EUR-096SXXXDT INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 15
Technical content
Features
Description
The EUR-096SxxxDT(ST) series is a 96W, constant -current, AOC LED driver that operates from 90-305 Vac input with excellent power factor. It is desig ned in round shape and specially c reated for bay lighting. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life . To ensure trouble -free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range (1) Default Output Current Input Voltage Range (2) Output Voltage Range Max. Output Power Typical Efficiency (3) Power Factor Model Number 120Vac 220Vac 140-2100mA 1400-2100mA 2000mA 90~305 Vac/ 127~300 Vdc 24 ~ 69Vdc 96 W 91.5% 0.99 0.96 EUR-096S210DT(4) 1400-2100mA 1400-2100mA 2000mA 90~305 Vac/ 127~300 Vdc 24 ~ 69Vdc 96 W 91.5% 0.99 0.96 EUR-096S210ST(4) 175-2150mA 1750-2150mA 2000mA 90~305 Vac/ 127~300 Vdc 24 ~ 55Vdc 96 W 92.0% 0.99 0.96 EUR-096S215DT(5) 245-3500mA 2450-3500mA 2700mA 90~305 Vac/ 127~300 Vdc 14 ~ 39Vdc 96 W 91.0% 0.99 0.96 EUR-096S350DT(5) 2450-3500mA 2450-3500mA 2700mA 90~305 Vac/ 127~300 Vdc 14 ~ 39Vdc 96 W 91.0% 0.99 0.96 EUR-096S350ST(5) Notes: (1) Output current range with constant power at 96W (2) Certified input voltage range: UL, FCC 100-277Vac or 127-300Vdc; otherwise 100-240Vac or 127-250Vdc (except KS). (3) Measured at 100%load and 220Vac input (see below “General Specifications” for details). (4) SELV Output. (5) Class 2 & SELV Output. Inventronics patented metal case (Patent NO.: 201530552642.8) High Efficiency (Up to 92%) Full Power at Wide Output Current Range (Constant Power) Adjustable Output Current (AOC) with Potentiometer (ST models) Adjustable Output Current (AOC) with Programmability (DT models) 0-10V/PWM Dimmable (Only DT models) Input Surge Protection: 4kV line-line, 4kV line-earth All-Around Protection: OVP, SCP, OTP Waterproof (IP65) and UL Dry / Damp / Wet Location Class 2 & SELV Output TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location 5 Years Warranty
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com I-V Operation Area EUR-096S210DT EUR-096S210ST (980,69)(140,69) (2100,32) 0 400 800 1200 1600 2000 2400 Output Voltage(V) (1400,69) (2100,46) (10%Ioset,96/Ioset) (Ioset,96/Ioset) 100%Load 70%Load Good Performance Area Allowed Operating Area (2100,24) Programmed Operating Area (210,24) (Ioset,24) Output Current (mA) Note: 1400mA≤Ioset≤2100mA (2100,32) 1200 1380 1560 1740 1920 2100 2280 Output Voltage(V) (1400,69) (2100,46) 100%Load 70%Load Good Performance Area Allowed Operating Area (2100,24) Output Current (mA) Note: 1400mA≤Ioset≤2100mA (1400,48) (1400,24) EUR-096S215DT (1225,55)(175,55) (2150,31) 0 400 800 1200 1600 2000 2400 Output Voltage(V) (1750,55) (2150,44.5) (10%Ioset,96/Ioset) (Ioset,96/Ioset) 100%Load 70%Load Good Performance Area Allowed Operating Area (2150,24) Programmed Operating Area (215,24) (Ioset,24) Output Current (mA) Note: 1750mA≤Ioset≤2150mA EUR-096S350DT EUR-096S350ST (1715,39)(245,39) (3500,19) 0 700 1400 2100 2800 3500 4200 Output Voltage(V) (2450,39) (3500,27.5) (10%Ioset,96/Ioset) (Ioset,96/Ioset) 100%Load 70%Load Good Performance Area Allowed Operating Area (3500,14) Programmed Operating Area (350,14) (Ioset,14) Output Current (mA) Note: 2450mA≤Ioset≤3500mA (2450,27) (3500,19) 2000 2300 2600 2900 3200 3500 3800 Output Voltage(V) (2450,39) (3500,27.5) 100%Load 70%Load Good Performance Area Allowed Operating Area (3500,14) Output Current (mA) Note: 2450mA≤Ioset≤3500mA (2450,14)
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 90 Vac - 305 Vac 127~30 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL8750; 277Vac/ 60Hz - - 0.70 mA IEC60598-1; 240Vac/ 60Hz Input AC Current - - 1.32 A Measured at 100%load and 100Vac input. - - 0.60 A Measured at 100%load and 220Vac input. Inrush Current(I2t) - - 1.60 A2s At 220Vac input, 25C cold start, duration=760 μs, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.90 - - At 100-277Vac, 50-60Hz, 70%-100% Load THD - - 10% At 220-240Vac, 50-60Hz, 75%-100% Load (72-96W) Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset 100%load Output Current Setting(Ioset) Range EUR-096S210DT EUR-096S210ST EUR-096S215DT EUR-096S350DT EUR-096S350ST 140 mA 1400 mA 175 mA 245 mA 2450 mA 2100 mA 2100 mA 2150 mA 3500 mA 3500 mA Output Current Setting Range with Constant Power EUR-096S210DT EUR-096S210ST EUR-096S215DT EUR-096S350DT EUR-096S350ST 1400 mA 1400 mA 1750 mA 2450 mA 2450 mA 2100 mA 2100 mA 2150 mA 3500 mA 3500 mA Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax 100%load. 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - 2%Iomax - 100%load Startup Overshoot Current - - 10%Iomax 100%load No Load Output Voltage EUR-096S210DT/ST EUR-096S215DT EUR-096S350DT/ST 90 V 59 V 50 V Line Regulation - - ±0.5% 100%load
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Output Specifications (Continued) Parameter Min. Typ. Max. Notes Load Regulation - - ±1.5% Turn-on Delay Time - - 1.0 s Measured at 120Vac input, 70%-100% Load - - 0.5 s Measured at 220Vac input, 70%-100% Load Temperature Coefficient of Ioset - 0.03%/C - Case temperature = 0C ~Tc max 12V Auxiliary Output Voltage 10.8 V 12 V 13.2 V 12V Auxiliary Output Source Current 0 mA - 20 mA Return terminal is “Dim−“ Note: All specifications are typical at 25C unless otherwise stated. General Specifications Parameter Min. Typ. Max. Notes Efficiency at 120 Vac input: EUR-096S210DT/ST Io=1400 mA Io=2100 mA EUR-096S215DT Io=1750 mA Io=2150 mA EUR-096S350DT/ST Io=2450 mA Io=3500 mA 86.5% 87.0% 87.0% 86.5% 86.0% 85.5% 89.5% 90.0% 90.0% 89.5% 89.0% 88.5% Measured at 100%load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 220 Vac input: EUR-096S210DT/ST Io=1400 mA Io=2100 mA EUR-096S215DT Io=1750 mA Io=2150 mA EUR-096S350DT/ST Io=2450 mA Io=3500 mA 89.5% 89.5% 90.0% 89.5% 89.0% 88.5% 91.5% 91.5% 92.0% 91.5% 91.0% 90.5% Measured at 100%load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 277 Vac input: EUR-096S210DT/ST Io=1400 mA Io=2100 mA EUR-096S215DT Io=1750 mA Io=2150 mA EUR-096S350DT/ST Io=2450 mA Io=3500 mA 90.0% 90.0% 90.0% 89.5% 89.5% 88.5% 92.0% 92.0% 92.0% 91.5% 91.5% 90.5% Measured at 100%load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) MTBF - 354,000 Hours - Measured at 220Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 85,000 Hours - Measured at 220Vac input, 80%Load and 70C case temperature; See lifetime vs. Tc curve for the details
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes Operating Case Temperature for Safety Tc_s -40°C - +90°C Operating Case Temperature for Warranty Tc_w -40°C - +75C Case temperature for 5 years warranty Storage Temperature -40°C - +85°C Humidity: 5%RH to 100%RH Dimensions Inches (∅ × H) Millimeters (∅ × H) ∅5.12 x 2.76 ∅130 x 70 Net Weight - 1150 g - Note: All specifications are typical at 25C unless otherwise stated. Dimming Specifications Safety & EMC Compliance Safety Category Standard CE EN 61347-1, EN61347-2-13 KS KS C 7655 EMI Standards Notes EN 55015(1) Conducted emission Test &Radiated emission Test Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 200 uA 300 uA 450 uA Vdim(+) = 0 V Dimming Output Range EUR-096S210DT EUR-096S215DT EUR-096S350DT 10%Ioset - Ioset 1400 mA ≤ Ioset ≤ 2100 mA 1750 mA ≤ Ioset ≤ 2150 mA 2450 mA ≤ Ioset ≤ 3500 mA EUR-096S210DT EUR-096S215DT EUR-096S350DT 140 mA 175 mA 245 mA - Ioset 140 mA ≤ Ioset ＜ 1400 mA 175 mA ≤ Ioset ＜ 1750 mA 245 mA ≤ Ioset ＜ 2450 mA Recommended Dimming Input Range 0 V - 10 V Default 0-10V dimming mode. PWM_in High Level 3 V - 10 V Dimming mode set to PWM in PC interface. PWM_in Low Level -0.3 V - 0.6 V PWM_in Frequency Range 200 Hz - 2 KHz PWM_in Duty Cycle 1% - 99%
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Safety & EMC Compliance (Continued) EMI Standards Notes EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker FCC Part 15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interference, and [2] this device must accept any interference received, including interference that may cause undesired Operation. EMS Standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: line to line 4 kV, line to earth 4kV EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Lifetime vs. Case Temperature
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Inrush Current Waveform Efficiency vs. Load EUR-096S210DT/ST(Io=1400mA) EUR-096S210DT/ST(Io=2100mA) EUR-096S215DT(Io=1750mA) EUR-096S215DT(Io=2150mA)
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUR-096S350DT/ST(Io=2450mA) EUR-096S350DT/ST(Io=3500mA) Power Factor Total Harmonic Distortion
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Protection Functions Parameter Notes Over Temperature Protection Decreases output current, returning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. N o damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Dimming 0-10V Dimming The recommended implementation of the dimming control is provided below. Dim+(PUR) Dim-(GRY) 0 (1)-10V Dimmer Inventronics LED Driver V+(RED) V-(BLU) L Vaux(BLK/WHT)N G Vac Implementation 1: DC Input Notes: 1. The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like resistors and zener. 2. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly. 3. If 0-10V dimming is not used, Dim + should be open. PWM Dimming The recommended implementation of the dimming control is provided below. Dim+(PUR) Dim-(GRY) Inventronics LED Driver V+(RED) V-(BLU) L G Vaux(BLK/WHT)N Vac PWM Signal Implementation 2: Positive logic
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dim+(PUR) Dim-(GRY) V+(RED) V-(BLU) L G Vaux(BLK/WHT)N Vac PWM Signal Inventronics LED Driver Implementation 3: Negative logic Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly. 2. If PWM dimming is not used, Dim + should be open. 3. When PWM negative logic dimming mode and Dim+ is open, the driver will output minimum current. Programming Connection Diagram (Only DT models) Note: The driver does not need to be powered on during the programming process. Please refer to PRG-MUL2 Multi-Programmer datasheet for details.
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Installations Part Number Suffix -0000 -0001 Product Type Center Wire Feed Outside Wire Feed Product Appearance Installation Type Caution: 1. Complete visual inspection prior to assembly to insure driver is received in proper cond ition. 2. Thread length for mounting accessory (hook, ring, etc.) should be 16-22mm. After mounting accessory (hook, ring, etc.) is installed an M4 set screw should be secured in the open location on the driver collar. 3. Maximum weight of combined luminaire/driver assembly should not exceed 11Kg.
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Mechanical Outline EUR-096SxxxDT-0000 DEUR096S00008 AUTHORIZE: 6 7 8 A B C D E F 6 7 8 SHEET SCALEWEIGHTPROJ: ECN NO. DATE VERSION DESCRIPTION: P/N: MATERIAL: FINISH: UNLESS OTHERWISE SPECIFIED TOLERANCES AS FOLLOWS DO NOT SCALE DRAWING ISO 2768-1 AND ISO 2768-2 -DIMENSIONS ARE IN MM -SURF. ROUGHNESS TO BE -WORKMANSHIP SHALL BE THE -DENOTES CHANGE 3.2 BEST COMMERCIAL QUALITY E EUR-096SxxxDT-0000 2016.03.09 V+ (RED) V- (BLUE) jay 2016.03.17 Antony2016.04.21 jay 2016.12.1 jay 2017.3.16 DEUR096S00008 PROJ: Unspecified tolerance:± 1.5 ASSEMBLE NO. 1 2 3 4 5 6 7 8 A B C D E 2 3 41 A B C D E F REFERENCE DRAWING NO. CHECKED DRAWN MECHANICAL OUTLINE DRAWING PURPLE GRAY BLACK/WHITE Tc Hositing thread: DN15 Dimming Wire(UL21996 3*22AWG 5.0 ) OUTPUT (UL SJTW 2*18AWG 7.3) AC/L (BLACK) AC/N (WHITE) GND (GREEN) V+ (RED) V- (BLUE) INPUT (UL SJTW 3*18AWG 7.8) EUR-096SxxxST-0000 B C D E F PROJ: Unspecified tolerance:± 1.5 ASSEMBLE NO. B C D E B C D E F REFERENCE DRAWING NO. CHECKED DRAWN Tc POTENTIOMETER Hositing thread: DN15 INPUT (UL SJTW 3*18AWG 7.8) OUTPUT (UL SJTW 2*18AWG 7.3) AC/L (BLACK) AC/N (WHITE) GND (GREEN) V+ (RED) V- (BLUE)
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUR-096SxxxDT-0001 AUTHORIZE: 7 8 A B C D E F 7 8 SCALE VERSION DESCRIPTION: P/N: -DIMENSIONS ARE IN MM -SURF. ROUGHNESS TO BE -WORKMANSHIP SHALL BE THE -DENOTES CHANGE 3.2 BEST COMMERCIAL QUALITY D EUR-096SxxxDT-0001 DEUR096S00006 DEUR096S00006 PROJ: Unspecified tolerance:± 1.5 ASSEMBLE NO. AUTHORIZE: 1 2 3 4 5 6 7 8 A B C D E 2 3 4 5 7 81 A B C D E F REFERENCE DRAWING NO. CHECKED DRAWN MECHANICAL OUTLINE DRAWING PURPLE GRAY BLACK/WHITE Tc Hositing thread: INPUT (UL SJTW 3*18AWG 7.8) OUTPUT (UL SJTW 2*18AWG 7.3)Dimming Wire(UL21996 3*22AWG 5.0) AC/L (BLACK) AC/N (WHITE) GND (GREEN) V+ (RED) V- (BLUE) EUR-096SxxxST-0001 PROJ: Unspecified tolerance:± 1.5 AUTHORIZE: 3 4 5 6 7 8 A B C D E F 3 4 5 6 7 8 SHEET SCALEWEIGHTPROJ: MFG ECN NO.MARK DATE VERSION DESCRIPTION: P/N: MATERIAL: FINISH: UNLESS OTHERWISE SPECIFIED TOLERANCES AS FOLLOWS DO NOT SCALE DRAWING ISO 2768-1 AND ISO 2768-2 -DIMENSIONS ARE IN MM -SURF. ROUGHNESS TO BE -WORKMANSHIP SHALL BE THE -DENOTES CHANGE 3.2 BEST COMMERCIAL QUALITY C EUR-096SxxxST-0001 MECHANICAL OUTLINE DRAWING jay 2016.03.09 DEUR096S00007 POTENTIOMETER Hositing thread: AC INPUT (UL SJTW 3*18AWG) DC OUTPUT (UL SJTW 2*18AWG) RED(V+) BLUE(V-) jay 2016.03.171 2 底部孔定位 jay2 2 M4螺钉位置及加强筋变宽 2016.11.30 DEUR096S00007 PROJ: Unspecified tolerance:± 1.5 ASSEMBLE NO. 1 2 3 4 5 6 7 8 A B C D E 2 3 41 A B C D E F REFERENCE DRAWING NO. CHECKED DRAWN MECHANICAL OUTLINE DRAWING Tc POTENTIOMETER Hositing thread: INPUT (UL SJTW 3*18AWG 7.8) OUTPUT (UL SJTW 2*18AWG 7.3) AC/L (BLACK) AC/N (WHITE) GND (GREEN) V+ (RED) V- (BLUE)
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Optional Metal Parts HKK-D1500 BLT-M1000 REFERENCE DRAWING NO. DN15 PROJ: Unspecified tolerance:± 1 REFERENCE DRAWING NO. M10*1.5 PROJ: Unspecified tolerance:± 1 RoHS Compliance Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. 96W AOC Driver for High Bay EUR-096SxxxDT(ST) Rev. E www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2016-07-08 A Datasheets Release / / 2017-02-05 B Features / Updated Mechanical Outline / Updated 2017-07-06 C Input Specifications PF/THD (Notes) Updated Output Specifications Temperature Coefficient of Ioset Updated Safety & EMC Compliance / Updated Mechanical Outline / Updated 2018-03-05 D Features 5 Years Warranty Added Description / Updated Models EUR-096S215DT/ST Added Models Notes(2) Updated I-V Operation Area EUR-096S215DT/ST Added Output Current Setting(Ioset) Range EUR-096S215DT/ST Added Output Current Setting Range with Constant Power EUR-096S215DT/ST Added No Load Output Voltage EUR-096S215DT/ST Added Efficiency at 120 Vac input EUR-096S215DT/ST Added Efficiency at 220 Vac input EUR-096S215DT/ST Added Efficiency at 277 Vac input EUR-096S215DT/ST Added General Specifications Case temperature for 5 years warranty Updated Dimming Output Range EUR-096S215DT Added Efficiency vs. Load EUR-096S215DT/ST Added Mechanical Outline Optional Metal Parts Added 2018-03-20 E Features High Efficiency Updated Models / Updated I-V Operation Area / Updated Output Current Setting(Ioset) Range / Updated Output Current Setting Range with Constant Power / Updated No Load Output Voltage / Updated Efficiency at 120 Vac input / Updated Efficiency at 220 Vac input / Updated Efficiency at 277 Vac input / Updated Efficiency vs. Load / Updated