EUD-200SXXXGV INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 12
Technical content
Features
Description
The EUD-200SxxxGV series is a 200W, constant-current, programmable LED driver that operates from 90-305 Vac input with excellent power factor. Created for arena, theatrical and architectural lights, it provides a dim-to- off mode with low standby power. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against over input surge, output voltage, short circuit, and over temperature. Models Max. Output Current Input Voltage Range(1) Output Voltage Range Max. Output Power Typical Efficiency (2) Power Factor Model Number (3) 120Vac 220Vac 700 mA 90 ~ 305 Vac 127~250 Vdc 143~286Vdc 200 W 93.5% 0.99 0.96 EUD-200S070GV 1050 mA 90 ~ 305 Vac 127~250 Vdc 95~190Vdc 200 W 93.5% 0.99 0.96 EUD-200S105GV 1400 mA 90 ~ 305 Vac 127~250 Vdc 71~142Vdc 200 W 93.0% 0.99 0.96 EUD-200S140GV 2100 mA 90 ~ 305 Vac 127~250 Vdc 47~ 95 Vdc 200 W 93.0% 0.99 0.96 EUD-200S210GV (4) 2450 mA 90 ~ 305 Vac 127~250 Vdc 41~ 82 Vdc 200 W 93.5% 0.99 0.96 EUD-200S245GV (4) 2800 mA 90 ~ 305 Vac 127~250 Vdc 35~ 71 Vdc 200 W 92.5% 0.99 0.96 EUD-200S280GV (4) 4200 mA 90 ~ 305 Vac 127~250 Vdc 24~ 48 Vdc 200 W 93.0% 0.99 0.96 EUD-200S420GV (4) 4900 mA 90 ~ 305 Vac 127~250 Vdc 21~ 41 Vdc 200 W 92.0% 0.99 0.96 EUD-200S490GV (4) Notes: (1) Certified input voltage range: 100-240Vac or 127-250Vdc (except KS) (2) Measured at full load and 220 Vac input. (3) All the models are certificated to KS, except EUD-200S070GV (4) SELV Output /g120 Ultra High Efficiency (Up to 93.5%) /g120 Programmable Constant-Current Output /g120 DMX512 Dimmable /g120 Standby Power /g1481 W /g120 Input surge protection: 4kV line-line, 6kV line-earth /g120 All-Around Protection: OVP, SCP, OTP /g120 Waterproof (IP67) /g120 SELV Output /g120 Suitable for Independent Use
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 200W Programmable IP67 Driver with DMX512 EUD-200SxxxGV Rev. F Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 90 Vac - 305 Vac 127~250 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.70 mA IEC60598-1; 240Vac/ 60Hz, grounding effectively Input AC Current - - 2.4 A Measured at full load and 100 Vac input. - - 1.2 A Measured at full load and 220 Vac input. Inrush Current(I2t) - - 3.2 A 2s At 220Vac input, 25ć cold start, duration=1.7 ms,10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.90 - - At 100-277Vac, 75%-100% Load Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Iomax - 5%Iomax At full load condition Output Current Setting(Ioset) Range 10%Iomax - 100%Iomax Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax At full load condition, 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - 2%Iomax - At full load condition. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10%Iomax At full load condition No Load Output Voltage EUD-200S070GV EUD-200S105GV EUD-200S140GV EUD-200S210GV EUD-200S245GV EUD-200S280GV EUD-200S420GV EUD-200S490GV 305V 205V 155V 110V 95V 80V 55V 48V Line Regulation - - f0.5% Measured at full load Load Regulation - - f1.5% Turn-on Delay Time - 0.8 s 1.5 s Measured at 120Vac and 220Vac input. Temperature Coefficient of Iomax - - 0.03%//g113C Case temperature = 0 /g113C ~Tc max Note: All specifications are typical at 25 /g113C unless otherwise stated.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 200W Programmable IP67 Driver with DMX512 EUD-200SxxxGV Rev. F General Specifications Parameter Min. Typ. Max. Notes Efficiency at 120 Vac input: EUD-200S070GV EUD-200S105GV EUD-200S140GV EUD-200S210GV EUD-200S245GV EUD-200S280GV EUD-200S420GV EUD-200S490GV 88.0% 88.0% 87.0% 87.0% 88.0% 86.0% 87.5% 87.0% 91.0% 91.0% 90.0% 90.0% 91.0% 89.0% 90.5% 90.0% Measured at full load and steady-state temperature in 25/g113C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 220 Vac input: EUD-200S070GV EUD-200S105GV EUD-200S140GV EUD-200S210GV EUD-200S245GV EUD-200S280GV EUD-200S420GV EUD-200S490GV 91.5% 91.5% 91.0% 91.0% 91.5% 90.5% 91.0% 90.0% 93.5% 93.5% 93.0% 93.0% 93.5% 92.5% 93.0% 92.0% Measured at full load and steady-state temperature in 25/g113C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 277 Vac input: EUD-200S070GV EUD-200S105GV EUD-200S140GV EUD-200S210GV EUD-200S245GV EUD-200S280GV EUD-200S420GV EUD-200S490GV 92.0% 91.5% 91.0% 91.0% 91.5% 91.0% 91.5% 90.5% 94.0% 93.5% 93.0% 93.0% 93.5% 93.0% 93.5% 92.5% Measured at full load and steady-state temperature in 25/g113C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Standby power - - 1 W Measured at 230Vac/50Hz; Dimming off MTBF - 341,000 Hours - Measured at 220Vac input, 80%Load and 25/g113C ambient temperature (MIL-HDBK-217F) Lifetime - 120,000 Hours - Measured at 220Vac input, 80%Load and 60/g113C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90/g113C Operating Case Temperature for Warranty Tc_w -40°C - +70/g113C Storage Temperature -40°C - +85°C Humidity: 5%RH to 100%RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 8.82 × 2.66 × 1.56 224 × 67.5 × 39.5 With mounting ear 9.88 × 2.66 × 1.56 251 × 67.5 × 39.5 Net Weight - 1200 g - Note: All specifications are typical at 25 /g113C unless stated otherwise.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 200W Programmable IP67 Driver with DMX512 EUD-200SxxxGV Rev. F Dimming Specifications Note: All specifications are typical at 25 /g113C unless stated otherwise. Standards Compliance Safety Category Standard CE EN 61347-1, EN61347-2-13 KS KS C 7655 EMI standards Notes EN 55015(1) Conducted emission Test & Radiated emission Test EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker EMS standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: line to line 4 kV, line to earth 6 kV (2) EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment DMX512 Standards Notes DMX512 E.11-2008(R2013) USITT DMX512-A RS-485 EIA/TIA-485 Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Parameter Min. Typ. Max. Notes DMX+ to DMX- -6 V - 6 V DMX+ to Chassis 22M ohm - - At 42Vdc DMX- to Chassis 22M ohm - - At 42Vdc Logic 0 Input - - -0.2 V DMX+ to DMX- Logic 1 Input 0.2 V - - DMX+ to DMX- Communication Baud Rate - 250k bps - Dimming Output Range 10%Iomax - 100%Ioset 10%Iomax İ Ioset İ 100%Iomax
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 200W Programmable IP67 Driver with DMX512 EUD-200SxxxGV Rev. F (2) To perform electric strength (hi-pot) testing, the “GDT ground disconnect” (nut and metal lock sheet) on the driver end-cap should be removed temporarily to prevent the internal gas discharge tube from conducting (as allowed by IEC 60598-1 Clause 10.2). After testing is completed, these items must be reinstalled to restore line-to-earth surge protection and secure the end cap. Lifetime vs. Case Temperature Inrush Current Waveform
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 200W Programmable IP67 Driver with DMX512 EUD-200SxxxGV Rev. F Efficiency vs. Load EUD-200S070GV EUD-200S105GV EUD-200S140GV EUD-200S210GV EUD-200S245GV EUD-200S280GV
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 200W Programmable IP67 Driver with DMX512 EUD-200SxxxGV Rev. F EUD-200S420GV EUD-200S490GV Power Factor Total Harmonic Distortion
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 200W Programmable IP67 Driver with DMX512 EUD-200SxxxGV Rev. F Protection Functions Parameter Notes Over Temperature Protection Decreases output current, returning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Dimming /g122 DMX512 Dimming Implementation: DMX512 Dimming
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 200W Programmable IP67 Driver with DMX512 EUD-200SxxxGV Rev. F Implementation: DMX512 Daisy chain Note: (1) Up to 32 drivers may be daisy-chained, terminated by a 120 ohm resistor (connected between DMX+ & DMX- at the last driver) (2) 300m maximum length (3) 100m maximum between drivers (4) For best performance, a characteristic impedance of 120 ohms should be maintained for the entire length of the control line.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 200W Programmable IP67 Driver with DMX512 EUD-200SxxxGV Rev. F /g122 Dimming Connection Diagram Programming Connection Diagram Note: The driver needs to be powered on during the programming process. /g122 Please refer to UT-890 Programmer datasheet for details.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 200W Programmable IP67 Driver with DMX512 EUD-200SxxxGV Rev. F Mechanical Outline BROWN(ACL) BLUE(ACN) YELLOW/GREEN (GND) DC OUTPUT (VDE H05RN-F 2*1.0mm2) AC INPUT(VDE H05RN-F 3*1.0mm2) BLUE(V-) BROWN(V+) PROJ: Unspecified tolerance:±1 GRAY PURPLE BLACK/WHITE DIMMING WIRE (VDE 3*0.5mm2 ) Tc RoHS Compliance Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 200W Programmable IP67 Driver with DMX512 EUD-200SxxxGV Rev. F
Revision History
Date Rev. Description of Change Item From To 2015-03-13 A Datasheets Release / / 2016-01-25 B KS / Added External Grounding Screw Solution / / Features / Updated Safety & EMC Compliance Standards Compliance Updated DMX512 Standards / Added Dimming / Updated Programming Connection Diagram / Updated Mechanical Outline / Updated 2016-03-31 C General Specifications With mounting ear Updated Safety &EMC Compliance / Updated 2016-08-22 D Global Mark / Added DMX512 Dimming / Updated Programming Connection Diagram / Updated Mechanical Outline / Updated 2017-03-07 E Inrush Current(I 2t) / Updated 2019-08-22 F CCC Logo / Deleted PSE Logo / Deleted Global Mark Logo / Updated Models Notes(1) Updated Safety &EMC Compliance KS Updated