ESM-320SXXXDX INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 15
Technical content
Features
Description
The ESM-320SxxxDx series is a 320W, constant-current, programmable and IP66/IP67 rated LED driver that operates from 249-528Vac input with excellent power factor. It is created for many lighting applications including high bay, high mast, aquaculture and sport, etc. The high effic iency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range(1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Typical Power Factor Model Number (5) 277Vac 480Vac 70-1050mA 700-1050mA 700 mA 249~528 Vac/ 352~500 Vdc 153~457Vdc 320 W 95.0% 0.99 0.96 ESM-320S105Dx 105-1500mA 1050-1500mA 1400 mA 249~528 Vac/ 352~500 Vdc 107~305Vdc 320 W 95.0% 0.99 0.96 ESM-320S150Dx 175-2500mA 1750-2500mA 2100 mA 249~528 Vac/ 352~500 Vdc 64~183 Vdc 320 W 95.0% 0.99 0.96 ESM-320S250Dx 285-5000mA 2850-5000mA 4900 mA 249~528 Vac/ 352~500 Vdc 32~112 Vdc 320 W 94.5% 0.99 0.96 ESM-320S500Dx (4) 535-7600mA 5350-7600mA 6700 mA 249~528 Vac/ 352~500 Vdc 21 ~ 60 Vdc 320 W 93.5% 0.99 0.96 ESM-320S760Dx (4) Notes: (1) Output current range with constant power at 320W (2) Certified input voltage range: 277-480Vac. (3) Measured at 100% load and 480Vac input (see below “General Specifications” for details). (4) SELV output. (5) x = G are UL Recognized and ENEC, etc. models; x = T are UL Class P models. Full Power at Wide Output Current Range (Constant Power) Adjustable Output Current (AOC) with Programmability Isolated 1-10V/10V PWM/3-Timer-Modes Dimmable Output Lumen Compensation End-of-Life Indicator Input Surge Protection: DM 6kV, CM 10kV All-Around Protection: OVP, SCP, OTP IP66/IP67 and UL Dry/Damp/Wet Location TYPE HL, for Use in a Class I, Division 2 Hazardous (Classified) Location 5 Year Warranty
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com I-V Operation Area ESM-320S105Dx ESM-320S150Dx Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area Programmed Operating Area Note: 700mA≤Ioset≤1050 mA (420,457)(70,457) 160 240 320 400 480 0 200 400 600 800 1000 1200 (700,457) (1050,305) 60%Load (1050,153) (Ioset,320 /Ioset)(10%Ioset,320/Ioset) (1050,183) 100%Load Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area Programmed Operating Area Note: 1050 mA≤Ioset≤1500mA (630,305)(105,305) 120 180 240 300 360 0 300 600 900 1200 1500 1800 (1050,305) (1500,213) 100%Load 60%Load (1500,107) (Ioset,320/Ioset)(10%Ioset,320/Ioset) (1500,128) ESM-320S250Dx ESM-320S500Dx Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area Programmed Operating Area Note: 1750mA≤Ioset≤2500mA 105 140 175 210 0 500 1000 1500 2000 2500 3000 (1750,183) (2500,128) 100%Load 60%Load (2500,64) (Ioset,320/Ioset)(10%Ioset,320/Ioset) (250,64) (Ioset,64) (2500,77) Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area Programmed Operating Area Note: 2850mA≤Ioset≤5000mA 100 120 0 900 1800 2700 3600 4500 5400 (2850,112) (5000,64) 60%Load (5000,32) (Ioset,320/Ioset)(10%Ioset,320/Ioset) (500,32) (Ioset,32) (5000,38) 100%Load ESM-320S760Dx Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area Programmed Operating Area Note: 5350 mA≤Ioset≤7600 mA (3210,60)(535,60) 0 1500 3000 4500 6000 7500 9000 (5350,60) (7600,42) 60%Load (7600,21) (Ioset,320 /Ioset)(10%Ioset,320/Ioset) (760,21) (Ioset,21) (7600,25) 100%Load
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications Parameter Min. Typ. Max. Notes Input AC Voltage 249 Vac - 528 Vac Input DC Voltage 352 Vdc 500 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL 8750; 480Vac/60Hz - - 0.70 mA IEC 60598-1; 480Vac/60Hz Input AC Current - - 1.38 A Measured at 100% load and 277 Vac input. - - 0.81 A Measured at 100% load and 480 Vac input. Inrush Current(I2t) - - 1.409 A 2s At 480Vac input, 25C cold start, duration=4.56 ms, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.9 - - At 277-480Vac, 50-60Hz, 60%-100% Load Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset At 100% load condition Output Current Setting(Ioset) Range ESM-320S105Dx ESM-320S150Dx ESM-320S250Dx ESM-320S500Dx ESM-320S760Dx 70 mA 105 mA 175 mA 285 mA 535 mA 1050 mA 1500 mA 2500 mA 5000 mA 7600 mA Output Current Setting Range with Constant Power ESM-320S105Dx ESM-320S150Dx ESM-320S250Dx ESM-320S500Dx ESM-320S760Dx 700 mA 1050 mA 1750 mA 2850 mA 5350 mA 1050 mA 1500 mA 2500 mA 5000 mA 7600 mA Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax At 100% load condition. 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - 2%Iomax - At 100% load condition. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10%Iomax At 100% load condition No Load Output Voltage ESM-320S105Dx ESM-320S150Dx ESM-320S250Dx ESM-320S500Dx ESM-320S760Dx 500 V 340 V 210 V 120 V 70 V Line Regulation - - ±0.5% Measured at 100% load Load Regulation - - ±1.5%
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Output Specifications (Continued) Parameter Min. Typ. Max. Notes Turn-on Delay Time - - 0.5 s Measured at 277-480Vac input, 60%-100%load Temperature Coefficient of Ioset - 0.03%/C - Case temperature = 0C~Tc max General Specifications Parameter Min. Typ. Max. Notes Efficiency at 277 Vac input: ESM-320S105Dx Io= 700 mA Io=1050 mA ESM-320S150Dx Io=1050 mA Io=1500 mA ESM-320S250Dx Io=1750 mA Io=2500 mA ESM-320S500Dx Io=2850 mA Io=5000 mA ESM-320S760Dx Io=5350 mA Io=7600 mA 92.0% 91.0% 92.0% 92.0% 92.0% 91.0% 91.5% 90.0% 90.5% 90.0% 94.0% 93.0% 94.0% 94.0% 94.0% 93.0% 93.5% 92.0% 92.5% 92.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 400 Vac input: ESM-320S105Dx Io= 700 mA Io=1050 mA ESM-320S150Dx Io=1050 mA Io=1500 mA ESM-320S250Dx Io=1750 mA Io=2500 mA ESM-320S500Dx Io=2850 mA Io=5000 mA ESM-320S760Dx Io=5350 mA Io=7600 mA 93.0% 92.0% 92.5% 92.5% 93.0% 92.0% 92.5% 90.5% 91.5% 90.5% 95.0% 94.0% 94.5% 94.5% 95.0% 94.0% 94.5% 92.5% 93.5% 92.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 480 Vac input: ESM-320S105Dx Io= 700 mA Io=1050 mA ESM-320S150Dx Io=1050 mA Io=1500 mA ESM-320S250Dx Io=1750 mA Io=2500 mA ESM-320S500Dx Io=2850 mA Io=5000 mA ESM-320S760Dx Io=5350 mA Io=7600 mA 93.0% 92.0% 93.0% 92.5% 93.0% 92.0% 92.5% 90.5% 91.5% 91.5% 95.0% 94.0% 95.0% 94.5% 95.0% 94.0% 94.5% 92.5% 93.5% 93.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes MTBF - 296,000 Hours - Measured at 480Vac input, 80%load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 104,000 Hours - Measured at 480Vac input, 80%load and 70C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90°C Operating Case Temperature for Warranty Tc_w -40°C - +80C Case temperature for 5 years warranty Humidity: 10% RH to 95% RH Storage Temperature -40°C - +8 5°C Humidity: 5%RH to 95%RH Dimensions: Inches (L × W × H) Millimeters (L × W × H) 8.82 × 3.15 × 1.75 224 × 80 × 44.5 With mounting ear 9.57 × 3.15 × 1.75 243 × 80 × 44.5 Net Weight - 1530 g - Dimming Specifications Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 200 μA 300 μA 450 μA Vdim(+) = 0 V Dimming Output Range ESM-320S105Dx ESM-320S150Dx ESM-320S250Dx ESM-320S500Dx ESM-320S760Dx 10%Ioset - Ioset 700 mA ≤ Ioset ≤ 1050 mA 1050 mA ≤ Ioset ≤ 1500 mA 1750 mA ≤ Ioset ≤ 2500 mA 2850 mA ≤ Ioset ≤ 5000 mA 5350 mA ≤ Ioset ≤ 7600 mA ESM-320S105Dx ESM-320S150Dx ESM-320S250Dx ESM-320S500Dx ESM-320S760Dx 70 mA 105 mA 175 mA 285 mA 535 mA - Ioset 70 mA ≤ Ioset ＜ 700 mA 105 mA ≤ Ioset ＜ 1050 mA 175 mA ≤ Ioset ＜ 1750 mA 285 mA ≤ Ioset ＜ 2850 mA 535 mA ≤ Ioset ＜ 5350 mA Recommended Dimming Range for 1-10V 1 V - 9 V Default 1-10V dimming mode with positive logic. PWM_in High Level - 10 V - PWM_in Low Level - 0 V - PWM_in Frequency Range 200 Hz - 2 KHz PWM_in Duty Cycle 0% - 100%
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Safety &EMC Compliance Safety Category Standard UL/CUL UL 8750,CAN/C SA-C22.2 No. 250.13 ENEC & CE EN 61347-1, EN 61347-2-13 UKCA BS EN 61347-1, BS EN 61347-2-13 CB IEC 61347-1, IEC 61347-2-13 EAC TP TC 004, TP TC 020 Performance Standard ENEC EN 62384 EMI Standards Notes BS EN/EN IEC 55015(1) Conducted emission Test &Radiated emission Test BS EN/EN IEC 61000-3-2 Harmonic current emissions BS EN/EN 61000-3-3 Voltage fluctuations & flicker FCC Part 15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interfere nce, and [2] this device must accept any interference received, including interference that may cause undesired operation. EMS Standards Notes BS EN/EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air disc harge, 4 kV contact discharge BS EN/EN 61000-4-3 Radio-Frequency Electromagnetic Field Suscep tibility Test-RS BS EN/EN 61000-4-4 Electrical F ast Transient / Burst-EFT BS EN/EN 61000-4-5 Surge Immunity T est: AC Power Line: Differential Mode 6 kV, Common Mode 10 kV BS EN/EN 61000-4-6 Conducted Radio Frequency Disturbances Test- CS BS EN/EN 61000-4-8 Power Frequency Magnetic Field Test BS EN/EN 61000-4-11 Voltage Dips BS EN/EN 61547 Electromagnetic Im munity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Lifetime vs. Case Temperature Inrush Current Waveform Efficiency vs. Load ESM-320S105Dx(Io=700mA) ESM-320S105Dx(Io=1050mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESM-320S150Dx(Io=1050mA) ESM-320S150Dx(Io=1500mA) ESM-320S250Dx(Io=1750mA) ESM-320S250Dx(Io=2500mA) ESM-320S500Dx(Io=2850mA) ESM-320S500Dx(Io=5000mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESM-320S760Dx(Io=5350mA) ESM-320S760Dx(Io=7600mA) Power Factor Total Harmonic Distortion
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Protection Functions Parameter Notes Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Short Circuit Protection Auto Recovery. No damage will occur when any output is short ci rcuited. The output shall return to normal when the fault condition is removed. Over Temperature Protection Decreases output current, returning to normal after over temperature is removed. Dimming 1-10V Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Dimmer Inventronics LED Driver L VprgN Vac Implementation 1: Positive logic Dim+ Dim- Dimmer Inventronics LED Driver L VprgN Vac Implementation 2: Negative logic Notes: 1. Do NOT connect Dim− to the out put V− or V+, otherwise the driver will not work properly. 2. The dimmer can also be replac ed by an active 1-10V voltage source signal or passive components like zener. 3. When 1-10V negative logic di mming mode and Dim+ is open, the driver will output minimum current.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 10V PWM Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Inventronics LED Driver V-L N Vac Vprg PWM Signal Implementation 3: Positive logic Dim+ Dim- Inventronics LED Driver V-L N Vac Vprg PWM Signal Implementation 4: Negative logic Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. When 10V PWM negative logic di mming mode and Dim+ is open, the driver will output minimum current. Time Dimming Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self Adapting- Percentage and Traditional Timer. Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two days (if difference <15 minutes), assuming that the center point of the dimming curve is midnight local time. Self Adapting-Percentage: Automatically adjusts the on-time of each step by a constant percentage = (actual on-time for the past 2 days if difference <15 min) / (programmed on-time from the dimming curve). Traditional Timer: Follows the programmed timing curve after power on with no changes. Output Lumen Compensation Output Lumen Compensation (OLC) may be used to maintain constant light output over the life of the LEDs by driving them at a reduced current when new, then gradually i ncreasing the drive current over time to counteract LED lumen degradation.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com End Of Life End-of-Life (EOL) is providing a visual notification to a user that the LED module has reached the end of manufacturer-specified life and that the replacement is recommended. Once active, an indication is given at each power-up of the driver, which the driver indicates this th rough a lower light output during the first 1 minute before normal operation is continued. Programming Connection Diagram Note: The driver does not need to be powered on during the programming process. Please refer to PRG-MUL2 (Programmer) datasheet for details. Mechanical Outline ESM-320S105DG/ESM-320S150DG Unspecified tolerance:±1 PROJ: INPUT(UL SOOW 17AWG/3C & VDE H07RN-F 3*1.0mm 2 9.8) DIMMING(UL21996 22AWG/3C 5.0) OUTPUT(UL SOOW 17AWG/2C & VDE H07RN-F 2*1.0mm 2 9.3) TcL (BRN) N (BLU) (YLW/GRN) Vprg (BLK/WHT) Dim+ (PUR) Dim- (PNK) V+ (BRN) V- (BLU)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESM-320S250DG/ESM-320S500DG/ESM-320S760DG Unspecified tolerance:±1 PROJ: DIMMING(UL21996 22AWG/3C 5.0)INPUT(UL SOOW 17AWG/3C & VDE H07RN-F 3*1.0mm2 9.8) OUTPUT(UL SJOW 17AWG/2C & VDE H05RN-F 2*1.0mm2 7.8) Tc L (BRN) N (BLU) (YLW/GRN) Vprg (BLK/WHT) Dim+ (PUR) Dim- (PNK) V+ (BRN) V- (BLU) ESM-320S105DT/ESM-320S150DT Unspecified tolerance:±1 PROJ: INPUT(UL STW 18AWG/3C 9.5) DIMMING(UL21996 22AWG/3C 5.0) OUTPUT(UL STW 18AWG/2C 8.9) Tc L1/L (BRN) L2/N (ORG/GRY) (YLW/GRN) V+ (RED) V- (BLU) Vprg (BLK/WHT) Dim+ (PUR) Dim- (PNK)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESM-320S250DT/ESM-320S500DT/ESM-320S760DT Unspecified tolerance:±1 PROJ: DIMMING(UL21996 22AWG/3C 5.0)INPUT(UL STW 18AWG/3C 9.5) OUTPUT(UL SJTW 18AWG/2C 7.3) Tc L1/L (BRN) L2/N (ORG/GRY) (YLW/GRN) V+ (RED) V- (BLU) Vprg (BLK/WHT) Dim+ (PUR) Dim- (PNK) RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 320W Programmable IP66/IP67 Driver ESM-320SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2020-08-17 A Datasheet Release / / 2022-01-08 B UKCA / EAC logo / Added Safety &EMC Compliance / Added Programming Connection Diagram / Updated Mechanical Outline ESM-320SxxxDT Updated 2023-07-05 C Product Photograph / Updated Safety &EMC Compliance / Updated Dimming / Updated Programming Connection Diagram / Updated Mechanical Outline / Updated