ETC-150SXXXDT INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Features
Description
The ETC-150SxxxDT(ST) series is a 150W, constant-current LED driver that operates from 312 ~ 528 Vac input with excellent power factor. It is created for many lighting applications including high bay, tunnel and roadway. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Output Current (1) Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Power Factor Model Name 347Vac 480Vac 580 mA 312 ~ 528 Vac 129~258Vdc 150 W 91% 0.95 0.90 ETC-150S058DT(ST) 700 mA 312 ~ 528 Vac 107~214Vdc 150 W 91% 0.95 0.90 ETC-150S070DT(ST) 1050 mA 312 ~ 528 Vac 71~142 Vdc 150 W 90% 0.95 0.90 ETC-150S105DT(ST) 1400 mA 312 ~ 528 Vac 53~107 Vdc 150 W 90% 0.95 0.90 ETC-150S140DT(ST) (4) 2100 mA 312 ~ 528 Vac 36~71 Vdc 150 W 90% 0.95 0.90 ETC-150S210DT(ST) (4) 2800 mA 312 ~ 528 Vac 27~54 Vdc 150 W 90% 0.95 0.90 ETC-150S280DT(ST) (4) 3500 mA 312 ~ 528 Vac 21~43 Vdc 150 W 89% 0.95 0.90 ETC-150S350DT(ST) (4) 4200 mA 312 ~ 528 Vac 18~36 Vdc 150 W 89% 0.95 0.90 ETC-150S420DT(ST) (4) Notes: (1) The output current is adjustable at factory from 50% to 100%. (2) Certified input voltage range: 347-480Vac (3) Measured at 100% load and 347 Vac input. (4) SELV output Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 312 Vac - 528 Vac Input Frequency 47 Hz - 63 Hz Leakage Current - - 1 mA At 480Vac/60Hz input; grounding effectively High Efficiency (Up to 91%) Constant Current Output 0-10V Dimming Control Input Surge Protection: 4kV line-line, 6kV line-earth All-Around Protection: OVP, SCP, OTP Waterproof (IP67) and UL Dry / Damp / Wet Location SELV Output TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ETC-150SxxxDT(ST) Rev. F Input Specifications (Continued) Parameter Min. Typ. Max. Notes Input AC Current - - 0.70 A Measured at 100% load and 347 Vac input. - - 0.42 A Measured at 100% load and 480 Vac input. Inrush Current(I2t) - - 0.15 A 2s At 480Vac input 25C cold start, duration=1.5 ms, 10%Ipk-10%Ipk. PF 0.90 - - At 347-480Vac, 50-60Hz, 75%-100% Load Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5% 5% Total Output Current Ripple (pk-pk) - 5%Io 10%Io At 100% load condition, 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - 2%Io - At 100% load condition. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10%Io At 100% load condition. No load Output Voltage IO = 580 mA IO = 700 mA IO = 1050 mA IO = 1400 mA IO = 2100 mA IO = 2800 mA IO = 3500 mA IO = 4200 mA 270 V 225 V 155 V 120 V 85 V 65 V 50 V 42 V Line Regulation - - ±1% Load Regulation - - ±3% Turn-on Delay Time - - 1.0 s Measured at 347Vac and 480Vac input, 75%-100% Load Temperature coefficient - 0.03%/C - Case temperature = 0C ~Tc max Note: All specifications are typical at 25 C unless stated otherwise. Protection Functions Parameter Notes Over Temperature Protection Decreases output current, re turning to normal after over temperature is removed. Short Circuit Protection No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ETC-150SxxxDT(ST) Rev. F General Specifications Parameter Min. Typ. Max. Notes Efficiency at 347 Vac input: IO = 580 mA IO = 700 mA IO = 1050 mA IO = 1400 mA IO = 2100 mA IO = 2800 mA IO = 3500 mA IO = 4200 mA 90% 90% 89% 89% 89% 89% 88% 88% 91% 91% 90% 90% 90% 90% 89% 89% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 1.0% lower if measured immediately after startup.) Efficiency at 480 Vac input: IO = 580 mA IO = 700 mA IO = 1050 mA IO = 1400 mA IO = 2100 mA IO = 2800 mA IO = 3500 mA IO = 4200 mA 89% 89% 88% 88% 88% 88% 87% 87% 90% 90% 89% 89% 89% 89% 88% 88% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 1.0% lower if measured immediately after startup.) MTBF - 250,000 hours - Measured at 480Vac input, 80%Load and 25C ambient temperature (MIL-HDBK-217F) Lifetime - 145,700 hours - Measured at 480Vac input, 80%Load and 60C Case temperature; See life time vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90°C Operating Case Temperature for Warranty Tc_w -40°C - +75°C Storage Temperature -40 °C - +85 °C Humidity: 5% RH to 100% RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 7.40 × 3.70 × 1.71 188 × 93.9 × 43.5 With mounting ear 8.74× 3.70 × 1.71 222× 93.9 × 43.5 Net Weight - 1420 g - Note: All specifications are typical at 25 C unless stated otherwise. Safety & EMC Compliance Safety Category Standard UL/CUL UL 8750, CAN/CSA-C22.2 No. 250.13 EMI Standard Notes FCC Part 15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interference, and [2] this device must accept any interference received, incl uding interference that may cause undesired Operation. EMS Standard Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ETC-150SxxxDT(ST) Rev. F Safety & EMC Compliance (Continued) EMS Standard Notes EN 61000-4-5 Surge Immunity Test: AC Power Line: line to line 4 kV, line to earth 6 KV EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Derating Curve Lifetime vs. Case Temperature Curve
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ETC-150SxxxDT(ST) Rev. F Efficiency vs. Load ETC-150S058DT(ST) ETC-150S070DT(ST) ETC-150S105DT(ST) ETC-150S140DT(ST) ETC-150S210DT(ST) ETC-150S280DT(ST)
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ETC-150SxxxDT(ST) Rev. F ETC-150S350DT(ST) ETC-150S420DT(ST) Power Factor Characteristics Total Harmonic Distortion Curve
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ETC-150SxxxDT(ST) Rev. F Dimming Control (On secondary side) Parameter Min. Typ. Max. Notes 12V output voltage 10.8 V 12 V 13.2 V 12V output source current 0 mA - 20 mA Absolute maximum voltage on the 0~10V input pin -20 V - 20 V Source current on 0~10V input pin 100 uA 140 uA 180 uA The dimmer control is operated from an input signal of 1 – 10 Vdc. Recommended implementations are provided below. Implementation 1: DC Input Implementation 2: External Resistor Notes: 1. Io is actual output current and Ir is rated current without dimming control. 2. For the driver to operate properly, the load voltage must be maintained above the minimum voltage threshold (approx. 50% of the max. output voltage for any given model) 3. If the output voltage is maintained above 50% of the maximum output voltage, the dimming control may be operated over the entire 1-10V range with output current varying from 10% to 100% of Ir. 4. The dimming signal is allowed to be less than 1V, however, when it is used between 0-1V, the output current is 10%Ir. 5. Do not connect the GND of dimming to the output; otherwise, the LED driver will not work normally. If 0-10V dimming is not used, Dim + can be either open or connected to Vaux.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ETC-150SxxxDT(ST) Rev. F Mechanical Outline ETC-150SxxxDT Unspecified tolerance:±1 PROJ: AC/L (BLACK) AC/N (WHITE) GND (GREEN) INPUT (UL STW 3*18AWG 9.5) OUTPUT (UL SJTW 2*18AWG 7.3) V+ (RED) V- (BLUE) GRAY PURPLE BLACKK/WHITE DIMMING WIRE (UL21996 3*22AWG 5.0) Tc ETC-150SxxxST Unspecified tolerance:±1 PROJ: AC/L (BLACK) AC/N (WHITE) GND (GREEN) INPUT (UL STW 3*18AWG 9.5) OUTPUT (UL SJTW 2*18AWG 7.3) V+ (RED) V- (BLUE) Tc RoHS Compliance Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Current IP67 Driver ETC-150SxxxDT(ST) Rev. F
Revision History
Date Rev. Description of Change Item From To 2012-12-31 A Datasheets Release / / 2013-03-06 B Io /Ir vs.Rx Curve / Added 2013-12-19 C Mechanical Outline / Corrected 2015-11-09 D Format / Updated Features / Updated Description / Updated Input Specifications / Updated Output Specifications Total Output Current Ripple (pk-pk) Added Output Specifications Output Current Ripple at < 200 Hz (pk-pk) Added General Specifications Case Temperature Operating Case Temperature for Safety Tc_s General Specifications Operating Case Temperature for Warranty Tc_w Added Safety & EMC Compliance / Updated 2015-11-09 D Protection Functions / Updated Dimming Control (On secondary side) / Updated 2017-07-26 E Features / Updated Input Specifications PF/ THD Updated Output Specifications Turn-on Delay Time Updated Output Specifications Temperature coefficient Updated General Specifications Storage Temperature Added General Specifications With mounting ear Added Environmental Specifications / Delete Safety & EMC Compliance / Updated Mechanical Outline / Updated 2019-02-28 F Description / Updated General Specifications - Net Weight 1300g 1420g