LBD-075SXXXBSF INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 11
Technical content
Features
Description
The LBD-075SxxxBSF series is a 75W, constant-current, programmable IP20 LED driver with DALI that operates from 176-305Vac input with excellent power factor. It is created for many lighting applications including panel and linear, etc, it provides good dimming accuracy down to 5% output, plus a dim-to-off mode with low standby power. The high efficiency of these drivers and slim metal case enable them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against output over voltage, short circuit, and over temperature of both the driver and the external LED array. Models Output Current Range Full-Power Current Range(1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Power Factor (3) Model Number(4) 35-1000mA 700-1000mA 700mA 176~305 Vac 21~107 Vdc 75 W 91.00% 0.96 LBD-075S100BSF 52.5-1500mA 1050-1500mA 1400mA 176~305 Vac 14~71 Vdc 75 W 90.00% 0.96 LBD-075S150BSF 73.5-2100mA 1470-2100mA 2100mA 176~305 Vac 10~51 Vdc 75 W 89.50% 0.96 LBD-075S210BSF Notes: (1) Output current range with constant power at 75W. (2) Certified input voltage range: 200-240Vac. (3) Measured at a 220Vac input with 70% maximum output current and 100% maximum output voltage. (4) SELV output. Dim-to-Off with Standby Power ≤ 0.5 W Always-On Auxiliary Power: 12 Vdc, 200 mA Thermal Sensing and Protection for LED Module Full Power at 70-100% Max Current (Constant Power) Flicker-Free DALI Dimming Control and Push Dimming Function Low Dimming Level to 5% Class II, SELV Suitable for Built-in Use DISCONTINUED
Specifications are subject to changes without notice. LBD-075SxxxBSF Rev. B 75W Programmable IP20 Driver with DALI www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com I-V Operating Curve Power-Limited Voltage-Limited Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 176 V - 305 V Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.70 mA IEC60598-1; 240Vac/ 60Hz Input AC Current - - 0.50 A Measured at 100% load and 220 Vac input. Inrush Current(I2t) - - 1.12 A2s At 220Vac input, 25C Cold Start, Duration =528μs, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.90 - - At 220-277Vac, 65%-100%load(48.8-75W) THD - - 20% THD - - 10% At 220-240Vac, 50-60Hz, 65%-100%load (48.8-75W) Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset At 100% load condition Output Current Setting(Ioset) Range 7%Iomax - 100%Iomax Output Current Setting Range with Constant Power 70%Iomax - 100%Iomax Total Output Current Ripple (pk-pk) - - 10%Iomax At 100% load condition, 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - - 5%Iomax At 100% load condition. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10 %Iomax At 100% load condition DISCONTINUED
Specifications are subject to changes without notice. LBD-075SxxxBSF Rev. B 75W Programmable IP20 Driver with DALI www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Output Specifications (Continued) Parameter Min. Typ. Max. Notes No Load Output Voltage LBD-075S100BSF LBD-075S150BSF LBD-075S210BSF 120 V 80 V 60 V Line Regulation - - ±0.5% Measured at 100% load Load Regulation - - ±1.5% Turn-on Delay Time - 0.3 s 0.5 s Measured at 220Vac input, 65%-100%load Temperature Coefficient of Ioset - 0.02%/C - Case temperature = 0C ~Tc max 12V Auxiliary Output Voltage 10.8 V 12 V 13.2 V 12V Auxiliary Output Source Current 0 mA - 200 mA Return terminal is “Return− “ Note: All specifications are typical at 25C unless otherwise stated. General Specifications Parameter Min. Typ. Max. Notes Efficiency at 220 Vac input: LBD-075S100BSF Io=700 mA Io=1000 mA LBD-075S150BSF Io=1050 mA Io=1500 mA LBD-075S210BSF Io=1470 mA Io=2100 mA 89.0% 88.5% 88.0% 87.5% 87.5% 87.0% 91.00% 90.50% 90.00% 89.50% 89.50% 89.00% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Standby Power - - 0.5 W Measured at 230Vac/50Hz; Dimming off MTBF - 203,000 Hours - Measured at 220Vac input, 80%Load and 25C ambient temperature (MIL-HDBK-217F) Lifetime - 89,000 Hours - Measured at 220Vac input, 80%Load and 70C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -30 °C - +87 °C Operating Case Temperature for Warranty Tc_w -30 °C - +75 °C Humidity: 10% RH to 90% RH; No Condensation. Storage Temperature -30 °C - +85 °C Humidity: 5% RH to 90% RH. Dimensions Inches (L × W × H) Millimeters (L × W ×H) 378 × 30 × 21 Net Weight - 360 g - Note: All specifications are typical at 25C unless otherwise stated. DISCONTINUED
Specifications are subject to changes without notice. LBD-075SxxxBSF Rev. B 75W Programmable IP20 Driver with DALI www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dimming Specifications Parameter Min. Typ. Max. Notes DA1,DA2 High Level 9.5V 16V 22.5V DA1,DA2 Low Level -6.5V 0V 6.5V DA1,DA2 Current 0mA - 2mA Dimming Output Range 5%Ioset - Ioset 70%Iomax ≤ Ioset ≤ 100%Iomax 3.5%Iomax - Ioset 3.5%Iomax ≤ Ioset < 70%Iomax Note: All specifications are typical at 25 C unless stated otherwise. Standards Compliance Safety Category Standard ENEC & TUV & CE EN 61347-1 (1), EN61347-2-13 CB IEC 61347-1, IEC 61347-2-13 KS KS C 7655 EMI Standards Notes EN 55015(2) Conducted emission Test &Radiated emission Test EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage Fluctuations & Flicker EMS Standards Notes EN 61000-4-2 Electrostatic Discharge(ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: Differential Mode 1 kV EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies to Lighting Equipment DALI Standards Notes DALI IEC62386-101,102 & part of 207(3) DISCONTINUED
Specifications are subject to changes without notice. LBD-075SxxxBSF Rev. B 75W Programmable IP20 Driver with DALI www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Notes: (1) This product meets all requirements for EN=61347-1, A2:2013 Annex O (Double insulation). When the driver is energized, the allowed leakage current is perceptible but harmless. (2) This LED driver meets the EMI spec ifications above, but EM I performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. (3) Optional Commands Implemented: 242 (query short circuit), 243 (query open circuit). Lifetime vs. Case Temperature Inrush Current Waveform DISCONTINUED
Specifications are subject to changes without notice. LBD-075SxxxBSF Rev. B 75W Programmable IP20 Driver with DALI www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Efficiency vs. Load LBD-075S100BSF(Io=700mA) LBD-075S100BSF(Io=1000mA) LBD-075S150BSF(Io=1050mA) LBD-075S150BSF(Io=1500mA) LBD-075S210BSF(Io=1470mA) LBD-075S210BSF(Io=2100mA) DISCONTINUED
Specifications are subject to changes without notice. LBD-075SxxxBSF Rev. B 75W Programmable IP20 Driver with DALI www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Power Factor Total Harmonic Distortion Protection Functions Parameter Min. Typ. Max. Notes Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Short Circuit Protection Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Temperature Protection Decreases output current. Returning to normal after over temperature is removed. External Thermal Protection NTC R1 - 7.81 kOhm - When R_NTC falls below R1, External Thermal Protection is triggered, reducing output current linearly until R2 is reached. R2 4.16 kOhm When R_NTC is less than R2, output current is reduced to the programmed “Protection Current Floor.” Protection Current Floor 10%Ioset 60%Ioset 100%Ioset 10%Ioset > Iomin (default setting is 60%) Iomin 60%Ioset 100%Ioset 10%Ioset ≤ Iomin (default setting is 60%) DISCONTINUED
Specifications are subject to changes without notice. LBD-075SxxxBSF Rev. B 75W Programmable IP20 Driver with DALI www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dimming DALI Dimming The recommended implementation of the dimming control is provided below. Implementation: DALI Dimming Push Dimming Parameter Min. Typ. Max. Notes Operated Input Voltage Range 176 V - 264 V Dimming Output Range 5%Ioset - Ioset 70%Iomax ≤ Ioset ≤ 100%Iomax 3.5%Iomax - Ioset 3.5%Iomax ≤ Ioset < 70%Iomax Short push 0.1 s - 0.6 s Switch the device on or off Long push 0.6 s - 3.6 s Dim the device up or down 1% every 32ms(Default) Long push 0.6 s - 6.6 s Dim the device up or down 1% every 64ms Long push 10 s - - All devices will be synchronized to the same status 100% Long push 20 s - - Change the fading time between 3s and 6s DISCONTINUED
Specifications are subject to changes without notice. LBD-075SxxxBSF Rev. B 75W Programmable IP20 Driver with DALI www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Notes: 1. Automatically identify DALI mode or push dimming mo de, push dimming and DALI function can’t be used at the same time. 2. The device has a memory function. This is used, among ot her things, for storing the last dimming value in the event of interruptions in the power supply. When power returns, the LED is automatically restored to its previous operating state and dimmed to the last value. Wire Connection Diagram DALI Dimming L N RX TX Tmon +12V Return Vout+ Vout- AC INPUT DA/P DA/P L N DALI Control NTCLoad(Max.200mA) LED Load Push Dimming L N RX TX Tmon +12V Return Vout+ Vout- AC INPUT DA/P DA/P L N NTCLoad(Max.200mA) LED Load Programming Connection Diagram Note: The driver needs to be powered on during the programming process in this way. DISCONTINUED
Specifications are subject to changes without notice. LBD-075SxxxBSF Rev. B 75W Programmable IP20 Driver with DALI www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Note: The driver does not need to be powered on but needs a programming fixture during the programming process in this way. Please refer toPRG-MUL2 (Programmer) and PRG-FIX-FP (Programming Fixture) datasheets for details. Mechanical Outline L N RX TX Tmon +12V Return Vout+ Vout- Unspecified tolerance:±1 PROJ: AC INPUT DC OUTPUT Da/P Da/P Tc RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products. DISCONTINUED
Specifications are subject to changes without notice. LBD-075SxxxBSF Rev. B 75W Programmable IP20 Driver with DALI www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2016-08-25 A Datasheet Release / / 2019-08-20 B TUV Logo / Updated ENEC Logo / Updated Description / Updated Safety &EMC Compliance ENEC Added Safety &EMC Compliance TUV Added Safety &EMC Compliance CB Added Safety &EMC Compliance KS Updated Safety &EMC Compliance EN 61000-3-2 Updated Safety &EMC Compliance EN 61000-4-5 Updated RoHS Compliance / Updated DISCONTINUED