EUV-150SXXXDVASVA INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 11
Technical content
Features
Description
The EUV-150SxxxDVA(SVA) series is a 150W, constant-voltage IP67 LED driver that operates from 90-305 Vac input with excellent power factor. It is created for many lighting applications including LED strip, architectural, decorative and signage. The high efficiency of the driver and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, over current, output over voltage, over temperature, and short circuit. Models Output Voltage Input Voltage Range (1) Output Current Range Max. Output Power Typical Efficiency (2) Typical Power Factor Model Number (3) 120Vac 220Vac
12 V 90~305 Vac
127~250 Vdc 0 ~ 12.5 A 150 W 90.0% 0.99 0.96 EUV-150S012DVA(SVA)
24 V 90~305 Vac
127~250 Vdc 0 ~ 6.25 A 150 W 90.5% 0.99 0.96 EUV-150S024DVA(SVA) Notes: (1) Certified input Voltage range: 100-240Vac or 127-250Vdc (except CCC and KS). (2) Measured at 100% load and 220Vac input (see below “General Specifications” for details). (3) SELV output. Input Specifications Parameter Min. Typ. Max. Notes Input AC Voltage 90 Vac - 305 Vac Input DC Voltage 127 Vdc - 250 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.70 mA IEC 60598-1; 240Vac/60Hz Input AC Current - - 1.6 A Measured at 100% load and 120Vac input. - - 0.9 A Measured at 100% load and 220Vac input. High Efficiency (Up to 90.5%) Isolated 0-10V Dimmable (DVA models) Non-Dimmable (SVA models) Deep Dimming down to 0.1% Constant Voltage PWM Output Frequency up to 1.5kHz Dim-to-Off with Standby Power ≤ 0.5 W Input Surge Protection: DM 4kV, CM 6kV All-Around Protection: OCP, OVP, SCP, OTP IP67 SELV Output 5 Years Warranty
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 150W Constant Voltage IP67 Driver EUV-150SxxxDVA(SVA) Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications (Continued) Parameter Min. Typ. Max. Notes Inrush Current(I2t) - - 2.56 A 2s At 220Vac input, 25C cold start, duration=760 μs, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.90 - - At 100-240Vac, 50-60Hz, 60%-100% load THD - - 10% At 220-240Vac, 50-60Hz, 75%-100% load (112.5-150W) Output Specifications Parameter Min. Typ. Max. Notes Output Voltage Tolerance -2.5%Vo - 2.5%Vo At 100% load condition Output Voltage EUV-150S012DVA(SVA) EUV-150S024DVA(SVA) 12.5 V 24.2 V At 100% load condition Total Output Voltage Ripple (pk-pk) - - 2%Vo Measured by 20 MHz bandwidth oscillo- scope and the output paralleled a 0.1 uF ceramic capacitor and a 10 uF electrolytic capacitor. Startup Overshoot/ Undershoot - - 5%Vo At 100% load condition Line Regulation - - ±0.5% Measured at 100% load Load Regulation - - ±1.5% Turn-on Delay Time - - 1.0 s Measured at 120Vac input, 60%-100% load - - 0.5 s Measured at 220Vac input, 60%-100% load Hold up Time - 15 ms - Measured at 220Vac input, 100%load Load Dynamic Response Output Deviation - - 5%Vo R/S: 1A/μs Load: 25% ~ 75% load Settling Time - - 10 ms Temperature Coefficient of Vo - 0.03%/C - Case temperature = 0C~Tc max General Specifications Parameter Min. Typ. Max. Notes Efficiency at 120Vac input: EUV-150S012DVA(SVA) EUV-150S024DVA(SVA) 85.5% 85.5% 87.5% 87.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 150W Constant Voltage IP67 Driver EUV-150SxxxDVA(SVA) Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes Efficiency at 220Vac input: EUV-150S012DVA(SVA) EUV-150S024DVA(SVA) 88.0% 88.5% 90.0% 90.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 277Vac input: EUV-150S012DVA(SVA) EUV-150S024DVA(SVA) 88.5% 88.5% 90.5% 90.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Standby Power - - 0.5 W Measured at 230Vac/50Hz; Dimming off MTBF - 258,000 Hours - Measured at 220Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 89,000 Hours - Measured at 220Vac input, 80%load and 70C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90°C Operating Case Temperature for Warranty Tc_w -40°C - +75C Case temperature for 5 years warranty Storage Temperature -40°C - +85°C Humidity: 5%RH to 100%RH Dimensions Inches (L × W × H) Millimeters ((L × W × H) 7.08 x 2.66 x 1.44 180 x 67.5 x 36.5 With mounting ear 7.91 x 2.66 x 1.44 201 x 67.5 x 36.5 Net Weight - 950 g - Dimming Specifications Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 135 μA 150 μA 165 μA Vdim(+) = 0 V Dimming Output Range 0.1% - 100% Recommended Dimming Input Range 0 V - 10 V Dim off Voltage 0.35 V 0.5 V 0.65 V Dim on Voltage 0.55 V 0.7 V 0.85 V Hysteresis - 0.2 V -
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 150W Constant Voltage IP67 Driver EUV-150SxxxDVA(SVA) Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dimming Principle for PWM Style Output Output DC current Io = 0A ON OFF TON T Duty cycle (%) = TON T 100 % Note: Dimming is achieved by varying the duty cycle of the output current when driving LED strips. Safety & EMC Compliance Safety Category Standard ENEC & CE EN 61347-1, EN 61347-2-13 CB IEC 61347-1, IEC 61347-2-13 CCC GB 19510.1, GB 19510.14 KS KS C 7655 EMI Standards Notes EN IEC 55015/GB/T 17743(1) Conducted emission Test &Radiated emission Test EN IEC 61000-3-2/GB 17625.1 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker EMS Standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: Differential Mode 4 kV, Common Mode 6 kV EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Parameter Min. Typ. Max. Notes Output PWM frequency - 0 Hz - Vdim(+) =9.0-10.0 V - 1.5 kHz - Vdim(+) =1.4-9.0 V 300 Hz - 1.5 kHz Vdim(+) = 1.0-1.4 V
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 150W Constant Voltage IP67 Driver EUV-150SxxxDVA(SVA) Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Derating Lifetime vs. Case Temperature
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 150W Constant Voltage IP67 Driver EUV-150SxxxDVA(SVA) Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Inrush Current Waveform Efficiency vs. Load EUV-150S012DVA(SVA) EUV-150S024DVA(SVA) Power Factor
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 150W Constant Voltage IP67 Driver EUV-150SxxxDVA(SVA) Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Total Harmonic Distortion Protection Functions Parameter Notes Over Current Protection Auto Recovery. The driver shall be self-recovery when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Short Circuit Protection Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Temperature Protection Auto Recovery. Returnin g to normal after over temperature is removed. Dimming 0-10V Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Dimmer Inventronics LED Driver L N G Vac Implementation 1: DC Input
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 150W Constant Voltage IP67 Driver EUV-150SxxxDVA(SVA) Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Notes: 1. Do NOT connect Dim − to the output V− or V+, otherwise the driver will not work properly. 2. The dimmer can also be replaced by an active 0-10V vo ltage source signal or passive components like resistors and zener. 3. When 0-10V negative logic dimming mode and Dim+ is open, the driver will dim to off and be standby. Resister Dimming Dim+ Dim- Inventronics LED Driver L G N Vac Rx Implementation 2: External Resistor Mechanical Outline EUV-150S012DVA GRAY Unspecified tolerance:±1 PROJ: INPUT (VDE H05RN-F 3*1.0mm2 7.2) DIMMING WIRE (VDE 2*0.5mm2 6.3) OUTPUT (VDE H07RN-F 2*1.5mm2 9.4) AC/L(BROWN) AC/N(BLUE) GND(YELLOW/GREEN) V+(BROWN) V-(BLUE) PURPLE Tc
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 150W Constant Voltage IP67 Driver EUV-150SxxxDVA(SVA) Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUV-150S024DVA GRAY Unspecified tolerance:±1 PROJ: INPUT (VDE H05RN-F 3*1.0mm 2 7.2) DIMMING WIRE (VDE 2*0.5mm 2 6.3) OUTPUT (VDE H05RN-F 2*1mm 2 6.8) AC/L(BROWN) AC/N(BLUE) GND(YELLOW/GREEN) V+(BROWN) V-(BLUE) PURPLE Tc EUV-150S012SVA Unspecified tolerance:±1 PROJ: INPUT (VDE H05RN-F 3*1.0mm2 7.2) OUTPUT (VDE H07RN-F 2*1.5mm2 9.4) AC/L(BROWN) AC/N(BLUE) GND(YELLOW/GREEN) V+(BROWN) V-(BLUE) Tc
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 150W Constant Voltage IP67 Driver EUV-150SxxxDVA(SVA) Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUV-150S024SVA Unspecified tolerance:±1 PROJ: INPUT (VDE H05RN-F 3*1.0mm2 7.2) OUTPUT (VDE H05RN-F 2*1mm2 6.8) AC/L(BROWN) AC/N(BLUE) GND(YELLOW/GREEN) V+(BROWN) V-(BLUE) Tc RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 150W Constant Voltage IP67 Driver EUV-150SxxxDVA(SVA) Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2018-02-05 A Datasheet Release / / 2018-03-09 B Features / Updated Note of Dimming Specifications - Dimming Output Range / Deleted 2018-07-12 C ENEC Certificate / Added 2023-08-30 D Product Photograph / Updated TUV logo / Deleted Independent logo / Added CCC logo / Updated Features / Updated Safety &EMC Compliance / Updated Dimming / Updated RoHS Compliance / Updated