EUM-030SXXXDE INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 12
Technical content
Features
Description
The EUM-030SxxxDE series is a 30W, constant-current, programmable and IP66/IP67 rated LED driver that operates from 90-305Vac input with excellent power factor. It i s created for many lighting applications including low bay, tunnel and street, etc. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range (1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Typical Power Factor Model Number (4) 120Vac 220Vac 30-500mA 300-500mA 350 mA 90~305 Vac/ 127~300 Vdc 30~100 Vdc 30W 88.0% 0.99 0.96 EUM-030S050DE 55-1050mA 550-1050mA 700 mA 90~305 Vac/ 127~300 Vdc 17~54 Vdc 30W 87.0% 0.99 0.96 EUM-030S105DE Notes: (1) Output current range with constant power at 30W (2) Certified input voltage range: 100-240Vac. (3) Measured at 100% load and 220Vac input (see below “General Specifications” for details). (4) SELV output. Full Power at Wide Output Cur rent Range (Constant Power) Adjustable Output Current (AOC) with Programmability Isolated 1-5V/1-10V/10V PWM/3-Timer-Modes Dimmable Output Lumen Compensation Input Surge Protection: DM 4kV, CM 6kV All-Around Protection: OVP, SCP, OTP IP66/IP67 SELV Output Suitable for Luminaires with Protection Class I and II 5 Years Warranty
Specifications are subject to changes without notice. All specifications are typical at 25℃ unless otherwise stated. 30W Class II Programmable IP66/IP67 Driver EUM-030SxxxDE Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com I-V Operation Area EUM-030S050DE EUM-030S105DE Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area Programmed Operating Area Note: 300mA≤Ioset≤500mA (195,100)(30,100) 100 120 0 100 200 300 400 500 600 (300,100) (500,60) 100%Load 65%Load (500,30) (Ioset,30/Ioset)(10%Ioset,30/Ioset) (50,30) (Ioset,30) (500,39) Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area Programmed Operating Area Note: 550mA≤Ioset≤1050mA (357.5,54)(55,54) 0 200 400 600 800 1000 1200 (550,54) (1050,28.5) 100%Load65% Load (1050,17) (Ioset,30/Ioset)(10%Ioset,30/Ioset) (105,17) (Ioset,17) (1050,18.5) Input Specifications Parameter Min. Typ. Max. Notes Input AC Voltage 90 Vac - 305 Vac Input DC Voltage 127 Vdc - 300 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.70 mA IEC 60598-1; 240Vac/ 60Hz Input AC Current - - 0.33 A Measured at 100% load and 120 Vac input. - - 0.18 A Measured at 100% load and 220 Vac input. Inrush Current(I2t) - - 0.46 A 2s At 220Vac input, 25C cold start, duration=280 μs, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.9 - - At 100-277Vac, 50-60Hz, 65%-100% load THD - - 10% At 220-240Vac, 50-60Hz, 60%-100% load (18-30W) Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset At 100% load condition Output Current Setting(Ioset) Range EUM-030S050DE EUM-030S105DE 30 mA 55 mA 500 mA 1050 mA Output Current Setting Range with Constant Power EUM-030S050DE EUM-030S105DE 300 mA 550 mA 500 mA 1050 mA
Specifications are subject to changes without notice. All specifications are typical at 25℃ unless otherwise stated. 30W Class II Programmable IP66/IP67 Driver EUM-030SxxxDE Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Output Specifications (Continued) Parameter Min. Typ. Max. Notes Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax At 100% load condition. 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - 2%Iomax - At 100% load condition. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10%Iomax At 100% load condition No Load Output Voltage EUM-030S050DE EUM-030S105DE 120 V 60 V Line Regulation - - ±1% Measured at 100% load Load Regulation - - ±5% Turn-on Delay Time - - 0.5 s Measured at 120-277Vac input, 60%-100% load Temperature Coefficient of Ioset - 0.06%/C - Case temperature = 0C ~Tc max General Specifications Parameter Min. Typ. Max. Notes Efficiency at 120 Vac input: EUM-030S050DE Io= 300 mA Io= 500 mA EUM-030S105DE Io= 550 mA Io= 1050 mA 83.0% 84.5% 82.5% 83.5% 85.0% 86.5% 84.5% 85.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 220 Vac input: EUM-030S050DE Io= 300 mA Io= 500 mA EUM-030S105DE Io= 550 mA Io= 1050 mA 84.5% 86.0% 84.0% 85.0% 86.5% 88.0% 86.0% 87.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 277 Vac input: EUM-030S050DE Io= 300 mA Io= 500 mA EUM-030S105DE Io= 550 mA Io= 1050 mA 84.5% 86.0% 84.0% 85.0% 86.5% 88.0% 86.0% 87.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) MTBF - 725,000 Hours - Measured at 220Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 120,000 Hours - Measured at 220Vac input, 80%Load and 70C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90°C Operating Case Temperature for Warranty Tc_w -40°C - +80C Case temperature for 5 years warrant Humidity: 10% RH to 95% RH; Storage Temperature -40°C - + 85°C Humidity: 5%RH to 95%RH
Specifications are subject to changes without notice. All specifications are typical at 25℃ unless otherwise stated. 30W Class II Programmable IP66/IP67 Driver EUM-030SxxxDE Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes Dimensions Inches (L × W × H) Millimeters (L × W × H) 3.75 × 2.52 × 1.44 95 × 64 × 36.5 With mounting ear 4.41 × 2.52 × 1.44 112 × 64 × 36.5 Net Weight - 490 g - Dimming Specifications Safety &EMC Compliance Safety Category Standard ENEC & CE EN 61347-1 (1), EN 61347-2-13 UKCA BS EN 61347-1 (1), BS EN 61347-2-13 CB IEC 61347-1 (1), IEC 61347-2-13 KS KS C 7655 SAA AS/NZS 61347.1, AS/NZS 61347.2.13 EAC TP TC 004, TP TC 020 NOM NOM-058-SCFI Performance Standard ENEC EN 62384 Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 200 uA 300 uA 450 uA Vdim(+) = 0 V Dimming Output Range EUM-030S050DE EUM-030S105DE 10%Ioset - Ioset 300 mA ≤ Ioset ≤ 500 mA 550 mA ≤ Ioset ≤ 1050 mA EUM-030S050DE EUM-030S105DE 30 mA 55 mA - Ioset 30 mA ≤ Ioset ＜ 300 mA 55 mA ≤ Ioset ＜ 550 mA Recommended Dimming Range for 1-5V 0.25 V - 4.75 V Dimming mode set to 1-5V in PC interface. Recommended Dimming Range for 1-10V 1 V - 9 V Default 1-10V dimming mode with positive logic. PWM_in High Level - 10V - PWM_in Low Level - 0V - PWM_in Frequency Range 200 Hz - 2 KHz PWM_in Duty Cycle 0% - 100%
Specifications are subject to changes without notice. All specifications are typical at 25℃ unless otherwise stated. 30W Class II Programmable IP66/IP67 Driver EUM-030SxxxDE Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Safety &EMC Compliance (Continued) EMI Standards Notes BS EN/EN IEC 55015 (2) Conducted emission Test & Radiated emission Test BS EN/EN IEC 61000-3-2 Ha rmonic current emissions BS EN/EN 61000-3-3 Voltage fluctuations & flicker EMS Standards Notes BS EN/EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge BS EN/EN 61000-4-3 Radio-Frequenc y Electromagnetic Field Susceptibility Test-RS BS EN/EN 61000-4-4 Electrical Fast Transient / Burst-EFT BS EN/EN 61000-4-5 Surge Immunity Test: AC Power Line: Differen tial Mode 4 kV, Common Mode 6 kV BS EN/EN 61000-4-6 Conducted Radio Frequency Disturbances Test- CS BS EN/EN 61000-4-8 Power Frequency Magnetic Field Test BS EN/EN 61000-4-11 Voltage Dips BS EN/EN 61547 Electromagnetic I mmunity Requirements Applies To Lighting Equipment Note: (1) This product meets the requirements for IEC/BS EN/EN 61347 -1(Class II), when the driver is energized, the allowed leakage current is perceptible but harmless. (2) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Derating
Specifications are subject to changes without notice. All specifications are typical at 25℃ unless otherwise stated. 30W Class II Programmable IP66/IP67 Driver EUM-030SxxxDE Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Lifetime vs. Case Temperature Inrush Current Waveform Efficiency vs. Load EUM-030S050DE(Io=300mA) EUM-030S050DE(Io=500mA)
Specifications are subject to changes without notice. All specifications are typical at 25℃ unless otherwise stated. 30W Class II Programmable IP66/IP67 Driver EUM-030SxxxDE Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUM-030S105DE(Io=550mA) EUM-030S105DE(Io=1050mA) Power Factor Total Harmonic Distortion
Specifications are subject to changes without notice. All specifications are typical at 25℃ unless otherwise stated. 30W Class II Programmable IP66/IP67 Driver EUM-030SxxxDE Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Protection Functions Parameter Notes Over Temperature Protection Decreases output current, returning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Dimming 1-5V Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Dimmer Inventronics LED Driver L VprgN Vac Implementation 1: Positive logic Dim+ Dim- Dimmer Inventronics LED Driver L VprgN Vac Implementation 2: Negative logic Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. The dimmer can also be replac ed by an active 1-5V voltage source signal or passive components like zener. 3. When 1-5V negative logic dimming mode and Dim+ is open, the driver will output maximum current.
Specifications are subject to changes without notice. All specifications are typical at 25℃ unless otherwise stated. 30W Class II Programmable IP66/IP67 Driver EUM-030SxxxDE Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 1-10V Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Dimmer Inventronics LED Driver L VprgN Vac Implementation 3: Positive logic Dim+ Dim- Dimmer Inventronics LED Driver L VprgN Vac Implementation 4: Negative logic Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. The dimmer can also be replac ed by an active 1-10V voltage source signal or passive components like zener. 3. When 1-10V negative logic dimming mode and Dim+ is open, the driver will output minimum current. 10V PWM Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Inventronics LED Driver V-L N Vac Vprg PWM Signal Implementation 5: Positive logic
Specifications are subject to changes without notice. All specifications are typical at 25℃ unless otherwise stated. 30W Class II Programmable IP66/IP67 Driver EUM-030SxxxDE Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dim+ Dim- Inventronics LED Driver V-L N Vac Vprg PWM Signal Implementation 6: Negative logic Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. When 10V PWM negative logic di mming mode and Dim+ is open, the driver will output minimum current. Time Dimming Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self Adapting- Percentage and Traditional Timer. Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two days (if difference <15 minutes), assuming that the center point of the dimming curve is midnight local time. Self Adapting-Percentage: Automatically adjusts the on-time of each step by a constant percentage = (actual on-time for the past 2 days if difference <15 min) / (programmed on-time from the dimming curve). Traditional Timer: Follows the programmed timing curve after power on with no changes. Output Lumen Compensation Output Lumen Compensation (OLC) may be used to maintain constant light output over the life of the LEDs by driving them at a reduced current when new, then gradually i ncreasing the drive current over time to counteract LED lumen degradation. Programming Connection Diagram Note: The driver does not need to be powered on during the programming process. Please refer to PRG-MUL2 (Programmer) datasheet for details.
Specifications are subject to changes without notice. All specifications are typical at 25℃ unless otherwise stated. 30W Class II Programmable IP66/IP67 Driver EUM-030SxxxDE Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Mechanical Outline Unspecified tolerance:±1 PROJ: INPUT(VDE H05RN-F 3*1.0mm2 7.2) Dimming Wire(UL21996 22AWG/3C 5.0) L (BRN) N (BLU) (BLK) V+ (BRN) V- (BLU) OUTPUT(VDE H05RN-F 2*1.0mm2 6.8) Tc Vprg (BLK/WHT) Dim+ (PUR) Dim- (PNK) RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. All specifications are typical at 25℃ unless otherwise stated. 30W Class II Programmable IP66/IP67 Driver EUM-030SxxxDE Rev. D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2021-03-12 A Datasheets Release / / 2021-05-21 B SAA Logo / Added Safety &EMC Compliance / Updated 2022-06-10 C Product Photograph / Updated SAA Logo / Updated UKCA/EAC/NOM Logo / Added Safety &EMC Compliance / Updated 2023-06-09 D Product photograph / Updated Safety &EMC Compliance / Updated Dimming / Updated Programming Connection Diagram / Updated Mechanical Outline / Updated