ESV-600SXXXST INVENTRONICS

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

Description

The ESV-600SxxxST series is a 600W, constant-voltage IP67 LED driver that operates from 249~528 Vac input with excellent power factor. It is created for many lighting applications including horticulture and sports. The high efficiency of these drivers enables them to run cooler , significantly improving relia bility and extending product life. To ensure trouble-free operation, protection is provided against input surge, input under voltage, input over voltage, over current, output over voltage, short circuit, and over temperature. Models Output Voltage Input Voltage Range(1) Output Current Range Max. Output Power Typical Efficiency (2) Power Factor Model Number (3) 277Vac 480Vac

48 Vdc 249~528Vac

352~500Vdc 0 ~ 12.5 A 600 W 93.0% 0.95 0.90 ESV-600S048ST

54 Vdc 249~528Vac

352~500Vdc 0 ~ 11.2 A 600 W 93.5% 0.95 0.90 ESV-600S054ST Notes: (1) Certified voltage range: 277-480Vac or 352-500Vdc. (2) Measured at 100% load and 480Vac input (see below “General Specifications” for details). (3) SELV output. Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 249 Vac - 528 Vac Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.7 mA At 480Vac/60Hz input Input AC Current - - 2.50 A Measured at 100% load and 277 Vac input. - - 1.45 A Measured at 100% load and 480 Vac input.  Ultra High Efficiency (Up to 93.5%)  Ultra High Input Voltage (249~528Vac)  Constant Voltage Output  Input Surge Protection: 6kV line-line, 10kV line-earth  All-Around Protection: OCP, OVP, SCP, OTP  Input UVP and Input OVP  Waterproof (IP67) and UL Dry / Damp / Wet Location  SELV Output  TYPE HL, for use in a Class I, Division 2 hazardous (classified ) location  5 years warranty

Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 600W Constant Voltage IP67 Driver ESV-600SxxxST Rev. A Input Specifications (Continued) Parameter Min. Typ. Max. Notes Inrush Current(I2t) - - 24.3 A 2s At 480Vac input, 25C cold start, duration = 896 μs, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.90 - - At 277-480Vac, 50-60Hz, 60%-100%load Output Specifications Parameter Min. Typ. Max. Notes Output Voltage Tolerance -2.5%V O - 2.5%V O At 100% load condition Output Voltage Ripple (pk-pk) - - 2%VO At 0% - 100% load condition. Measured by

20 MHz bandwidth oscilloscope and the

output paralleled a 0.1 uF ceramic capacitor and a 10 uF electrolytic capacitor. Output Voltage Overshoot / Undershoot - - 5%Vo Line Regulation - - ±0.5% Measured at 100% load Load Regulation - - ±1.0% Turn-on Delay Time - - 0.5 s Measured at 277Vac input, 100% load - - 0.5 s Measured at 480Vac input, 100% load Load Dynamic Response Output Deviation - - 5%V O R/S: 1 A/μs Load: 10% ~ 100% load. Settling Time - - 10 ms Temperature Coefficient - 0.03%/C - Case temperature = 0C~Tc max Note: All specifications are typical at 25C unless otherwise stated. General Specifications Parameter Min. Typ. Max. Notes Efficiency at 277Vac input: ESV-600S048SV ESV-600S054SV 89.5% 90.0% 91.5% 92.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 347Vac input: ESV-600S048SV ESV-600S054SV 90.5% 91.0% 92.5% 93.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 480Vac input: ESV-600S048SV ESV-600S054SV 91.0% 91.5% 93.0% 93.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.)

Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 600W Constant Voltage IP67 Driver ESV-600SxxxST Rev. A General Specifications (Continued) Parameter Min. Typ. Max. Notes MTBF - 203,000 Hours - Measured at 480Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 117,000 Hours Measured at 480Vac input, 80%load and 70C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40 °C - +88 C Operating Case Temperature for Warranty Tc_w -40 °C - +70 C Case temperature for 5 years warranty. Humidity: 10%RH to 100%RH Storage Temperature -40 °C - +85 °C Humidity: 5%RH to 100%RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 9.84 × 5.67 × 1.19 250 × 144 × 48.5 With mounting ear 276 × 144 × 48.5 Net Weight - 3330 g - Note: All specifications are typical at 25 C unless otherwise stated. Safety & EMC Compliance Safety Category Standard UL/CUL UL 8750, CAN/CSA-C22.2 No. 250.13 CE EN61347-1,EN61347-2-13 EMI Standards Notes EN 55015(1) Conducted emission Test &Radiated emission Test EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker FCC Part15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interference, and [2] this device must accept any interference receiv ed, including interference that may cause undesired operation. EMS Standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Powe r Line: line to line 6 kV, line to earth 10 kV(2) EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS

Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 600W Constant Voltage IP67 Driver ESV-600SxxxST Rev. A Safety & EMC Compliance (Continued) EMS Standards Notes EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. (2) To perform electric strength (hi-pot) testing, the “GDT ground disconnect” (nut and metal lock sheet) on the driver end-cap should be removed temporarily to prevent the internal gas discharge tube from conducting (as allowed by IEC 60598-1 Clause 10.2). After testing is completed, these items must be reinstalled to restore line-to-earth surge protection and secure the end cap. Lifetime vs. Case Temperature Inrush Current Waveform

Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 600W Constant Voltage IP67 Driver ESV-600SxxxST Rev. A Efficiency vs. Load ESV-600S048ST ESV-600S054ST Power Factor Total Harmonic Distortion

Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 600W Constant Voltage IP67 Driver ESV-600SxxxST Rev. A Protection Functions Parameter Notes Over Current Protection Auto Recovery. The driver sha ll be self-recovery when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Short Circuit Protection Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Temperature Protection Auto Recovery. Returnin g to normal after over temperature is removed. Mechanical Outline Unspecified tolerance:±1 PROJ: V+(RED) V-(BLUE) OUTPUT(UL SJTW 2*14AWG 8.8) AC/L(BLACK) AC/N(WHITE) GND(GREEN) INPUT(UL STW 3*18AWG 9.5) Tc RoHS Compliance Our products comply with the European Directive 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.

Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 600W Constant Voltage IP67 Driver ESV-600SxxxST Rev. A

Revision History

Date Rev. Description of Change Item From To 2018-07-05 A Datasheet Release / /