ESV-150SXXXST INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
Description
The ESV-150SxxxST series is a 150W, constant-voltage LED driver that operates from 249-528 Vac input with excellent power factor. It is created for many lighting applications including high bay, area and roadway. The high efficiency of these drivers enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output short circuit, over temperature, over voltage, and over current. Models Output Voltage Input Voltage Range Output Current Range Max. Output Power Typical Efficiency (1) Power Factor Model Number 277Vac 480Vac 12 Vdc 249~ 528 Vac 0~10 A 120 W 91.5% 0.96 0.95 ESV-150S012ST 24 Vdc 249~ 528 Vac 0~6.25 A 150 W 93.0% 0.96 0.95 ESV-150S024ST 36 Vdc 249~ 528 Vac 0~4.17 A 150 W 94.5% 0.96 0.95 ESV-150S036ST 42 Vdc 249~ 528 Vac 0~3.57 A 150 W 93.5% 0.96 0.95 ESV-150S042ST 48 Vdc 249~ 528 Vac 0~3.13 A 150 W 94.0% 0.96 0.95 ESV-150S048ST Note: Measured at 100% load and 480 Vac input. Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 249 Vac - 528 Vac Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL8750; 277Vac/ 60Hz Input AC Current - - 0.7 A Measured at 100% load and 277Vac input. - - 0.4 A Measured at 100% load and 480Vac input. Inrush Current(I2t) - - 3.1 A 2s At 480Vac input 25/g113C cold start, duration=260/g541s, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.90 - - At 277-480Vac, 50-60Hz, 60%-100% Load THD - - 20% /g121 Ultra High Efficiency (Up to 94.5%) /g121 Constant Voltage Output /g121 Input Surge Protection: 4kV line-line, 6kV line-earth /g121 All-Around Protection: SCP, OTP, OVP, OCP /g121 Suitable for UL Dry / Damp / Wet Location /g121 TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Voltage IP67 Driver ESV-150SxxxST Rev. C Output Specifications Parameter Min. Typ. Max. Notes Output Voltage Tolerance -2.5%Vo - 2.5%Vo At 100% load condition Output Voltage Ripple (pk-pk) - - 2% V O At 100% load condition, 20 MHz BW Startup Overshoot Voltage - - 5% Vo At 100% load condition Line Regulation - - f0.5% Measured at 100% load Load Regulation - - f1.0% Turn-on Delay Time - 0.5 s 1.0 s Measured at 100% load, 277Vac and 480Vac inp ut Temperature Coefficient - 0.03%//g113C - Case temperature = 0/g113C ~Tc max Note: All specifications are typical at 25 /g113C unless otherwise stated. General Specifications Parameter Min. Typ. Max. Notes Efficiency at 277 Vac input: ESV-150S012ST ESV-150S024ST ESV-150S036ST ESV-150S042ST ESV-150S048ST 89.0% 90.5% 91.5% 90.5% 91.0% 91.0% 92.5% 93.5% 92.5% 93.0% Measured at 100% load and steady-state temperature in 25/g113C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 347 Vac input: ESV-150S012ST ESV-150S024ST ESV-150S036ST ESV-150S042ST ESV-150S048ST 89.0% 91.0% 92.0% 91.0% 91.5% 91.0% 93.0% 94.0% 93.0% 93.5% Measured at 100% load and steady-state temperature in 25/g113C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 480 Vac input: ESV-150S012ST ESV-150S024ST ESV-150S036ST ESV-150S042ST ESV-150S048ST 89.5% 91.0% 92.5% 91.5% 92.0% 91.5% 93.0% 94.5% 93.5% 94.0% Measured at 100% load and steady-state temperature in 25/g113C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) MTBF - 375,000 Hours - Measured at 480Vac input, 80%Load and 25/g113C ambient temperature (MIL-HDBK-217F) Lifetime - 104,000 Hours - Measured at 480Vac input, 80%Load and 70/g113C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90/g113C Operating Case Temperature for Warranty Tc_w -40°C - +80/g113C Storage Temperature -40°C - +85°C Humidity: 5%RH to 100%RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 8.70 × 2.66 × 1.56 221 × 67.5 × 39.7 With mounting ear 9.53 × 2.66 × 1.56 242 × 67.5 × 39.7 Net Weight - 1270 g - Note: All specifications are typical at 25 /g113C unless otherwise stated.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Voltage IP67 Driver ESV-150SxxxST Rev. C Safety & EMC Compliance Safety Category Standard UL/CUL UL8750, CAN/CSA-C22.2 No. 250.13 EMI Standards Notes FCC Part15(1) ANSI C63.4:2009 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired Operation. EMS Standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: line to line 4 kV, line to earth 6 kV EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Lifetime vs. Case Temperature
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Voltage IP67 Driver ESV-150SxxxST Rev. C Inrush Current Waveform Efficiency vs. Load ESV-150S012ST ESV-150S024ST ESV-150S036ST ESV-150S042ST
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Voltage IP67 Driver ESV-150SxxxST Rev. C ESV-150S048ST Power Factor Total Harmonic Distortion
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Voltage IP67 Driver ESV-150SxxxST Rev. C Protection Functions Parameter Min. Typ. Max. Notes Over Current Protection 110%I O 150%I O 200%I O Auto Recovery. The power supply shall be self-recovered within 60 f5s after the fault condition is removed. Over Temperature Protection Auto recovery. The power supply shall be self-recovery within 60f5s after the case temperature becomes normal. Short Circuit Protection Auto Recovery. The power supply shall be self-recovered within 60 f5s after the fault condition is removed. Over Voltage Protection Auto Recovery. The power supply shall be self-recovered within 60 f5s after the fault condition is removed. Mechanical Outline PROJ: Unspecified tolerance:±1 OUTPUT(UL SJTW 2*14AWG 8.8˅ INPUT(UL STW 3*18AWG 9.5) AC/L(BLACK) AC/N(WHITE) GND(GREEN ) V+(RED) V- (BLUE) Tc RoHS Compliance Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 150W Constant Voltage IP67 Driver ESV-150SxxxST Rev. C
Revision History
Date Rev. Description of Change Item From To 2015-03-10 A Datasheets Release / / 2015-10-29 B Lifetime / Update 2019-03-12 C Header outdoor IP67 Description outdoor Delete General Specifications With mounting ear Added Net Weight 1160g 1270g Safety & EMC Compliance Note Added Mechanical Outline / Update