EUW-040DXXXDX INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 16
Technical content
Features
Description
The EUW-040DxxxDx series is a 40W, constant-current, programmable IP66/IP67 LED driver that operates from 90-305Vac input with excellent power factor. Created to enhance tunnel, low bay, signage, or wall pack type applications by offering a simplified white color tuning solution. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input su rge, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range (1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Typical Power Factor Model Number (4) 120Vac 220Vac 7-1050mA 700-1050mA 700 mA 90~305 Vac/ 127~300 Vdc 20~58 Vdc 40W 88.5% 0.99 0.96 EUW-040D105Dx (5) Notes: (1) Output current range with constant power at 40W (2) Certified input voltage range: UL, FCC 100-277Vac; otherwise 100-240Vac (3) Measured at 100% load and 220Vac input (see below “General Specifications” for details) (4) SELV Output (5) x = V is CCC and CE model; x = F is UL Recognized model Adjust Color Temperature Continuously Adjust Intensity and Color Temperature Separately 40W Max Each Channel with Total 40W Load 1% Min Each Channel with Total 10% Min Dimming Full Power at Wide Output Cur rent Range (Constant Power) Adjustable Output Current (AOC) with Programmability Isolated 1-5V/1-10V/10V PWM/3-Timer-Modes Dimmable Flicker Free Output Lumen Compensation Input Surge Protection: DM 4kV, CM 6kV All-Around Protection: OVP, SCP, OTP IP66/IP67 (DV model) IP66 and UL Dry/Damp Location (DF model) SELV Output TYPE HL, for Use in a Class I, Division 2 Hazardous (Classified) Location 5 Years Warranty
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com I-V Operation Area (525,58)(7,58) 0 210 420 630 840 1050 1260 Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area (700,58) (1050,38) Programmed Operating Area 100%Load 75%Load (1050,28.5) (1%Ioset,40/Ioset) Note: 700mA≤Ioset≤1050mA (Ioset,40/Ioset) Input Specifications Parameter Min. Typ. Max. Notes Input AC Voltage 90 Vac - 305 Vac Input DC Voltage 127 Vdc - 300 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL 8750; 277Vac/ 60Hz - - 0.70 mA IEC 60598-1; 240Vac/ 60Hz Input AC Current - - 0.42 A Measured at 100% load and 120 Vac input. - - 0.23 A Measured at 100% load and 220 Vac input. Inrush Current(I2t) - - 0.02 A 2s At 220Vac input, 25C cold start, duration=1.32 μs, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.9 - - At 100-277Vac, 50-60Hz, 75%-100% Load THD - - 10% At 220-240Vac, 50-60Hz, 75%-100% Load (30-40W) Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset At 100% load condition Output Current Setting(Ioset) Range EUW-040D105Dx 7 mA 1050 mA Output Current Setting Range with Constant Power EUW-040D105Dx 700 mA 1050 mA
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Output Specifications (Continued) Parameter Min. Typ. Max. Notes Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax At 100% load condition. 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - 2%Iomax - At 100% load condition. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10%Iomax At 100% load condition No Load Output Voltage EUW-040S105Dx 100 V Line Regulation - - ±1% Measured at 100% load Load Regulation - - ±5% Turn-on Delay Time - - 0.5 s Measured at 120-277Vac input, 75%-100% Load Temperature Coefficient of Ioset - 0.06%/C - Case temperature = 0C ~Tc max General Specifications Parameter Min. Typ. Max. Notes Efficiency at 120 Vac input: EUW-040S105Dx Io= 700 mA Io=1050 mA 85.0% 83.0% 87.5% 85.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 220 Vac input: EUW-040S105Dx Io= 700 mA Io=1050 mA 86.5% 83.5% 88.5% 85.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 277 Vac input: EUW-040S105Dx Io= 700 mA Io=1050 mA 86.0% 83.0% 88.0% 85.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) MTBF - 657,000 Hours - Measured at 220Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 120,000 Hours - Measured at 220Vac input, 80%Load and 70C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90°C Operating Case Temperature for Warranty Tc_w -40°C - +80C Case temperature for 5 years warranty Humidity: 10%RH to 95%RH Storage Temperature -40°C - + 85°C Humidity: 5%RH to 95%RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 4.92 × 2.52 × 1.44 125 × 64 × 36.5 With mounting ear 5.59 × 2.52 × 1.44 142 × 64 × 36.5 Net Weight - 612 g -
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dimming Specifications Notes: (1) I1 current flows between V+ and V1-; (2) I2 current flows between V+ and V2-. Safety &EMC Compliance Safety Category Standard UL/CUL UL 8750,CAN/C SA-C22.2 No. 250.13 CCC GB 19510.1, GB 19510.14 CE EN 61347-1, EN 61347-2-13 Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 80 uA 130 uA 180 uA Vdim(+) = 0 V , Dimming Output Range EUW-040S105Dx 1%Ioset - Ioset 700 mA ≤ Ioset ≤ 1050 mA EUW-040S105Dx 7 mA - Ioset 7 mA ≤ Ioset ＜ 700 mA Recommended Dimming Range for 1-5V 0.25 V - 4.75 V Dimming mode set to 1-5V in Inventronics Programing Software.. CCT Range for 0-5V 0 - 5 CCT:I1 off Voltage 4.35 4.5 4.65 CCT:I1 on Voltage 4.15 4.3 4.45 CCT:I2 off Voltage 0.35 0.5 0.65 CCT:I2 on Voltage 0.55 0.7 0.85 Recommended Dimming Range for 1-10V 1 V - 9 V Default 1-10V dimming mode with positive logic. CCT Range for 0-10V 0 - 9V CCT:I1 off Voltage 8.35 8.5 8.65 CCT:I1 on Voltage 8.15 8.3 8.45 CCT:I2 off Voltage 0.35 0.5 0.65 CCT:I2 on Voltage 0.55 0.7 0.85 PWM_in High Level - - 10V PWM_in Low Level - 0V - PWM_in Frequency Range 200 Hz - 2 KHz PWM_in Duty Cycle 0% - 100% CCT:I1 off Voltage 83% 85% 87% CCT:I1 on Voltage 81% 83% 85% CCT:I2 off Voltage 3% 5% 7% CCT:I2 on Voltage 5% 7% 9%
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Safety &EMC Compliance (Continued) EMI Standards Notes EN IEC 55015/GB/T 17743(1) Conducted emission Test &Radiated emission Test EN IEC 61000-3-2/GB/T 17625.1 Harmonic current emissions EN 61000-3-3 Voltage fl uctuations & flicker FCC Part 15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation i s subject to the following two conditions: [1] this device may not cause harmful interference, and [2] this device must accept any interference received, including in terference that may cause undesired Operation. EMS Standards Notes EN 61000-4-2 Electrostatic Dischar ge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Elec tromagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: Differential Mode 4 kV, Common Mode 6 kV EN 61000-4-6 Conducted Radio Fr equency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Derating
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Lifetime vs. Case Temperature Inrush Current Waveform Efficiency vs. Load EUW-040DxxxDx(lo=700mA) EUW-040DxxxDx(lo=1050mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Power Factor Total Harmonic Distortion Protection Functions Parameter Notes Over Temperature Protection Decreases output current, returning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dimming 1-5V Dimming The recommended implementation of the dimming control is provided below which shows total output current in dimming voltage related diagram and I1(black), I2(blue) distribution in CCT voltage related diagram based on full power. Implementation 1: Positive logic
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Implementation 2: Negative logic Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. The dimmer can also be replac ed by an active 1-5V voltage source signal or passive components like zener. 3. When 1-5V negative logic dimming mode and Dim+ is open, the driver will output maximum current.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 1-10V Dimming The recommended implementation of the dimming control is provided below which shows total output current in dimming voltage related diagram and I1(black),I2(blue) distribution in CCT voltage related diagram based on full power . Implementation 3: Positive logic
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Implementation 4: Negative logic Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. The dimmer can also be replac ed by an active 1-10V voltage source signal or passive components like zener. 3. When 1-10V negative logic di mming mode and Dim+ is open, the driver will output maximum current.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 10V PWM Dimming The recommended implementation of the dimming control is provided below which shows total output current in PWM duty cycle related diagram and I1(black),I2(blue) distribution in CCT voltage related diagram based on full power . Implementation 5: Positive logic
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Implementation 6: Negative logic Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. When 10V PWM negativ e logic dimming mode and Dim+ is open, the driver will output maximum current. Dim/CCT Time Dimming Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self Adapting- Percentage and Traditional Timer. Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two days (if difference <15 minutes), assuming that the center point of the dimming curve is midnight local time. Self Adapting-Percentage: Automatically adjusts the on-time of each step by a constant percentage = (actual on-time for the past 2 days if difference <15 min) / (programmed on-time from the dimming curve). Traditional Timer: Follows the programmed timing curve after power on with no changes. Output Lumen Compensation Output Lumen Compensation (OLC) may be used to maintain constant light output over the life of the LEDs by driving them at a reduced current when new, then gradually i ncreasing the drive current over time to counteract LED lumen degradation.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Programming Connection Diagram Note: The driver does not need to be powered on during the programming process. Please refer to PRG-MUL2 (Programmer) datasheet for details. Mechanical Outline EUW-040DxxxDV Unspecified tolerance:±1 PROJ: INPUT(VDE H05RN-F 3*1.0mm2 7.2) OUTPUT(VDE H05RN-F 3*1.0mm2 7.2) V+(BRN) V1-(BLK) V2-(BLU) DIMMING(UL21996 22AWG/3C 5.0) Tc CCT(BLK/WHT) Dim+(PUR) Dim-(PNK) L (BRN) N (BLU) (YLW/GRN)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUW-040DxxxDF Unspecified tolerance:±1 PROJ: INPUT(UL1015 18AWG) OUTPUT(UL1015 18AWG) Tc DIMMING(UL1430 22AWG) L (BLK) N (WHT) (YLW/GRN) V+ (RED) V1- (BLK) V2- (BLU) CCT (BLK/WHT) Dim+ (PUR) Dim- (PNK) RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 40W Programmable IP66/IP67 Tunable White Driver EUW-040DxxxDx Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2021-08-06 A Datasheet Release / / 2023-07-21 B Product Photograph / Updated Safety &EMC Compliance / Updated Dimming / Updated Programming Connection Diagram / Updated Mechanical Outline / Updated