ESC-150SXXXDT INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 10
Technical content
Features
Description
The ESC-150SxxxDT(ST) series is a 150W, constant-current LED driver that operates from 249 ~ 528 Vac input with excellent power factor. It is created for many lighting applications including high bay, tunnel and roadway. The high efficiency of these drivers a nd compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Output Current (1) Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Power Factor Model Name 277Vac 480Vac 580 mA 249 ~ 528 Vac 129~257Vdc 150 W 91% 0.95 0.90 ESC-150S058DT(ST) 700 mA 249 ~ 528 Vac 107~214Vdc 150 W 91% 0.95 0.90 ESC-150S070DT(ST) 1050 mA 249 ~ 528 Vac 71~142Vdc 150 W 90% 0.95 0.90 ESC-150S105DT(ST) 1400 mA 249 ~ 528 Vac 53~107Vdc 150 W 90% 0.95 0.90 ESC-150S140DT(ST) (4) 2100 mA 249 ~ 528 Vac 36~71 Vdc 150 W 90% 0.95 0.90 ESC-150S210DT(ST) (4) 2800 mA 249 ~ 528 Vac 27~54 Vdc 150 W 90% 0.95 0.90 ESC-150S280DT(ST) (4) 3500 mA 249 ~ 528 Vac 21~43 Vdc 150 W 89% 0.95 0.90 ESC-150S350DT(ST) (4) 4200 mA 249 ~ 528 Vac 18~36 Vdc 150 W 89% 0.95 0.90 ESC-150S420DT(ST) (4) Notes: (1) The output current is adjustable at factory from 50% to 100%. (2) Certified input voltage range: 277-480Vac (3) Measured at 100% load and 277 Vac input. (4) SELV output Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 249 Vac - 528 Vac Input Frequency 47 Hz - 63 Hz Leakage Current - - 1 mA At 480Vac/60Hz input; grounding effectively /g120 High Efficiency (Up to 91%) /g120 Constant Current Output /g120 0-10V Dimming Control /g120 Input Surge Protection: 4kV line-line, 6kV line-earth /g120 All-Around Protection: OVP, SCP, OTP /g120 Waterproof (IP67) and UL Dry / Damp / Wet Location /g120 SELV Output /g120 TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ESC-150SxxxDT(ST) Rev. O Input Specifications (Continued) Parameter Min. Typ. Max. Notes Input AC Current - - 0.7 A Measured at 100% load and 277 Vac input. - - 0.42 A Measured at 100% load and 480 Vac input. Inrush Current(I2t) - - 1.5 A 2s At 480Vac input, 25ć cold start, duration=400 /g541s, 10%Ipk-10%Ipk. PF 0.90 - - At 277-480Vac, 50-60Hz, 75%-100% Load (112.5-150W) THD - - 20% At 347-480Vac, 50-60Hz, 75%-100% Load (112.5-150W) - - 30% At 277Vac, 50-60Hz, 75%-100% Load (112.5-150W) Output Specifications Parameter Min. Typ. Max. Notes Output Current Range -5% 5% Total Output Current Ripple (pk-pk) - 5%I O 10%IO At100% load condition, 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - 2%I O - At 100% load condition. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10%I O At 100% load condition. No load Output Voltage IO = 580 mA IO = 700 mA IO = 1050 mA IO = 1400 mA IO = 2100 mA IO = 2800 mA IO = 3500 mA IO = 4200 mA 270 V 225 V 155 V 120 V 85 V 65 V 50 V 42 V Line Regulation - - f1% Load Regulation - - f3% Turn-on Delay Time - - 1.0 s Measured at 277Vac and 480Vac input, 75%-10 0% Load Temperature coefficient - 0.03%//g113C - Case temperature = 0/g113C ~Tc max Note: All specifications are typical at 25 /g113C unless otherwise stated. Protection Functions Parameter Notes Over Temperature Protection Decreases output current, returning to normal after over temperature is removed. Short Circuit Protection No damage will occur when any output is sh ort circuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ESC-150SxxxDT(ST) Rev. O General Specifications Parameter Min. Typ. Max. Notes Efficiency at 277 Vac input: IO = 580 mA IO = 700 mA IO = 1050 mA IO = 1400 mA IO = 2100 mA IO = 2800 mA IO = 3500 mA IO = 4200 mA 90% 90% 89% 89% 89% 89% 88% 88% 91% 91% 90% 90% 90% 90% 89% 89% Measured at 100% load and steady-state temperature in 25/g113C ambient; (Efficiency will be about 1.0% lower if measured immediately after startup.) Efficiency at 480 Vac input: IO = 580 mA IO = 700 mA IO = 1050 mA IO = 1400 mA IO = 2100 mA IO = 2800 mA IO = 3500 mA IO = 4200 mA 89% 89% 88% 88% 88% 88% 87% 87% 90% 90% 89% 89% 89% 89% 88% 88% Measured at 100% load and steady-state temperature in 25/g113C ambient; (Efficiency will be about 1.0% lower if measured immediately after startup.) MTBF - 259,800 hours - Measured at 480Vac input, 80%Load and 25/g113C ambient temperature (MIL-HDBK-217F) Lifetime - 140,000 hours - Measured at 480Vac input, 80% load; Case temperature=60ć @ Tc point. See life time vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +85°C Operating Case Temperature for Warranty Tc_w -40°C - +75°C Storage Temperature -40 °C - +85 °C Humidity: 5% RH to 100% RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 7.40 × 3.70 × 1.71 188 × 93.9 × 43.5 With mounting ear 8.74 × 3.70 × 1.71 222 × 93.9 × 43.5 Net Weight - 1400 g - Note: All specifications are typical at 25 /g113C unless otherwise stated. Safety & EMC Compliance Safety Category Standard UL/CUL UL 8750, CAN/CSA-C22.2 No. 250.13 CE EN 61347-1,EN61347-2-13 EMI Standards Notes EN 55015(1) Conducted emission Test & Radiated emission Test EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker FCC Part 15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interference, and [2] this device must accept any interference received, including interference that may cause undesired Operation.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ESC-150SxxxDT(ST) Rev. O Safety & EMC Compliance (Continued) EMS Standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: line to line 4 kV, line to earth 6 KV EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Derating Curve Lifetime vs Case Temperature Curve
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ESC-150SxxxDT(ST) Rev. O Inrush Current Waveform Efficiency vs Load (580mA Model) Power Factor Characteristics
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ESC-150SxxxDT(ST) Rev. O Total Harmonic Distortion Dimming Control (On secondary side) Parameter Min. Typ. Max. Notes 12V output voltage 10.8 V 12 V 13.2 V 12V output source current 0 mA - 20 mA Absolute maximum voltage on the 0~10V input pin -20 V - 20 V Source current on 0~10V input pin 100 uA 140 uA 180 uA The dimmer control is operated from an input signal of 1 – 10 Vdc. Recommended implementations are provided below. Implementation 1: DC input
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ESC-150SxxxDT(ST) Rev. O Implementation 2: External resistor Notes: 1. Io is actual output current and Ir is rated current without dimming control. 2. For the driver to operate properly, the load voltage must be maintained above the minimum voltage threshold (approx. 50% of the max. output voltage for any given model). 3. If the output voltage is maintained above 50% of the maximum output voltage, the dimming control may be operated over the entire 1-10V range with output current varying from 10% to 100% of Ir. 4. The dimming signal is allowed to be less than 1V, however, when it for 0-1V, the output current is 10%Ir. 5. Do not connect the GND of dimming to the output; otherwise, the LED driver can not work normally. Mechanical Outline ESC-150SxxxDT Unspecified tolerance:±1 PROJ: AC/L (BLACK) AC/N (WHITE) GND (GREEN) INPUT(UL STW 3*18AWG 9.5) OUTPUT (UL SJTW 2*18AWG 7.3) V+ (RED) V- (BLUE) GRAY PURPLE BLACKK/WHITE DIMMING WIRE (UL21996 3*22AWG 5.0) Tc
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ESC-150SxxxDT(ST) Rev. O ESC-150SxxxST Unspecified tolerance:±1 PROJ: AC/L (BLACK) AC/N (WHITE) GND (GREEN) INPUT(UL STW 3*18AWG 9.5) OUTPUT (UL SJTW 2*18AWG 7.3) V+ (RED) V- (BLUE) Tc RoHS Compliance Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ESC-150SxxxDT(ST) Rev. O
Revision History
Date Rev. Description of Change Item From To 2011-10-10 A Datasheet Release / / 2011-10-11 B Derating Curve, Life time PF, EFF Curve / Update 2011-10-19 C Output Voltage at No Load IO = 700 mA IO = 2800 mA 220 V 60 V 225 V 65 V 2011-12-28 D Life Time / Update 2012-01-17 E ESC-150S210ST(DT) added / New model added 2012-06-05 F Notes of Life time / Updated Max Output Voltage of ESC-150S058DT 258 V 257 V 2012-07-17 G Max Case Temperature / Updated 2012-07-30 H Mechanical Outline-Wire diameter added / Updated Min PF be added in Input Specifications / / 2012-09-26 I Life time curve / Updated -14W max MTBF, Life time Typical / Added Temperature coefficient / Added Inrush Current (I2t) / Added 2013-12-19 J Mechanical Outline / Corrected 2014-09-18 K Inrush current / Deleted Inrush Current(I2t) 0.35A2s 1.5A 2s Inrush Current Waveform / Added 2015-11-09 L Format / Updated Features / Updated Description / Updated Input Specifications / Updated Output Specifications Total Output Current Ripple (pk-pk) Added Output Specifications Output Current Ripple at < 200 Hz (pk-pk) Added General Specifications Case Temperature Operating Case Temperature for Safety Tc_s General Specifications Operating Case Temperature for Warranty Tc_w Added Safety & EMC Compliance / Updated Protection Functions / Updated
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ESC-150SxxxDT(ST) Rev. O Revision History (Continued) Change Date Rev. Description of Change Item From To 2015-11-09 L Dimming Control (On secondary side) / Updated 2016-02-03 M THD / Updated Total Harmonic Distortion / Added 2017-07-26 N Features / Updated Input Specifications PF/THD Updated Output Specifications Turn-on Delay Time Updated Output Specifications Temperature coefficient Updated General Specifications Storage Temperature Added Dimensions With mounting ear Added Environmental Specifications / Deleted Safety & EMC Compliance / Updated Mechanical Outline / Updated 2019-03-13 O Description / Updated General Specifications - Net Weight 1300g 1400g