 6.67 kΩ 750mA 54V 107V 7.14 kΩ 700mA 57V 114V 7.69 kΩ 650mA 62V 114V Output Current Setting with Power Derating. 8.33 kΩ 600mA 67V 114V 9.09 kΩ 550mA 73V 114V 10.00 kΩ 500mA 80V 114V Notes: 1. An external resistor must be set in the setting range as specified to insure the driver operates as expected. 2. Either short circuit or open circuit is not allowed for long-term operation. Mechanical Outline L(BLACK)N( WHI TE) PE( GREEN) LED+(RED)LED-(BLACK)LED+(RED)LED-(BLACK) Iset +( WHI TE)Iset-(BLACK) PROJ: Unspecified tolerance:±1 Tc

Specifications are subject to changes without notice. 80W Non-isolated IP20 DriverLMT-080SxxxSTF Rev. A www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com RoHS Compliance Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products.

Specifications are subject to changes without notice. 80W Non-isolated IP20 DriverLMT-080SxxxSTF Rev. A www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com

Revision History

Date Rev. Description of Change Item From To 2019-01-17 A Datasheets Release / /

Selected Specification

Inventronics Inc. LMT-080S050STF overview.

Summary

80W Non-isolated IP20 Driver Rev. A

Description

The LMT-080SxxxSTF series is a 80W, constant-current, IP20 LED driver that operates from 198-264 Vac input

Source title LMT-080S050STF Datasheet(PDF) - Inventronics Inc.

Related Parts

More parts from the same family.

Browse manufacturer