EUG-096SXXXDT INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 17
Technical content
Features
Description
The EUG-096SxxxDT series is a 96W, constant-current, programmable LED driver tha t operates from 90-305 Vac input with excellent power factor. It is created for many l ighting applications including low bay, tunnel and street lights. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure tro uble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range (1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Typical Power Factor Model Number 120Vac 220Vac 45-700mA 450-700mA 530 mA 90 ~ 305 Vac 100 ~ 300 Vdc 74~213Vdc 96 W 92.0% 0.99 0.96 EUG-096S070DT 70-1050mA 700-1050mA 700 mA 90 ~ 305 Vac 100 ~ 300 Vdc 48~137Vdc 96 W 93.0% 0.99 0.96 EUG-096S105DT 140-2100mA 1400-2100mA 2100 mA 90 ~ 305 Vac 100 ~ 300 Vdc 24 ~ 69Vdc 96 W 92.0% 0.99 0.96 EUG-096S210DT (4) 175-2150mA 1750-2150mA 2100 mA 90 ~ 305 Vac 100 ~ 300 Vdc 24 ~ 55Vdc 96 W 91.5% 0.99 0.96 EUG-096S215DT (5) 245-3500mA 2450-3500mA 2800 mA 90 ~ 305 Vac 100 ~ 300 Vdc 14 ~ 39Vdc 96 W 91.0% 0.99 0.96 EUG-096S350DT (5) Notes: (1) Output current range with constant power at 96W (2) Certified input voltage range: UL, FCC 100-277Vac or 100-300Vdc; otherwise: 100-240Vac or 100-250Vdc. (except KS) (3) Measured at 100% load and 220Vac input (see below “General Specifications” for details). (4) SELV Output. (5) Class 2 & SELV Output. (6) Standard part UL Type TL. For UL Listed Class P models add suffix -00C0. Ultra High Efficiency (Up to 93.0%) Full Power at Wide Output Cur rent Range (Constant Power) 0-5V/0-10V/PWM/Timer Dimmable Input Surge Protection: DM 6kV, CM 10kV All-Around Protection: OVP, SCP, OTP IP67 and UL Dry / Damp / Wet Location Class 2 & SELV Output TYPE HL, for use in a Cla ss I, Division 2 hazardous (Classified) location UL Type TL (Temperature Limited) Class P, UL Listed Versions Available (See Note 6) 7 Years Warranty
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com I-V Operation Area EUG-096S070DT EUG-096S105DT EUG-096S210DT EUG-096S215DT EUG-096S350DT (700, 137) (700, 96) (Ioset,96/Ioset) (Ioset, 74)(70, 74) (10%Ioset,96/Ioset) (45, 213) (700, 74) 129 172 215 258 0 140 280 420 560 700 840 Output Voltage(V) Output Current (mA) Note: 450mA≤Ioset≤700mA Good Performance Area Programmed Operating Area Allowed Operating Area (1050, 91) (1050, 64) (Ioset,96/Ioset) (Ioset, 48)(105, 48) (10%Ioset,96/Ioset) (70, 137) (1050, 48) 108 135 162 0 210 420 630 840 1050 1260 Output Voltage(V) Output Current (mA) Note: 700mA≤Ioset≤1050mA Good Performance Area Programmed Operating Area Allowed Operating Area (2100, 46) (2100, 32) (Ioset,96/Ioset) (Ioset, 24)(210, 24) (10%Ioset,96/Ioset) (140, 69) (2100, 24) 0 420 840 1260 1680 2100 2520 Output Voltage(V) Output Current (mA) Note: 1400mA≤Ioset≤2100mA Good Performance Area Programmed Operating Area Allowed Operating Area (2150, 45) (2150, 31) (Ioset,96/Ioset) (Ioset, 24)(215, 24) (10%Ioset,96/Ioset) (175, 55) (2150, 24) 0 430 860 1290 1720 2150 2580 Output Voltage(V) Output Current (mA) Note: 1750mA≤Ioset≤2150mA Good Performance Area Programmed Operating Area Allowed Operating Area (3500, 27) (3500, 19) (Ioset,96Ioset) (Ioset, 14)(350, 14) (10%Ioset,96/Ioset) (245, 39) (3500, 14) 0 700 1400 2100 2800 3500 4200 Output Voltage(V) Output Current (mA) Note: 2450mA≤Ioset≤3500mA Good Performance Area Programmed Operating Area Allowed Operating Area
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications Parameter Min. Typ. Max. Notes Input AC Voltage 90 Vac - 305 Vac Input DC Voltage 100 Vdc - 300 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL8750; 277Vac/ 60Hz - - 0.70 mA IEC60598-1; 240Vac/ 60Hz Input AC Current - - 1.32 A Measured at 100% load and 100 Vac input. - - 0.60 A Measured at 100% load and 220 Vac input. Inrush Current(I2t) - - 1.65 A 2s At 220Vac input, 25℃ cold start, duration=760 μs, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.9 - - At 100-277Vac, 50-60Hz, 70%-100% Load THD - - 10% At 220-240Vac, 50-60Hz, 75%-100% Load (72-96W) Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset At 100% load condition Output Current Setting(Ioset) Range EUG-096S070DT EUG-096S105DT EUG-096S210DT EUG-096S215DT EUG-096S350DT 45 mA 70 mA 140 mA 175 mA 245 mA 700 mA 1050 mA 2100 mA 2150 mA 3500 mA Output Current Setting Range with Constant Power EUG-096S070DT EUG-096S105DT EUG-096S210DT EUG-096S215DT EUG-096S350DT 450 mA 700 mA 1400 mA 1750 mA 2450 mA 700 mA 1050 mA 2100 mA 2150 mA 3500 mA Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax At 100% load condition, 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - 2%Iomax - At 100% load condition. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10%Iomax At 100% load condition No Load Output Voltage EUG-096S070DT EUG-096S105DT EUG-096S210DT EUG-096S215DT EUG-096S350DT 280 V 180 V 90 V 59 V 50 V
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Output Specifications (Continued) Parameter Min. Typ. Max. Notes Line Regulation - - ±0.5% Measured at 100% load Load Regulation - - ±1.5% Turn-on Delay Time - - 1.0 s Measured at 120Vac input, 70%-100% Load - - 0.5 s Measured at 220Vac input, 70%-100% Load Temperature Coefficient of Ioset - 0.03%/C - Case temperature = 0C ~Tc max 12V Auxiliary Output Voltage 10.8 V 12 V 13.2 V 12V Auxiliary Output Source Current 0 mA - 20 mA Return terminal is “Dim−“ General Specifications Parameter Min. Typ. Max. Notes Efficiency at 120 Vac input: EUG-096S070DT Io= 450mA Io= 700mA EUG-096S105DT Io= 700mA Io=1050mA EUG-096S210DT Io=1400mA Io=2100mA EUG-096S215DT Io=1750mA Io=2150mA EUG-096S350DT Io=2450mA Io=3500mA 87.0% 86.0% 88.5% 87.0% 87.0% 87.0% 87.0% 86.5% 86.0% 85.5% 90.0% 89.0% 91.5% 90.0% 90.0% 90.0% 90.0% 89.5% 89.0% 88.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 220 Vac input: EUG-096S070DT Io= 450mA Io= 700mA EUG-096S105DT Io= 700mA Io=1050mA EUG-096S210DT Io=1400mA Io=2100mA EUG-096S215DT Io=1750mA Io=2150mA EUG-096S350DT Io=2450mA Io=3500mA 90.0% 89.0% 91.0% 89.0% 89.5% 90.0% 89.5% 89.5% 89.0% 88.0% 92.0% 91.0% 93.0% 91.0% 91.5% 92.0% 91.5% 91.5% 91.0% 90.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes Efficiency at 277 Vac input: EUG-096S070DT Io= 450mA Io= 700mA EUG-096S105DT Io= 700mA Io=1050mA EUG-096S210DT Io=1400mA Io=2100mA EUG-096S215DT Io=1750mA Io=2150mA EUG-096S350DT Io=2450mA Io=3500mA 90.5% 89.0% 91.5% 89.5% 90.0% 90.5% 90.0% 90.0% 89.5% 88.5% 92.5% 91.0% 93.5% 91.5% 92.0% 92.5% 92.0% 92.0% 91.5% 90.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) MTBF - 339,000 Hours - Measured at 220Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 98,000 Hours - Measured at 220Vac input, 80%Load and 70C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90°C Operating Case Temperature for Warranty Tc_w -40°C - +75°C Case temperature for 7 years warranty. Please see Inventronics Warranty Statement for complete details. Humidity: 10%RH to 95%RH Operating Case Temperature for Type TL Tc_TL -40°C - +64C Only UL Type TL models Storage Temperature -40°C - +85°C Humidity: 5%RH to 95%RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 6.85 × 2.66 × 1.44 174 × 67.5 × 36.5 With mounting ear 7.92 × 2.66 × 1.44 201 × 67.5 × 36.5 Net Weight - 890 g - Dimming Specifications Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 200 uA 300 uA 450 uA Vdim(+) = 0 V Dimming Output Range EUG-096S070DT EUG-096S105DT EUG-096S210DT EUG-096S215DT EUG-096S350DT 10%Ioset - Ioset 450mA≤ Ioset ≤ 700mA 700mA ≤ Ioset ≤ 1050mA 1400mA≤ Ioset ≤ 2100mA 1750mA≤ Ioset ≤ 2150mA 2450mA ≤ Ioset≤ 3500mA EUG-096S070DT EUG-096S105DT EUG-096S210DT EUG-096S215DT EUG-096S350DT 45mA 70mA 140mA 175mA 245mA - Ioset 45mA ≤ Ioset ＜ 450mA 70mA ≤ Ioset ＜ 700mA 140mA ≤ Ioset ＜ 1400mA 175mA ≤ Ioset ＜ 1750mA 245mA ≤ Ioset ＜ 2450mA
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dimming Specifications (Continued) Safety & EMC Compliance Safety Category Standard CE EN 61347-1, EN 61347-2-13 KS KS C 7655 EMI Standards Notes EN 55015(1) Conducted emission Test &Radiated emission Test EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker FCC Part 15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interfere nce, and [2] this device must accept any interference received, including interference that may cause undesired Operation. EMS Standards Notes EN 61000-4-2 Electrostatic Disch arge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Elect romagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test : AC Power Line: Differential Mode 6 kV, Common Mode 10 kV (2) EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Light ing Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. (2) To perform electric strength (hi-pot) testing, the “GDT ground disconnect” (nut and metal lock sheet) on the driver end-cap should be removed temporarily to prevent the internal g as discharge tube from conducting (as allowed by IEC 60598-1 Clause 10.2). After testing is completed, these items must be reinstalled to restore line-to-earth surge protection and secure the end cap. Parameter Min. Typ. Max. Notes Recommended Dimming Range for 0-5V 0 V - 5 V Dimming mode set to 0-5V in PC interface. Recommended Dimming Range for 0-10V 0 V - 10 V Default 0-10V dimming mode with positive logic. PWM_in High Level 3 V - 10 V Dimming mode set to PWM in PC interface. PWM_in Low Level -0.3 V - 0.6 V PWM_in Frequency Range 200 Hz - 2 KHz PWM_in Duty Cycle 1% - 99%
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Lifetime vs. Case Temperature Inrush Current Waveform Efficiency vs. Load EUG-096S070DT(Io=450mA) EUG-096S070DT(Io=700mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUG-096S105DT(Io=700mA) EUG-096S105DT(Io=1050mA) EUG-096S210DT(Io=1400mA) EUG-096S210DT(Io=2100mA) EUG-096S215DT(Io=1750mA) EUG-096S215DT(Io=2150mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUG-096S350DT(Io=2450mA) EUG-096S350DT(Io=3500mA) Power Factor Total Harmonic Distortion
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Protection Functions Parameter Notes Over Temperature Protection Decreases output current, returning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Dimming 0-5V Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Dimmer Inventronics LED Driver L VauxN G Vac Implementation 1: Positive logic Dim+ Dim- Dimmer Inventronics LED Driver L VauxN G Vac Implementation 2: Negative logic Notes: 1. Do NOT connect Dim− to the o utput V− or V+, otherwise the driver will not work properly. 2. The dimmer can also be replaced by an active 0-5V voltage so urce signal or passive components like zener. 3. When 0-5V negative logic dimming mode and Dim+ is open, the driver will output maximum current.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 0-10V Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Dimmer Inventronics LED Driver L VauxN G Vac Implementation 3: Positive logic Dim+ Dim- Dimmer Inventronics LED Driver L VauxN G Vac Implementation 4: Negative logic Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. The dimmer can also be replaced by an active 0-10V voltage s ource signal or passive components like zener. 3. When 0-10V negative logic dimming mode and Dim+ is open, the driver will output minimum current. PWM Dimming The recommended implementation of the dimming control is provided below.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dim+ Dim- Inventronics LED Driver L G Vaux N Vac PWM Signal Implementation 5: Positive logic Dim+ Dim- Inventronics LED Driver L G Vaux N Vac PWM Signal Implementation 6: Negative logic Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. When PWM negative logic dimming mode and Dim+ is open, the d river will output minimum current.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Time Dimming Set the timing curve by pulling the sliders. Programming Connection Diagram EUG-096SxxxDT
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUG-096SxxxDT-00C0 Note: The driver does not need to be powered on during the programming process. Please refer to PRG-MUL2 (Programmer) datasheet for details. Mechanical Outline EUG-096SxxxDT Dimming Wire(UL21996 3*22AWG 5.0 ) PURPLE GRAY INPUT (UL SJTW 3*18AWG 7.8) V+(RED) V-(BLUE) OUTPUT (UL SJTW 2*18AWG 7.3) AC/L(BLACK) AC/N(WHITE) GND(GREEN) PROJ: Unspecified tolerance:±1 BLACK/WHITE Tc
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com EUG-096SxxxDT-00C0 Dimming Wire(UL21996 3*22AWG 5.0 ) PURPLE PINK INPUT (UL SJTW 3*18AWG 7.8) V+(RED) V-(BLUE) OUTPUT (UL SJTW 2*18AWG 7.3) AC/L(BLACK) AC/N(WHITE) GND(GREEN) PROJ: Unspecified tolerance:±1 BLACK/WHITE Tc RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2015-07-08 A Datasheets Release / / 2016-03-03 B EUG-096S070DT / Added Net Weight / Updated Safety & EMC Compliance KS Added Mechanical Outline / Updated 2017-03-30 C EUG-096S215DT / Added I-V Operation Area EUG-096S215DT Added Output Specifications Output Current Setting(Ioset) Range Updated Output Specifications Output Current Setting Range with Constant Power Updated Output Specifications No Load Output Voltage Updated General Specifications Efficiency at 120 Vac input Updated General Specifications Efficiency at 220 Vac input Updated General Specifications Efficiency at 277 Vac input Updated General Specifications Dimensions Updated Dimming Specifications Dimming Output Range Updated Safety & EMC Compliance / Updated Efficiency vs. Load EUG-096S215DT Added Programming Connection Diagram / Updated Mechanical Outline / Updated 2017-07-27 D Input Specifications PF/ THD Updated 2017-10-26 E Features Class P, UL Listed Versions Available (See Note 6) Added Features 7 Years Warranty Added Models (6) Standard part UL Type TL. For UL Listed Class P models add suffix -00C0. Added Operating Case Temperature for Warranty Tc_w / Updated Operating Case Temperature for Type TL Tc_TL Only UL Type TL models Added 2018-01-31 F Description / Updated General Specifications Lifetime Updated
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 96W Programmable IP67 Driver EUG-096SxxxDT Rev. G www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Revision History (Continued) Change Date Rev. Description of Change Item From To 2018-01-31 F General Specifications Operating Case Temperature for Warranty Updated Lifetime vs. Case Temperature / Updated 2022-02-25 G Features / Updated Programming Connection Diagram / Updated Mechanical Outline / Updated