ESV-300SXXXST INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
Description
The ESV-300SxxxST series is a 300W, constant-voltage IP67 LED driver that operates from 249~528 Vac input with excellent power factor . It is created for many lighting applications including high bay, high mast, horticultural and roadway, etc. The high efficiency of these drivers enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against short circuit, over temperature, over voltage, and over current. Models Output Voltage Input Voltage Range Output Current Range Max. Output Power Typical Efficiency (1) Power Factor Model Number (2) 277Vac 480Vac 24 Vdc 249~ 528 Vac 0 ~ 12.5 A 300 W 89% 0.95 0.90 ESV-300S024ST 28 Vdc 249~ 528 Vac 0 ~ 10.7 A 300 W 90% 0.95 0.90 ESV-300S028ST 36 Vdc 249~ 528 Vac 0 ~ 8.33 A 300 W 90% 0.95 0.90 ESV-300S036ST 42 Vdc 249~ 528 Vac 0 ~ 7.14 A 300 W 90% 0.95 0.90 ESV-300S042ST 48 Vdc 249~ 528 Vac 0 ~ 6.25 A 300 W 90% 0.95 0.90 ESV-300S048ST Notes: (1) Measured at 25 /g113C, 100% load and 480 Vac input. (2) SELV output. Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 249 V - 528 V Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 mA At 480Vac 60Hz input Input AC Current - - 1.4 A Measured at 100% load and 277 Vac input. - - 0.8 A Measured at 100% load and 480 Vac input. /g121 Ultra High Efficiency (Up to 91%) /g121 Ultra High Input Voltage (249~528Vac) /g121 Constant Voltage Output /g121 Input Surge Protection: DM 4kV, CM 6kV /g121 All-Around Protection: SCP, OTP, OVP and Open Lamp /g121 IP67 and UL Dry / Damp / Wet Location /g121 SELV output /g121 TYPE HL, for use in a Class I, Division 2 hazardous (classified ) location
Specifications are subject to changes without notice. All specifications are typical at 25/g113C unless otherwise stated. 300W Constant Voltage IP67 Driver/g3ESV-300SxxxST Rev. O www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications (Continued) Parameter Min. Typ. Max. Notes Inrush Current - - 135 A At 480Vac input 25ć Cold start, Duration= 1.2 ms, 10%Ipk-10%Ipk Inrush Current(I2t) - - 9 A 2s PF 0.90 - - Measured at 100% load and 277~480 Vac input. Output Specifications Parameter Min. Typ. Max. Notes Output Voltage Tolerance -3% - 3% Other models except ESV-300S042ST Output Voltage Ripple (pk-pk) - - 2% VO At 100% load condition Output Voltage Overshoot / Undershoot - - 2% Vo ESV-300S042ST When power on and off - - 5% Vo Other models except ESV-300S042ST Line Regulation - - f1.0% Load Regulation - - f1.5% Turn-on Delay Time - 1.0 s 3.0 s Measured at 100% load, 277Vac input - 1.0 s 3.0 s Measured at 100% load, 480Vac input Temperature Coefficient - 0.03%//g113C - Case temperature = 0/g113C ~Tc max Protection Functions Parameter Min. Typ. Max. Notes Over Current Protection 110% I O 145% I O 180%I O Hiccup mode. The power supply shall be self- recovery when the fault condition is removed. Over Temperature Protection - 110/g113C - Auto Recovery, returning to normal after over temperature is removed. Short Circuit Protection Hiccup and no damage shall occur when any output operating in a short circuit condition. General Specifications Parameter Min. Typ. Max. Notes Efficiency VO = 24 V VO = 28 V VO = 36 V VO = 42 V VO = 48 V 89.0% 90.0% 90.0% 90.0% 90.0% 90.0% 90.5% 91.0% 91.0% 91.0% Measured at 100% load, 277Vac input, 25ć ambient temperature, after the unit is thermally stabilized.
Specifications are subject to changes without notice. All specifications are typical at 25/g113C unless otherwise stated. 300W Constant Voltage IP67 Driver/g3ESV-300SxxxST Rev. O www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes Efficiency VO = 24 V VO = 28 V VO = 36 V VO = 42 V VO = 48 V 88.0% 89.0% 89.0% 89.0% 89.0% 89.0% 90.0% 90.0% 90.0% 90.0% Measured at 100% load, 480Vac input, 25°C ambient temperature, after the unit is thermally stabilized. No Load Power Dissipation - - 3 W MTBF - 201,000 Hours - ESV-300S042ST Measured at 480Vac input, 80%Load and <25/g113>C ambient temperature (MIL- HDBK-217F) - 250,000 Hours - Other models except ESV-300S042ST Lifetime - 79,000 Hours - Measured at 480Vac input, 80%load; Case temperature=70°C @ Tc point. See life time vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +83°C Operating Case Temperature for Warranty Tc_w -40°C - +75/g113C Storage Temperature -40 °C - +85 °C Humidity: 5% RH to 100% RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 8.82 × 3.70 × 1.71 224 × 93.9 × 43.5 With mounting ear 9.88 ×3.70×1.71 251×93.9×43.5 Net Weight - 1710 g - Safety & EMC Compliance Safety Category Standard UL/CUL UL 8750, CAN/CSA-C22.2 No. 250.13 CE EN 61347-1,EN 61347-2-13 EMI Standards Notes EN 55015(1) Conducted emission Test &Radiated emission Test EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker FCC Part15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interference, and [2] this device must accept any interference received, including interference that may cause undesired operation. EMS Standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge
Specifications are subject to changes without notice. All specifications are typical at 25/g113C unless otherwise stated. 300W Constant Voltage IP67 Driver/g3ESV-300SxxxST Rev. O www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Safety & EMC Compliance (Continued) EMS Standards Notes EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: Differential Mode 4 kV, Common Mode 6 kV EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Lifetime vs. Case Temperature Curve Efficiency vs. Load (24V Model)
Specifications are subject to changes without notice. All specifications are typical at 25/g113C unless otherwise stated. 300W Constant Voltage IP67 Driver/g3ESV-300SxxxST Rev. O www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Power Factor Characteristics Mechanical Outline OUTPUT (UL SJTW 2*14AWG 8.8) INPUT(UL STW 3*18AWG 9.5) PROJ: Unspecified toleranc:±1 AC/L (BLACK) AC/N (WHITE) GND (GREEN) V+ (RED) V- (BLUE) Tc RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. All specifications are typical at 25/g113C unless otherwise stated. 300W Constant Voltage IP67 Driver/g3ESV-300SxxxST Rev. O www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2011-06-22 A Datasheet Released 2011-08-05 B Output Specifications-Turn-on Delay Time 2 s 3 s 2011-09-22 C UL,CE,FCC / Added 2011-10-12 D PF,EFF Curve / Added 2012-06-06 E Life Time Curve / Added Notes of life time / Updated EN61000-4-5 line to line 2 kV, line to earth 4 kV line to line 4 kV, line to earth 6 kV 2012-07-17 F Max Case Temperature / Updated 2012-08-02 G Safety Details / Updated Inrush Current 60 A 135 A 2012-09-28 H Inrush Current(I2t) / Added Min PF / Added Temperature coefficient / Added MTBF & Life time Typical / Added Life time curve / Added 2012-12-27 I Mechanical Outline / Updated Dimensions-height 44.5mm 43.5mm 2013-03-25 J Efficiency / 1% lower Output Voltage Overshoot/ Undershoot 2%Vo 5%Vo Mechanical Outline / Updated 2013-05-31 K OTP Latch mode Auto recovery mode 2016-01-25 L Format / Updated Features / Updated Description / Added Models ESV-300S042ST Added Output Specifications Output Voltage Tolerance Updated Output Specifications Output Voltage Overshoot / Undershoot Updated General Specifications MTBF Updated
Specifications are subject to changes without notice. All specifications are typical at 25/g113C unless otherwise stated. 300W Constant Voltage IP67 Driver/g3ESV-300SxxxST Rev. O www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Revision History (Continued) Change Date Rev. Description of Change Item From To 2016-01-25 L General Specifications Lifetime Updated General Specifications Net Weight Updated Lifetime vs. Case Temperature Curve / Updated Mechanical Outline / Updated 2017-06-08 M Features / Updated Description / Updated Models SELV output Added Temperature Coefficient / Updated General specifications Storage Temperature Added General specifications With mounting ear Added Environmental Specifications / Deleted Safety & EMC Compliance / Updated Mechanical Outline / Updated 2019-01-04 N Description / Updated General Specifications Net Weight Updated 2020-01-06 O Features 4kV line-line, 6kV line-earth DM 4kV, CM 6kV Features Waterproof (IP67) IP67 Safety &EMC Compliance EN 61000-4-5 Updated Derating Curve / Deleted RoHS Compliance / Updated Format Page footer Updated