ESM-680SXXXMX INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 19
Technical content
Features
Description
The ESM-680SxxxMx series is a 680W, constant-current, programmable and IP66/IP67 rated LED driver that operates from 249-528Vac input with excellent power factor. Created for many lighting applications including high mast, sports, UV-LED, aquaculture and horticulture, etc. It provides an auxiliary voltage and dim-to-off functionality for powering low voltage, wireless controls. The dimming contro l supports 0-10V dimming as well as two-way communication via Digital Dimming, a UART based communication protocol. The high efficiency of these drivers and compact metal case enables them to run cooler, significantl y improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, input under voltage, input over voltage, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range(1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Typical Power Factor Model Number (5) 277Vac 480Vac 352~500Vdc 200 ~ 544Vdc 680 W 96.0% 0.99 0.96 ESM-680S170Mx 352~500Vdc 141.5 ~ 378Vdc 680 W 95.5% 0 .99 0.96 ESM-680S240Mx 352~500Vdc 97.1 ~ 262Vdc 680 W 95.5% 0 .99 0.96 ESM-680S350Mx 352~500Vdc 60.7 ~ 163Vdc 680 W 95.5% 0.99 0.96 ESM-680S560Mx 352~500Vdc 40.4 ~ 108Vdc 680 W 95.5% 0.99 0.96 ESM-680S840Mx (4) 352~500Vdc 22.6 ~ 54Vdc 680 W 94.5% 0.99 0.96 ESM-680S15AMx (4) Notes: (1) Output current range with constant power at 680W. (2) Certified voltage range: 277-480Vac (3) Measured at 100% load and 480Vac input (see below “General Specifications” for details). (4) SELV output (5) x = G are UL Recognized and ENEC, etc. models; x = T are UL Class P models. Ultra High Efficiency (Up to 96%) Full Power at Wide Output Cur rent Range (Constant Power) Adjustable Output Curren t (AOC) with Programmability Isolated 0-10V/PWM/3-Timer-Modes Dimmable INV Digital Dimming, UART Ba sed Communication Protocol Dim-to-Off with Low Standby Power Minimum Dimming Level wit h 5% or 10% Selectable Maximum Dimming Level wit h 9V or 10V Selectable Fade Time Adjustable Always-on Auxiliary P ower: 12Vdc, 250mA Low Inrush Current Output Lumen Compensation End-of-Life Indicator Input Surge Protection: DM 6kV, CM 10kV All-Around Protection: IUVP, IOVP, OVP, SCP, OTP IP66/IP67 and UL Dry/Damp/Wet Location TYPE HL, for Use in a Class I, Division 2 Hazardous (Classified) Location 5 Years Warranty
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com I-V Operating Area ESM-680S170Mx ESM-680S240Mx ESM-680S350Mx ESM-680S560Mx ESM-680S840Mx ESM-680S15AMx (1700, 400) (1700, 240) (Ioset,680/Ioset) (10%Ioset,680/Ioset) (125, 544) (1700, 200) 110 220 330 440 550 660 0 340 680 1020 1360 1700 2040 Output Voltage(V) Output Current (mA) Note: 1250mA≤Ioset≤1700mA Good Performance Area Programmed Operating Area Allowed Operating Area (2400, 283) (2400, 170) (Ioset,680/Ioset) (10%Ioset,680/Ioset) (180, 378) (2400, 142) 152 228 304 380 456 0 480 960 1440 1920 2400 2880 Output Voltage(V) Output Current (mA) Note: 1800mA≤Ioset≤2400mA Good Performance Area Programmed Operating Area Allowed Operating Area (3500, 194) (3500, 117) (Ioset,680/Ioset) (Ioset, 97)(350, 97) (10%Ioset,680/Ioset) (260, 262) (3500, 97) 104 156 208 260 312 0 700 1400 2100 2800 3500 4200 Output Voltage(V) Output Current (mA) Note: 2600mA≤Ioset≤3500mA Good Performance Area Programmed Operating Area Allowed Operating Area (5600, 121) (5600, 73) (Ioset,680/Ioset) (Ioset, 61)(560, 61) (10%Ioset,680/Ioset) (420, 163) (5600, 61) 132 165 198 0 1120 2240 3360 4480 5600 6720 Output Voltage(V) Output Current (mA) Note: 4200mA≤Ioset≤5600mA Good Performance Area Programmed Operating Area Allowed Operating Area (8400, 81) (8400, 49) (Ioset,680/Ioset) (Ioset, 40)(840, 40) (10%Ioset,680/Ioset) (630, 108) (8400, 40) 110 132 0 1680 3360 5040 6720 8400 10080 Output Voltage(V) Output Current (mA) Note: 6300mA≤Ioset≤8400mA Good Performance Area Programmed Operating Area Allowed Operating Area (15000, 45) (15000, 27) (Ioset,680/Ioset) (10%Ioset,680/Ioset) (1260, 54) (15000, 23) 0 3000 6000 9000 12000 15000 18000 Output Voltage(V) Output Current (mA) Note: 12600mA≤Ioset≤15000mA Good Performance Area Programmed Operating Area Allowed Operating Area
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications Parameter Min. Typ. Max. Notes Input AC Voltage 249 Vac - 528 Vac Input DC Voltage 352 Vdc - 500 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL 8750; 480Vac/ 60Hz 0.70 mA IEC 60598-1; 480Vac/ 60Hz Input AC Current - - 2.95 A Measured at 100% load and 277 Vac input. - - 1.72 A Measured at 100% load and 480 Vac input. Inrush Current(I2t) - - 1.55 A 2s At 480Vac input, 25C cold start, duration=6.56 ms, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.90 - - At 277-480Vac, 50-60Hz, 60%-100% Load (408 - 680W) THD - - 20% Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset 100% load Output Current Setting(Ioset) Range ESM-680S170Mx ESM-680S240Mx ESM-680S350Mx ESM-680S560Mx ESM-680S840Mx ESM-680S15AMx 125 mA 180 mA 260 mA 420 mA 630 mA 1260 mA 1700 mA 2400 mA 3500 mA 5600 mA 8400 mA 15000 mA Output Current Setting Range with Constant Power ESM-680S170Mx ESM-680S240Mx ESM-680S350Mx ESM-680S560Mx ESM-680S840Mx ESM-680S15AMx 1250 mA 1800 mA 2600 mA 4200 mA 6300 mA 12600 mA 1700 mA 2400 mA 3500 mA 5600 mA 8400 mA 15000 mA Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax 100% load, 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - - 2%Iomax 70%-100% load Startup Overshoot Current - - 10%Iomax 100% load No Load Output Voltage ESM-680S170Mx ESM-680S240Mx ESM-680S350Mx ESM-680S560Mx ESM-680S840Mx ESM-680S15AMx 600 V 420 V 300 V 220 V 120 V 60 V Line Regulation - - ±0.5% 100% load Load Regulation - - ±3.0%
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Output Specifications (Continued) Parameter Min. Typ. Max. Notes Turn-on Delay Time - - 0.5 s Measured at 277-480Vac input, 60%- 100% Load Temperature Coefficient of Ioset - 0.03%/C - Case temperature = 0C ~Tc max 12V Auxiliary Output Voltage 10.8 V 12 V 13.2 V 12V Auxiliary Output Source Current 0 mA - 250 mA Return terminal is “Dim−“ 12V Auxiliary Output Transient Peak Current@ 6W - - 500 mA 500mA peak for a maximum duration of 2.2ms in a 6.0ms period during which time the average should not exceed 250mA. 12V Auxiliary Output Transient Peak Current@10W - - 850 mA 850mA peak for a maximum duration of 1.3ms in a 5.2ms period during which time the average should not exceed 250mA. General Specifications Parameter Min. Typ. Max. Notes Efficiency at 277 Vac input: ESM-680S170Mx Io= 1250 mA Io= 1700 mA ESM-680S240Mx Io= 1800 mA Io= 2400 mA ESM-680S350Mx Io= 2600 mA Io= 3500 mA ESM-680S560Mx Io= 4200 mA Io= 5600 mA ESM-680S840Mx Io= 6300 mA Io= 8400 mA ESM-680S15AMx Io= 12600 mA Io= 15000 mA 92.5% 92.0% 92.0% 91.5% 92.5% 92.0% 92.0% 91.5% 92.0% 91.0% 91.5% 91.5% 94.5% 94.0% 94.0% 93.5% 94.5% 94.0% 94.0% 93.5% 94.0% 93.0% 93.5% 93.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 400 Vac input: ESM-680S170Mx Io= 1250 mA Io= 1700 mA ESM-680S240Mx Io= 1800 mA Io= 2400 mA ESM-680S350Mx Io= 2600 mA Io= 3500 mA ESM-680S560Mx Io= 4200 mA Io= 5600 mA ESM-680S840Mx Io= 6300 mA Io= 8400 mA ESM-680S15AMx Io= 12600 mA Io= 15000 mA 93.5% 92.5% 93.0% 92.0% 93.5% 92.5% 93.0% 92.5% 93.0% 92.0% 92.0% 92.5% 95.5% 94.5% 95.0% 94.0% 95.5% 94.5% 95.0% 94.5% 95.0% 94.0% 94.0% 94.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes Efficiency at 480 Vac input: ESM-680S170Mx Io= 1250 mA Io= 1700 mA ESM-680S240Mx Io= 1800 mA Io= 2400 mA ESM-680S350Mx Io= 2600 mA Io= 3500 mA ESM-680S560Mx Io= 4200 mA Io= 5600 mA ESM-680S840Mx Io= 6300 mA Io= 8400 mA ESM-680S15AMx Io= 12600 mA Io= 15000 mA 94.0% 93.0% 93.5% 92.5% 93.5% 93.0% 93.5% 92.5% 93.5% 92.5% 92.5% 92.5% 96.0% 95.0% 95.5% 94.5% 95.5% 95.0% 95.5% 94.5% 95.5% 94.5% 94.5% 94.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Standby Power - 1.5 W - Measur ed at 480Vac/50Hz; Dimming off MTBF - 200,000 Hours - Measured at 480Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 102,000 Hours - Measured at 480Vac input, 80%Load and 70C case temperature; See lifetime vs. Tc curve for the details - 50,000 Hours - Measured at 277Vac input, 100%Load and 40C ambient temperature Operating Case Temperature for Safety Tc_s -40°C - +90°C Operating Case Temperature for Warranty Tc_w -40°C - +80°C Case temperature for 5 years warranty Humidity: 10% RH to 95% RH Storage Temperature -40°C - + 85°C Humidity: 5%RH to 95%RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 9.84 × 5.31 × 1.81 250 × 135 × 46 With mounting ear 275 × 135 × 46 Net Weight - 3060 g - Dimming Specifications Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 200 uA 300 uA 450 uA Vdim(+) = 0 V
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dimming Specifications (Continued) Parameter Min. Typ. Max. Notes Dimming Output Range with 10%-100% (Default) ESM-680S170Mx ESM-680S240Mx ESM-680S350Mx ESM-680S560Mx ESM-680S840Mx ESM-680S15AMx 10%Ioset - Ioset 1250 mA ≤ Ioset ≤ 1700 mA 1800 mA ≤ Ioset ≤ 2400 mA 2600 mA ≤ Ioset ≤ 3500 mA 4200 mA ≤ Ioset ≤ 5600 mA 6300 mA ≤ Ioset ≤ 8400 mA 12600 mA ≤ Ioset ≤ 15000 mA ESM-680S170Mx ESM-680S240Mx ESM-680S350Mx ESM-680S560Mx ESM-680S840Mx ESM-680S15AMx 125 mA 180 mA 260 mA 420 mA 630 mA 1260 mA - Ioset 125 mA ≤ Ioset ＜ 1250 mA 180 mA ≤ Ioset ＜1800 mA 260 mA ≤ Ioset ＜ 2600 mA 420 mA ≤ Ioset ＜ 4200 mA 630 mA ≤ Ioset ＜ 6300 mA 1260 mA ≤ Ioset ＜ 12600 mA Dimming Output Range with 5%-100% (Settable) ESM-680S170Mx ESM-680S240Mx ESM-680S350Mx ESM-680S560Mx ESM-680S840Mx ESM-680S15AMx 5%Ioset - Ioset 1250 mA ≤ Ioset ≤ 1700 mA 1800 mA ≤ Ioset ≤ 2400 mA 2600 mA ≤ Ioset ≤ 3500 mA 4200 mA ≤ Ioset ≤ 5600 mA 6300 mA ≤ Ioset ≤ 8400 mA 12600 mA ≤ Ioset ≤ 15000 mA ESM-680S170Mx ESM-680S240Mx ESM-680S350Mx ESM-680S560Mx ESM-680S840Mx ESM-680S15AMx 63 mA 90 mA 130 mA 210 mA 315 mA 630 mA - Ioset 125 mA ≤ Ioset ＜ 1250 mA 180 mA ≤ Ioset ＜1800 mA 260 mA ≤ Ioset ＜ 2600 mA 420 mA ≤ Ioset ＜ 4200 mA 630 mA ≤ Ioset ＜ 6300 mA 1260 mA ≤ Ioset ＜ 12600 mA Recommended Dimming Input Range 0 V - 10 V Default 0-10V dimming mode. Dim off Voltage 0.35 V 0.5 V 0.65 V Dim on Voltage 0. 55 V 0.7 V 0.85 V Hysteresis - 0.2 V - PWM_in High Level 3 V - 10 V Dimming mode set to PWM in Inventronics Programing software. PWM_in Low Level -0.3 V - 0.6 V PWM_in Frequency Range 200 Hz - 3 KHz PWM_in Duty Cycle 1% - 99% PWM Dimming off (Positive Logic) 3% 5% 8% PWM Dimming on (Positive Logic) 5% 7% 10% PWM Dimming off ( Negative Logic) 92% 95% 97% PWM Dimming on ( Negative Logic) 90% 93% 95% Hysteresis - 2% -
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Safety &EMC Compliance Safety Category Standard UL/CUL UL 8750,CAN/CS A-C22.2 No. 250.13 ENEC & CE EN 61347-1, EN 61347-2-13 UKCA BS EN 61347-1, BS EN 61347-2-13 CB IEC 61347-1 , IEC 61347-2-13 EAC TP TC 004, TP TC 020 Performance Standard ENEC EN 62384 EMI Standards Notes BS EN/EN IEC 55015(1) Conducted emission Test &Radiated emission Test BS EN/EN IEC 61000-3-2 Harmonic current emissions BS EN/EN 61000-3-3 Voltage fluctuations & flicker FCC Part 15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation i s subject to the following two conditions: [1] this device may not cause harmful interference, and [2] this device must accept any interference received, including in terference that may cause undesired Operation. EMS Standards Notes BS EN/EN 61000-4-2 Electrostati c Discharge (ESD): 8 kV air discharge, 4 kV contact discharge BS EN/EN 61000-4-3 Radio-Frequenc y Electromagnetic Field Susceptibility Test-RS BS EN/EN 61000-4-4 Electrical Fast Transient / Burst-EFT BS EN/EN 61000-4-5 Surge Immuni ty Test: AC Power Line: Differential Mode 6 kV, Common Mode 10 kV BS EN/EN 61000-4-6 Conducted Radi o Frequency Disturbances Test-CS BS EN/EN 61000-4-8 Power Frequency Magnetic Field Test BS EN/EN 61000-4-11 Voltage Dips BS EN/EN 61547 Electromagnetic I mmunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Lifetime vs. Case Temperature Inrush Current Waveform Efficiency vs. Load ESM-680S170Mx(Io=1250mA) ESM-680S170Mx(Io=1700mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESM-680S240Mx(Io=1800mA) ESM-680S240Mx(Io=2400mA) ESM-680S350Mx(Io=2600mA) ESM-680S350Mx(Io=3500mA) ESM-680S560Mx(Io=4200mA) ESM-680S560Mx(Io=5600mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESM-680S840Mx(Io=6300mA) ESM-680S840Mx(Io=8400mA) ESM-680S15AMx(Io=12600mA) ESM-680S15AMx(Io=15000mA) Power Factor
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Total Harmonic Distortion Protection Functions Parameter Min. Typ. Max. Notes Over Temperature Protection Decr eases output current, returning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short ci rcuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Input Under Voltage Protection (IUVP) Input Protection Voltage 220 Vac 230 Vac 240 Vac Turn off the output when the input voltage falls below protection voltage. Input Recovery Voltage 230 Vac 240 Vac 250 Vac Auto Recovery. The driver will restart when the input voltage exceeds recovery voltage. Input Over Voltage Protection (IOVP) Input Over Voltage Protection
550 Vac 570 Vac 590 Vac Turn off the output when the input voltage
exceeds protection voltage. Input Over Voltage Recovery
530 Vac 550 Vac 570 Vac
Auto Recovery. The driver will restart when the input voltage falls below recovery voltage. Max. of Input Over Voltage 590 Vac The driver can survive for 8 hours with a stable input voltage stress of 590Vac. Input Under Voltage Protection Diagram Io Protection Recovery
230 Vac 240 Vac
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Over Voltage Protection Diagram Io Protection Recovery
550 Vac 570 Vac
0-10V Dimming The recommended implementation of the dimming control is provided below. Implementation 1: Positive logic
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Implementation 2: Negative logic Notes: 1. Do NOT connect Dim− to the out put V− or V+, otherwise the driver will not work properly. 2. The dimmer can also be replac ed by an active 0-10V voltage source signal or passive components like zener. 3. When 0-10V negative logic dimming mode and Dim+ is open, the driver will dim to off and be standby. PWM Dimming The recommended implementation of the dimming control is provided below Dim+ Dim- Inventronics LED Driver L N Vac Vaux PWM Signal Implementation 3: Positive logic
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dim+ Dim- Inventronics LED Driver L N Vac Vaux PWM Signal Implementation 4: Negative logic Notes: 1. Do NOT connect Dim− to the out put V− or V+, otherwise the driver will not work properly. 2. When PWM negative l ogic dimming mode and Dim+ is open, the driver will dim to off and be standby.. Time Dimming Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self Adapting- Percentage and Traditional Timer. Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two days (if difference <15 minutes) , assuming that the center poin t of the dimming curve is midnight local time. Self Adapting-Percentage: Automatically adjusts the on-time of each step by a constant percentage = (actual on-time for the past 2 days if difference <15 min) / (programmed on-time from the dimming curve). Traditional Timer: Follows the programmed timing curve after power on with no changes. Output Lumen Compensation Output Lumen Compensation (OLC) may be used to maintain constant light output over the life of the LEDs by driving them at a reduced current when new, then gradually i ncreasing the drive current over time to counteract LED lumen degradation. Minimum Dimming Level with 5% or 10% Selectable The minimum dimming level can be set as 5% or 10% by Inventronics Multi Programmer,10% is default. Maximum Dimming Level with 9V or 10V Selectable The maximum dimming level can be set as corresponding dimming voltage is 9V or 10V by Inventronics Multi Programmer,9V is default. Fade Time Adjustable Soft-start time and dimming slope can be adjusted by Inventronics Multi Programmer to get customized fade time experience, disable mode is default. End Of Life End-of-Life (EOL) is providing a visual notification to a user that the LED module has reached the end of manufacturer-specified life and that the replacement is recommended. Once active, an indication is given at each power-up of the driver, which the driver indicates this th rough a lower light output during the first 1 minute before normal operation is continued. Digital Dimming Inventronics Digital Dimming is a UART (Universal Asynchronous Receive Transmitter) based communication protocol. Please refer to Inventronics Digital Dimming file for details.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Programming Connection Diagram Note: The driver does not need to be powered on during the programming process Please refer to PRG-MUL2 (Programmer) datasheet for details. Mechanical Outline ESM-680S170MG/ESM-680S240MG Unspecified tolerance:±1 PROJ: INPUT(UL SOOW 17AWG/3C & VDE H07RN-F 3*1.0mm2 9.8) DIMMING(UL21996 22AWG/3C 5.0) OUTPUT(UL SOOW 17AWG/2C & VDE H07RN-F 2*1.0mm2 9.3) Tc L (BRN) N (BLU) (YLW/GRN) Vaux (BLK/WHT) Dim+ (PUR) Dim- (PNK) V+ (BRN) V- (BLU)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESM-680S350MG/ESM-680S560MG/ESM-680S840MG Unspecified tolerance:±1 PROJ: INPUT(UL SOOW 17AWG/3C & VDE H07RN-F 3*1.0mm2 9.8) DIMMING(UL21996 22AWG/3C 5.0) OUTPUT(UL SJOW 17AWG/2C & VDE H05RN-F 2*1.0mm2 7.8) Tc L (BRN) N (BLU) (YLW/GRN) Vaux (BLK/WHT) Dim+ (PUR) Dim- (PNK) V+ (BRN) V- (BLU) ESM-680S15AMG Unspecified tolerance:±1 PROJ: INPUT(UL SOOW 17AWG/3C & VDE H07RN-F 3*1.0mm2 9.8) DIMMING(UL21996 22AWG/3C 5.0) OUTPUT(UL SJTW 14AWG/2C 8.8) Tc L (BRN) N (BLU) (YLW/GRN) Vaux (BLK/WHT) Dim+ (PUR) Dim- (PNK) V+ (RED) V- (BLU)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESM-680S170MT/ESM-680S240MT Unspecified tolerance:±1 PROJ: INPUT(UL STW 18AWG/3C 9.5) DIMMING(UL21996 22AWG/3C 5.0) OUTPUT(UL STW 18AWG/2C 8.9) Tc L1/L (BRN) L2/N (ORG/GRY) (YLW/GRN) V+ (RED) V- (BLU) Vaux (BLK/WHT) Dim+ (PUR) Dim- (PNK) ESM-680S350MT/ESM-680S560MT/ESM-680S840MT Unspecified tolerance:±1 PROJ: INPUT(UL STW 18AWG/3C 9.5) DIMMING(UL21996 22AWG/3C 5.0) OUTPUT(UL SJTW 18AWG/2C 7.3) Tc L1/L (BRN) L2/N (ORG/GRY) (YLW/GRN) V+ (RED) V- (BLU) Vaux (BLK/WHT) Dim+ (PUR) Dim- (PNK)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESM-680S15AMT Unspecified tolerance:±1 PROJ: INPUT(UL STW 18AWG/3C 9.5) DIMMING(UL21996 22AWG/3C 5.0) OUTPUT(UL SJTW 14AWG/2C 8.8) Tc L1/L (BRN) L2/N (ORG/GRY) (YLW/GRN) V+ (RED) V- (BLU) Vaux (BLK/WHT) Dim+ (PUR) Dim- (PNK) RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 680W Programmable Driver with INV Digital Dimming ESM-680SxxxMx Rev.F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2021-04-20 A Datasheet Release / / 2021-05-28 B Programming Connection Diagram / Updated 2021-11-04 C UKCA logo / Added General Specifications Lifetime Updated Safety &EMC Compliance UKCA Added Dimming PWM Dimming Updated Programming Connection Diagram ESM-680SxxxMT Updated Mechanical Outline ESM-680S170/240MT Updated Mechanical Outline ESM-680S350/560/840MT Updated Mechanical Outline ESM-680S15AMT Updated 2022-01-08 D Product Photograph / Updated EAC logo / Added Safety &EMC Compliance EAC Added 2022-09-22 E General Specifications / Updated 2023-07-06 F Product Photograph / Updated Safety &EMC Compliance / Updated Dimming / Updated Programming Connection Diagram / Updated Mechanical Outline / Updated