EUP-096SXXXSV INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 12
Technical content
Features
Description
The EUP-096SxxxSV series is a 96W, constant-current, AOC LED driver that operates from 90-305 Vac input with excellent power factor. It is created for many lighting applications including street, tunnel and bay. The high efficiency of these drivers and compac t metal case enables them to run cool er, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range (1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Power Factor Model Number 120Vac 220Vac 350-700mA 450-700mA 550 mA 90~305 Vac/ 127~250 Vdc 74~213Vdc 96 W 93.0% 0.99 0.96 EUP-096S070SV 700-1050mA 700-1050mA 700 mA 90~305 Vac/ 127~250 Vdc 48~137Vdc 96 W 93.0% 0.99 0.96 EUP-096S105SV 850-1500mA 1050-1500mA 1050 mA 90~305 Vac/ 127~300 Vdc 32~91Vdc 96 W 92.5% 0.99 0.96 EUP-096S150SV (4) 1000-2100mA 1400-2100mA 2100 mA 90~305 Vac/ 127~250 Vdc 24 ~ 69Vdc 96 W 92.0% 0.99 0.96 EUP-096S210SV (4) 2100-3500mA 2625-3500mA 2800 mA 90~305 Vac/ 127~250 Vdc 14 ~ 36Vdc 96 W 91.5% 0.99 0.96 EUP-096S350SV (4) Notes: (1) Output current range with constant power at 96W (2) Certified voltage range: 100-240Vac or 127-250Vdc (except CCC, PSE, KS and BIS) (3) Measured at 100% load and 220Vac input (see below “General Specifications” for details). (4) SELV Output. Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 90 Vac - 305 Vac 127~250 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.70 mA IEC60598-1; 240Vac/ 60Hz, Input AC Current - - 1.10 A Measured at 100% load and 120 Vac input. - - 0.65 A Measured at 100% load and 220 Vac input. High Efficiency (Up to 93%) Full Power at Wide Output Current Range (Constant Power) Adjustable Output Current (AOC) with Dip-switch Non-dimming Control Input Surge Protection: 6kV line-line, 10kV line-earth All-Around Protection: OVP, SCP, OTP Waterproof (IP67) SELV Output Suitable for Independent Use 5 Years Warranty
Specifications are subject to changes without notice. 96W AOC IP67 Driver EUP-096SxxxSV Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications (Continued) Parameter Min. Typ. Max. Notes Inrush Current(I2t) - - 1.30 A 2s At 220Vac input, 25C cold start, duration=640μs, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.9 - - At 100-240Vac, 50-60Hz, 60%-100% Load THD - - 10% At 220-240Vac, 50-60Hz, 75%-100% Load (72-96W) Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset 100% load Output Current Setting(Ioset) Range EUP-096S070SV EUP-096S105SV EUP-096S150SV EUP-096S210SV EUP-096S350SV 350 mA 700 mA 850 mA 1000 mA 2100 mA 700 mA 1050 mA 1500 mA 2100 mA 3500 mA Output Current Setting Range with Constant Power EUP-096S070SV EUP-096S105SV EUP-096S150SV EUP-096S210SV EUP-096S350SV 450 mA 700 mA 1050 mA 1400 mA 2625 mA 700 mA 1050 mA 1500 mA 2100 mA 3500 mA Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax 100% load. 20 MHz BW Startup Overshoot Current - - 10%Iomax 100% load No Load Output Voltage EUP-096S070SV EUP-096S105SV EUP-096S150SV EUP-096S210SV EUP-096S350SV 250 V 160 V 110 V 85 V 42 V Line Regulation - - ±0.5% 100% load Load Regulation - - ±1.5% Turn-on Delay Time - - 1.0 s Measured at 120Vac input, 60%-100% Load - - 0.5 s Measured at 220Vac input, 60%-100% Load Temperature Coefficient of Ioset - 0.03%/C - Case temperature = 0C ~Tc max Note: All specifications are typical at 25C unless otherwise stated.
Specifications are subject to changes without notice. 96W AOC IP67 Driver EUP-096SxxxSV Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications Parameter Min. Typ. Max. Notes Efficiency at 120 Vac input: EUP-096S070SV Io= 450 mA Io= 700 mA EUP-096S105SV Io= 700 mA Io=1050 mA EUP-096S150SV Io=1050 mA Io=1500 mA EUP-096S210SV Io=1400 mA Io=2100 mA EUP-096S350SV Io=2625 mA Io=3500 mA 88.5% 87.5% 88.5% 87.0% 88.0% 86.5% 87.5% 86.5% 87.5% 86.0% 90.5% 89.5% 90.5% 89.0% 90.0% 88.5% 89.5% 88.5% 89.5% 88.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 220 Vac input: EUP-096S070SV Io= 450 mA Io= 700 mA EUP-096S105SV Io= 700 mA Io=1050 mA EUP-096S150SV Io=1050 mA Io=1500 mA EUP-096S210SV Io=1400 mA Io=2100 mA EUP-096S350SV Io=2625 mA Io=3500 mA 91.0% 89.5% 91.0% 89.5% 90.5% 89.0% 90.0% 89.0% 89.5% 88.5% 93.0% 91.5% 93.0% 91.5% 92.5% 91.0% 92.0% 91.0% 91.5% 90.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 277 Vac input: EUP-096S070SV Io= 450 mA Io= 700 mA EUP-096S105SV Io= 700 mA Io=1050 mA EUP-096S150SV Io=1050 mA Io=1500 mA EUP-096S210SV Io=1400 mA Io=2100 mA EUP-096S350SV Io=2625 mA Io=3500mA 91.0% 90.0% 91.5% 90.0% 90.5% 89.0% 90.0% 89.0% 90.0% 89.0% 93.0% 92.0% 93.5% 92.0% 92.5% 91.0% 92.0% 91.0% 92.0% 91.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) MTBF - 355,000 Hours - Measured at 220Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 77,000 Hours - Measured at 220Vac input, 80%Load and 70C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90°C Operating Case Temperature for Warranty Tc_w -40°C - +75C Case temperature for 5 years warranty
Specifications are subject to changes without notice. 96W AOC IP67 Driver EUP-096SxxxSV Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes Storage Temperature -40°C - +8 5°C Humidity: 5%RH to 100%RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 6.34 × 2.37 × 1.44 161 × 60 × 36.5 With mounting ear 7.17 × 2.37 × 1.44 182 × 60 × 36.5 Net Weight - 750 g - Note: All specifications are typical at 25C unless otherwise stated. Safety &EMC Compliance Safety Category Standard CE EN 61347-1, EN61347-2-13 CCC GB 19510.1, GB 19510.14 KS KS C 7655 EMI Standards Notes EN 55015/GB 17743(1) Conducted emission Test &Radiated emission Test EN 61000-3-2/GB 17625.1 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker EMS Standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: line to line 6 kV, line to earth 10 kV (2) EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Require ments Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a lu minaire that contains it depends also on the other devices connected to the driver and on the fixture itself. (2) To perform electric strength (hi-pot) testing, the “GDT ground disconnect” (nut and metal lock sheet) on the driver end-cap should be removed temporarily to prevent the internal gas discharge tube from conducting (as allowed by IEC 60598-1 Clause 10.2). After testing is completed, these items must be reinstalled to restore line-to-earth surge protection and secure the end cap.
Specifications are subject to changes without notice. 96W AOC IP67 Driver EUP-096SxxxSV Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Derating Lifetime vs. Case Temperature Inrush Current Waveform
Specifications are subject to changes without notice. 96W AOC IP67 Driver EUP-096SxxxSV Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Efficiency vs. Load EUP-096S070SV(Io=450mA) EUP-096S070SV(Io=700mA) EUP-096S105SV(Io=700mA) EUP-096S105SV(Io=1050mA) EUP-096S150SV(Io=1050mA) EUP-096S150SV(Io=1500mA)
Specifications are subject to changes without notice. 96W AOC IP67 Driver EUP-096SxxxSV Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUP-096S210SV(Io=1400mA) EUP-096S210SV(Io=2100mA) EUP-096S350SV(Io=2625mA) EUP-096S350SV(Io=3500mA) Power Factor
Specifications are subject to changes without notice. 96W AOC IP67 Driver EUP-096SxxxSV Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Total Harmonic Distortion T Protection Functions Parameter Notes Over Temperature Protection Decreases output current, retu rning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Output Current vs. Dip Switch Setting EUP-096S070SV Dip Switch Setting Output Current Setting (Ioset) Output Voltage Range Notes 1 2 3 4 Typ. Min. Max. / OFF ON ON ON 700mA 74V 137V Output Current Setting with Constant Power. OFF ON ON OFF 650mA 74V 148V OFF ON OFF ON 600mA 80V 160V OFF ON OFF OFF 550mA 87V 174V OFF OFF ON ON 500mA 96V 192V OFF OFF ON OFF 450mA 107V 213V OFF OFF OFF ON 400mA 120V 213V Output Current Setting with Power Derating. OFF OFF OFF OFF 350mA 137V 213V
Specifications are subject to changes without notice. 96W AOC IP67 Driver EUP-096SxxxSV Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUP-096S105SV Dip Switch Setting Output Current Setting (Ioset) Output Voltage Range Notes 1 2 3 4 Typ. Min. Max. / ON ON ON ON 1050mA 48V 91V Output Current Setting with Constant Power. ON ON ON OFF 1000mA 48V 96V ON ON OFF ON 950mA 51V 101V ON ON OFF OFF 900mA 53V 106V ON OFF ON ON 850mA 57V 113V ON OFF ON OFF 800mA 60V 120V ON OFF OFF ON 750mA 64V 128V ON OFF OFF OFF 700mA 69V 137V EUP-096S150SV Dip Switch Setting Output Current Setting (Ioset) Output Voltage Range Notes 1 2 3 4 Typ. Min. Max. / ON ON ON ON 1500mA 32V 64V Output Current Setting with Constant Power. ON ON ON OFF 1450mA 33V 66V ON ON OFF ON 1400mA 35V 68.5V ON ON OFF OFF 1350mA 36V 71V ON OFF ON ON 1300mA 37V 74V ON OFF ON OFF 1250mA 39V 77V ON OFF OFF ON 1200mA 40V 80V ON OFF OFF OFF 1150mA 42V 83.5V OFF ON ON ON 1100mA 44V 87V OFF ON ON OFF 1050mA 46V 91V OFF ON OFF ON 1000mA 48V 91V Output Current Setting with Power Derating. OFF ON OFF OFF 950mA 51V 91V OFF OFF ON ON 900mA 54V 91V OFF OFF ON OFF 850mA 57V 91V
Specifications are subject to changes without notice. 96W AOC IP67 Driver EUP-096SxxxSV Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUP-096S210SV Dip Switch Setting Output Current Setting (Ioset) Output Voltage Range Notes 1 2 3 4 Typ. Min. Max. / ON ON ON ON 2100mA 24V 45.5V Output Current Setting with Constant Power. ON ON ON OFF 2000mA 24V 48V ON ON OFF ON 1900mA 26V 50.5V ON ON OFF OFF 1800mA 27V 53V ON OFF ON ON 1700mA 29V 56.5V ON OFF ON OFF 1600mA 30V 60V ON OFF OFF ON 1500mA 32V 64V ON OFF OFF OFF 1400mA 35V 69V OFF ON ON ON 1300mA 37V 69V Output Current Setting with Power Derating. OFF ON ON OFF 1200mA 40V 69V OFF ON OFF ON 1100mA 44V 69V OFF ON OFF OFF 1000mA 48V 69V EUP-096S350SV Dip Switch Setting Output Current Setting (Ioset) Output Voltage Range Notes 1 2 3 4 Typ. Min. Max. / ON ON ON ON 3500mA 14V 27.5V Output Current Setting with Constant Power. ON ON ON OFF 3325mA 15V 28.5V ON ON OFF ON 3150mA 16V 30.5V ON ON OFF OFF 2975mA 16V 32V ON OFF ON ON 2800mA 17V 34V ON OFF ON OFF 2625mA 18V 36V ON OFF OFF ON 2450mA 20V 36V Output Current Setting with Power Derating. ON OFF OFF OFF 2275mA 21V 36V OFF ON ON ON 2100mA 23V 36V Notes: 1. Dip switch must be set in the setting range as specified to insure the driver operates as expected. 2. Endcap covering dip switch must be tight to insure IP67 rating.
Specifications are subject to changes without notice. 96W AOC IP67 Driver EUP-096SxxxSV Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Mechanical Outline Unspecified tolerance:±1 PROJ: AC/L(BROWN) AC/N(BLUE) GND(YELLOW/GREEN) INPUT (VDE H05RN-F 3*1.0mm2 7.2) V+(BROWN) V-(BLUE) OUTPUT (VDE H05RN-F 2*1.0mm2 6.8) Tc RoHS Compliance Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. 96W AOC IP67 Driver EUP-096SxxxSV Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2016-08-09 A Datasheets Release / / 2017-11-29 B Features / Updated Models EUP-096S150SV Added Input Specifications PF/THD Updated Output Current Setting(Ioset) Range EUP-096S150SV Added Output Current Setting Range wit h Constant Power EUP-096S150SV Added No Load Output Voltage EUP-096S150SV Added Temperature Coefficient of Ioset Max 0.03%/C Typ 0.03%/ C Efficiency at 120 Vac input EUP-096S150SV Added Efficiency at 220 Vac input EUP-096S150SV Added Efficiency at 277 Vac input EUP-096S150SV Added General Specifications Operating Case Temperature for Warranty Tc_w Updated Safety &EMC Compliance / Updated Efficiency vs. Load EUP-096S150SV Added Output Current vs. Dip Switch Setting EUP-096S150SV Added 2018-04-20 C Description / Updated Mechanical Outline / Updated 2018-07-16 D EAC / Added