LTC-040SXXXDSP INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 9
Technical content
Features
Description
The LTC-040SxxxDSP(SSP) series operates from a 312 ~ 528 Vac input range. They are designed to be highly efficient and highly reliable. Features include dimming control, over voltage protection, short circuit protection, over load protection, and over temperature protection. Models Output Current Input Voltage Range(1) Output Voltage Range Max. Output Power Typical Efficiency (2) Power Factor Model Number 347Vac 480Vac 350 mA 312 ~ 528 Vac 57~114Vdc 40 W 89% 0.96 0.95 LTC-040S035DSP(SSP) (3) 530 mA 312 ~ 528 Vac 38~75 Vdc 40 W 89% 0.96 0.95 LTC-040S053DSP(SSP) (3) 700 mA 312 ~ 528 Vac 28~56 Vdc 39 W 88% 0.96 0.95 LTC-040S070DSP(SSP) (4) 1050 mA 312 ~ 528 Vac 19~38 Vdc 40 W 87% 0.96 0.95 LTC-040S105DSP(SSP) (4) 1400 mA 312 ~ 528 Vac 14~29 Vdc 40 W 86% 0.96 0.95 LTC-040S140DSP(SSP) (4) 1750 mA 312 ~ 528 Vac 11~23 Vdc 40 W 86% 0.96 0.95 LTC-040S175DSP(SSP) (4) 2100 mA 312 ~ 528 Vac 9~19 Vdc 40 W 86% 0.96 0.95 LTC-040S210DSP(SSP) (4) Notes: (1) UL, FCC certified input voltage range: 347-480Vac. (2) Measured at full load and 480 Vac input. (3) Non-Class 2 output (USR & CNR). (4) Class 2 output (USR & CNR) for Dry & Damp Location. Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 312 Vac - 528 Vac Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL8750; 480Vac/ 60Hz High Efficiency (Up to 89%) Ultra High Voltage Input Active Power Factor Correction (Typical 0.95) All-Around Protection: OVP, SCP and Open Lamp Protection 0-10V Dimmable Waterproof (IP66) and UL Dry / Damp Location Class 2 Output
Specifications are subject to changes without notice. 40W Constant Current IP66 Driver LTC-040SxxxDSP(SSP) Rev. C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications (Continued) Parameter Min. Typ. Max. Notes Input AC Current - - 0.17 A Measured at full load and 347 Vac input. - - 0.13 A Measured at full load and 480 Vac input. Inrush Current(I2t) - - 0.32 A 2s At 480Vac input 25℃ Cold Start. Duration=120 μs, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.9 - - 347-480Vac，75% -100%load (30~40W) THD - - 20% Output Specifications Parameter Min. Typ. Max. Notes Output Current Range -5%Io - 5%Io Output Voltage Ripple IO = 350 mA IO = 530 mA IO = 700 mA IO = 1050 mA IO = 1400 mA IO = 1750 mA IO = 2100 mA 6 V 5 V 5 V 4 V 3 V 3 V 2 V Load conditions, Measured by 20 MHz bandwidth oscilloscope and the output paralleled a 0.1 uF ceramic capacitor and a 10 uF electrolytic capacitor Output Current Overshoot / Undershoot - - 10%Io No Load Output Voltage IO = 350 mA IO = 530 mA IO = 700 mA IO = 1050 mA IO = 1400 mA IO = 1750 mA IO = 2100 mA 132V 90V 60V 42V 35V 28V 23V Line Regulation - - ±1.5% Measured at full load. Load Regulation - - ±3.0% Measured at full load. Turn-on Delay Time - 0.8 s 1.0 s Measured at 347Vac input. - 0.5 s 0.8 s Measured at 480Vac input. Temperature Coefficient of Iomax - 0.03%/C - Case temperature = 0C ~Tc max 12V Auxiliary Output Voltage 10.8 V 12 V 13.2 V 12V Auxiliary Output Source Current - - 20 mA Note: All specifications are typical at 25C unless otherwise stated.
Specifications are subject to changes without notice. 40W Constant Current IP66 Driver LTC-040SxxxDSP(SSP) Rev. C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications Parameter Min. Typ. Max. Notes Efficiency at 347 Vac input: IO = 350 mA IO = 530 mA IO = 700 mA IO = 1050 mA IO = 1400 mA IO = 1750 mA IO = 2100 mA 87% 87% 86% 85% 84% 84% 84% 89% 89% 88% 87% 86% 86% 86% Measured at full load and steady-state temperature in 25C ambient. Efficiency at 480 Vac input: IO = 350 mA IO = 530 mA IO = 700 mA IO = 1050 mA IO = 1400 mA IO = 1750 mA IO = 2100 mA 87% 87% 86% 85% 84% 84% 84% 89% 89% 88% 87% 86% 86% 86% Measured at full load and steady-state temperature in 25C ambient. Standby Power Dissipation - - 5 W MTBF - 459,000 Hours - Measured at 480Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 87,000 Hours - Measured at 480Vac input, 80%Load and 60C Case temperature. See lifetime vs. Tc curve for the details. Operating Case Temperature for Safety Tc_s -40 ℃ - +90 ℃ Operating Case Temperature for Warranty Tc_w -40 ℃ - +70 ℃ Humidity: 10% RH to 100% RH Storage Temperature -40 ℃ - +85 ℃ Humidity: 5% RH to 100% RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 3.74 × 2.76 × 1.26 95 × 70 × 32 Net Weight - 350 g - Note: All specifications are typical at 25C unless otherwise stated. Dimming Specifications Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the 0~10V Input Pin -20 V - 20 V Source Current on 0~10V Input Pin 0 uA 200 uA 250 uA Dimming Output Range 10%Iomax - 100%Iomax Recommended Dimming Input Range 0 V - 10 V
Specifications are subject to changes without notice. 40W Constant Current IP66 Driver LTC-040SxxxDSP(SSP) Rev. C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Safety & EMC Compliance Safety Category Standard EMI Standards Notes FCC Part 15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interference, and [2] this device must accept any interference received, including interference that may cause undesired operation. Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Lifetime vs. Case Temperature Inrush Current Waveform
Specifications are subject to changes without notice. 40W Constant Current IP66 Driver LTC-040SxxxDSP(SSP) Rev. C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Efficiency vs. Load LTC-040S035DSP(SSP) LTC-040S053DSP(SSP) LTC-040S070DSP(SSP) LTC-040S105DSP(SSP) LTC-040S140DSP(SSP) LTC-040S175DSP(SSP)
Specifications are subject to changes without notice. 40W Constant Current IP66 Driver LTC-040SxxxDSP(SSP) Rev. C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com LTC-040S210DSP(SSP) Power Factor Total Harmonic Distortion
Specifications are subject to changes without notice. 40W Constant Current IP66 Driver LTC-040SxxxDSP(SSP) Rev. C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Protection Functions Parameter Notes Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Short Circuit Protection Auto Recovery. No damage shall occur when any output operating in a short circuit condition. The power supply shall be self-recovery when the fault condition is removed. Over Temperature Protection Auto Recovery. Returning to normal after over temperature is removed. Dimming 0-10V Dimming The dimmer control may be operated from either a dimmer or from an input signal of 0 – 10 Vdc. The recommended implementation is provided below. Implementation 1: DC Input Implementation 2: External Resistor Notes: 1. Io is actual output current and Ir is rated current without dimming control. 2. Do not connect the Dim- to the V-; otherwise, the LED driver cannot work normally. 3. If 0-10V dimming is not used, Dim + can be either open or connected to Vaux.
Specifications are subject to changes without notice. 40W Constant Current IP66 Driver LTC-040SxxxDSP(SSP) Rev. C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Mechanical Outline LTC-040SxxxDSP LTC-040SxxxSSP Unspecified tolerance:±1 PROJ: YELLOW GRAY PURPLE DIMMING WIRE (UL1430 22AWG) (RED) (BLUE) AC/N (WHITE) AC/L (BLACK) OUTPUT (UL1015 18AWG) INPUT (UL1015 18AWG) Tc Unspecified tolerance:±1 PROJ: (RED) (BLUE) AC/N (WHITE) AC/L (BLACK) OUTPUT (UL1015 18AWG) INPUT (UL1015 18AWG) Tc RoHS Compliance Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. 40W Constant Current IP66 Driver LTC-040SxxxDSP(SSP) Rev. C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2013-10-12 A Datasheets Release / / 2015-08-19 B Operating Case Temperature for Warranty Tc_w / Added Environmental Specifications / Deleted 0-10V Dimming Implementation / Corrected Source Current on 0~10V Input Pin Max. 220 uA 250 uA 2017-07-13 C Mechanical Outline-Tc / Added