ESM-240SXXXLX INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
Features
Description
The ESM-240SxxxLx series is a 240W, constant-current, NFC programmable and IP66/IP67 rated LED driver that operates from 249-528Vac input with excellent power factor. Cre ated for smart lighting and health monitoring applications, this family provides integrated AC power monitori ng with an auxiliary voltage and dim-to-off functionality for powering low voltage, wireless controls. The dimming control supports 0-10V dimming as well as two-way communication via Digital Dimming, a UART based communi cation protocol that complies with T/CSA- 0 5 1 . T h e h i g h e f f i c i e n c y o f t h e s e d r i v e r s a n d c o m p a c t m e t a l c a se enables them to run cooler, significantly improving reliability and extending product life. To ensure tro uble-free operation, protection is provided against input surge, input under voltage, input over voltage, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range (1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Typical Power Factor Model Number (5) 277Vac 480Vac 70-1050mA 700-1050mA 700 mA 249~528 Vac/ 352~500 Vdc 115~343Vdc 240W 94.0% 0.99 0.96 ESM-240S105Lx 105-1500mA 1050-1500mA 1050 mA 249~528 Vac/ 352~500 Vdc 80~229 Vdc 240W 93.5% 0.99 0.96 ESM-240S150Lx 215-3500mA 2150-3500mA 2150 mA 249~528 Vac/ 352~500 Vdc 35~111 Vdc 240W 93.0% 0.99 0.96 ESM-240S350Lx (4) 420-6700mA 4200-6700mA 4900 mA 249~528 Vac/ 352~500 Vdc 18 ~ 57 Vdc 240W 92.5% 0.99 0.96 ESM-240S670Lx (4) Notes: (1) Output current range with constant power at 240W (2) Certified input voltage range: 277-480Vac. (3) Measured at 100% load and 480Vac input (see below “General Specifications” for details). (4) SELV Output. (5) x = G are UL Recognized and ENEC, etc. models; x = T are UL Class P models. Full Power at Wide Output Cur rent Range (Constant Power) Adjustable Output Current (AOC) with NFC Isolated 0-10V/PWM/3-Timer-Modes Dimmable INV Digital Dimming, UART Based Communication Protocol Compliant with T/CSA-051 Dim-to-Off with Standby Power Always-on Auxiliary Power: 12Vdc,250mA,3W (Transient Peak Power up to 10W) Integrated Power Metering wi th High Accuracy up to ±1% Output Lumen Compensation End-of-Life Indicator Thermal Sensing and Protection for LED Module Input Surge Protection: DM 6kV, CM 10kV All-Around Protection: IUVP, IOVP, OVP, SCP, OTP IP66/IP67 and UL Dry/Damp/Wet Location TYPE HL, for Use in a Class I, Division 2 Hazardous (Classified) Location 5 Years Warranty
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com I-V Operation Area ESM-240S105Lx ESM-240S150Lx Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area Programmed Operating Area Note: 700mA≤Ioset≤1050 mA (420,343)(70,343) 120 180 240 300 360 0 200 400 600 800 1000 1200 (700,343) (1050,229) 100%Load 60%Load (1050,115) (Ioset,240/Ioset)(10%Ioset,240/Ioset) (1050,137) (630,229)(105,229) (1500,96) 100 150 200 250 300 0 300 600 900 1200 1500 1800 Output Voltage(V) Output Current (mA) (1050,229) (1500,160) (10%Ioset,240/Ioset) (Ioset,240/Ioset) Good Performance Area Allowed Operating Area (1500,80) Programmed Operating Area Note: 1050mA≤Ioset≤1500 mA (150,80) (Ioset,80) 100%Load60%Load ESM-240S350Lx ESM-240S670Lx (3500,41) 100 120 0 700 1400 2100 2800 3500 4200 Output Voltage(V) (2150,111) (3500,69) (10%Ioset,240/Ioset) (Ioset,240/Ioset) 60%Load Good Performance Area Allowed Operating Area (3500,35) Programmed Operating Area (350,35) (Ioset,35) Output Current (mA) Note: 2150mA≤Ioset≤3500mA 100%Load Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area Programmed Operating Area Note: 4200 mA≤Ioset≤6700mA (2520,57)(420,57) 0 1250 2500 3750 5000 6250 7500 (4200,57) (6700,36) 100%Load 60%Load (6700,18) (Ioset,240 /Ioset)(10%Ioset,240/Ioset) (670,18) (Ioset,18) (6700,22) Input Specifications Parameter Min. Typ. Max. Notes Input AC Voltage 249 Vac - 528 Vac Input DC Voltage 352 Vdc - 500 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL 8750; 480Vac/ 60Hz - - 0.70 mA IEC 60598-1; 480Vac/ 60Hz Input AC Current - - 1.10 A Measured at 100% load and 277 Vac input. - - 0.65 A Measured at 100% load and 480 Vac input. Inrush Current(I2t) - - 2.10 A 2s At 480Vac input, 25C cold start, duration=520 μs, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications (Continued) Parameter Min. Typ. Max. Notes PF 0.9 - - At 277-480Vac, 50-60Hz, 60%-100% Load Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset At 100% load condition Output Current Setting(Ioset) Range ESM-240S105Lx ESM-240S150Lx ESM-240S350Lx ESM-240S670Lx 70 mA 105 mA 215 mA 420 mA 1050 mA 1500 mA 3500 mA 6700 mA Output Current Setting Range with Constant Power ESM-240S105Lx ESM-240S150Lx ESM-240S350Lx ESM-240S670Lx 700 mA 1050 mA 2150 mA 4200 mA 1050 mA 1500 mA 3500 mA 6700 mA Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax At 100% load condition. 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - 2%Iomax - At 100% load condition. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10%Iomax At 100% load condition No Load Output Voltage ESM-240S105Lx ESM-240S150Lx ESM-240S350Lx ESM-240S670Lx 400 V 290 V 120 V 75 V Line Regulation - - ±0.5% Measured at 100% load Load Regulation - - ±3.0% Turn-on Delay Time - - 0.5 s Measured at 277-480Vac input, 60%-100% Load Temperature Coefficient of Ioset - 0.03%/C - Case temperature = 0C ~Tc max 12V Auxiliary Output Voltage 10.8 V 12 V 13.2 V 12V Auxiliary Output Source Current 0 mA - 250 mA Return terminal is “Dim−“ 12V Auxiliary Output Transient Peak Current@ 6W - - 500 mA 500mA peak for a maximum duration of 2.2ms in a 6.0ms period during which time the average should not exceed 250mA. 12V Auxiliary Output Transient Peak Current@10W - - 850 mA 850mA peak for a maximum duration of 1.3ms in a 5.2ms period during which time the average should not exceed 250mA.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications Parameter Min. Typ. Max. Notes Efficiency at 277 Vac input: ESM-240S105Lx Io= 700 mA Io=1050 mA ESM-240S150Lx Io=1050 mA Io=1500 mA ESM-240S350Lx Io=2150 mA Io=3500 mA ESM-240S670Lx Io=4200 mA Io=6700 mA 90.5% 91.0% 90.0% 90.0% 90.0% 88.5% 89.5% 87.5% 92.5% 93.0% 92.0% 92.0% 92.0% 90.5% 91.5% 89.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 400 Vac input: ESM-240S105Lx Io= 700 mA Io=1050 mA ESM-240S150Lx Io=1050 mA Io=1500 mA ESM-240S350Lx Io=2150 mA Io=3500 mA ESM-240S670Lx Io=4200 mA Io=6700 mA 91.5% 91.5% 91.5% 91.0% 91.0% 89.5% 90.5% 88.5% 93.5% 93.5% 93.5% 93.0% 93.0% 91.5% 92.5% 90.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 480 Vac input: ESM-240S105Lx Io= 700 mA Io=1050 mA ESM-240S150Lx Io=1050 mA Io=1500 mA ESM-240S350Lx Io=2150 mA Io=3500 mA ESM-240S670Lx Io=4200 mA Io=6700 mA 91.5% 92.0% 91.5% 91.0% 91.0% 89.5% 90.5% 89.0% 93.5% 94.0% 93.5% 93.0% 93.0% 91.5% 92.5% 91.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Power Metering Accuracy -1% - 1% At 100% load condition Standby Power - 1.5 W - Measured at 480Vac/50Hz; Dimming off MTBF - 203,000 Hours - Measured at 480Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 106,000 Hours - Measured at 480Vac input, 80%Load and 70C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90°C Operating Case Temperature for Warranty Tc_w -40°C - +80°C Case temperature for 5 years warranty Humidity: 10% RH to 95% RH Storage Temperature -40°C - +8 5°C Humidity: 5%RH to 95%RH
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes Dimensions Inches (L × W × H) Millimeters (L × W × H) 7.91 × 3.01 × 1.52 201 × 76.5 × 38.5 With mounting ear 8.58 × 3.01 × 1.52 218 × 76.5 × 38.5 Net Weight - 1200 g - Dimming Specifications Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 200 uA 300 uA 450 uA Vdim(+) = 0 V Dimming Output Range ESM-240S105Lx ESM-240S150Lx ESM-240S350Lx ESM-240S670Lx 10%Ioset - Ioset 700 mA ≤ Ioset ≤ 1050 mA 1050 mA ≤ Ioset ≤ 1500 mA 2150 mA ≤ Ioset ≤ 3500 mA 4200 mA ≤ Ioset ≤ 6700 mA ESM-240S105Lx ESM-240S150Lx ESM-240S350Lx ESM-240S670Lx 70 mA 105 mA 215 mA 420 mA - Ioset 70 mA ≤ Ioset ＜ 700 mA 105 mA ≤ Ioset ＜ 1050 mA 215 mA ≤ Ioset ＜ 2150 mA 420 mA ≤ Ioset ＜ 4200 mA Recommended Dimming Input Range 0 V - 10 V Default 0-10V dimming mode. Dim off Voltage 0.35 V 0.5 V 0.65 V Dim on Voltage 0.55 V 0.7 V 0.85 V Hysteresis - 0.2 V - PWM_in High Level 3 V - 10 V Dimming mode set to PWM in Inventronics Programing Software. PWM_in Low Level -0.3 V - 0.6 V PWM_in Frequency Range 200 Hz - 3 KHz PWM_in Duty Cycle 1% - 99% PWM Dimming off (Positive Logic) 3% 5% 8% PWM Dimming on (Positive Logic) 5% 7% 10% PWM Dimming off ( Negative Logic) 92% 95% 97% PWM Dimming on ( Negative Logic) 90% 93% 95% Hysteresis - 2% -
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Safety &EMC Compliance Safety Category Standard UL/CUL UL 8750,CAN/C SA-C22.2 No. 250.13 ENEC EN 61347-1, EN 61347-2-13 CE EN 61347-1, EN 61347-2-13 EN 301 489-1 EN 301 489-3 EN 300 330 EN 62479/EN 50663/EN 50665/EN 50364 UKCA BS EN 61347-1, BS EN 61347-2-13 BS EN 301 489-1 BS EN 301 489-3 BS EN 300 330 BS EN 62479/BS EN 50663/BS EN 50665/BS EN 50364 CB IEC 61347-1, IEC 61347-2-13 EAC TP TC 004, TP TC 020 Performance Standard ENEC EN 62384 EMI Standards Notes BS EN/EN IEC 55015(1) Conducted emission Test &Radiated emission Test BS EN/EN IEC 61000-3-2 Harmonic current emissions BS EN/EN 61000-3-3 Voltage fluctuations & flicker FCC Part 15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interfere nce, and [2] this device must accept any interference received, including interference that may cause undesired Operation. EMS Standards Notes BS EN/EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air disc harge, 4 kV contact discharge BS EN/EN 61000-4-3 Radio-Frequency Electromagnetic Field Suscep tibility Test-RS BS EN/EN 61000-4-4 Electrical Fast Transient / Burst-EFT BS EN/EN 61000-4-5 Surge Immunity Test: AC Power Line: Differen tial Mode 6 kV, Common Mode 10 kV BS EN/EN 61000-4-6 Conducted Radio Frequency Disturbances Test- CS BS EN/EN 61000-4-8 Power Frequency Magnetic Field Test BS EN/EN 61000-4-11 Voltage Dips BS EN/EN 61547 Electromagnetic Im munity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Lifetime vs. Case Temperature Inrush Current Waveform Efficiency vs. Load ESM-240S105Lx(Io=700mA) ESM-240S105Lx(Io=1050mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESM-240S150Lx(Io=1050mA) ESM-240S150Lx(Io=1500mA) ESM-240S350Lx(Io=2150mA) ESM-240S350Lx(Io=3500mA) ESM-240S670Lx(Io=4200mA) ESM-240S670Lx(Io=6700mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Power Factor Total Harmonic Distortion Protection Functions Parameter Min. Typ. Max. Notes External Thermal Protection R1 (Start derating) - 1.67 kΩ - The output current starts to decrease linearly when the actual NTC resistance value is lower than R1, until R2 is reached. R2 (Stop derating) - 1.27 kΩ - When the actual NTC resistance value is lower than R2, the output current will stay at the programmed Protection Current Floor. Protection Current Setting Range 10%Ioset 20%Ioset 100%Ioset 10%I oset > Iomin (default setting is 20%) Iomin 20%Ioset 100%Ioset 10%Ioset ≤ Iomin (default setting is 2 0%) Over Temperature Protection Decreases output current, returning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Protection Functions (Continued) Parameter Min. Typ. Max. Notes Input Under Voltage Protection (IUVP) Input Under Voltage Protection
220 Vac 230 Vac 240 Vac Turn off the output when the input voltage
exceeds protection voltage. Input Under Voltage Recovery
230 Vac 240 Vac 250 Vac
Auto Recovery. The driver will restart when the input voltage falls below recovery voltage. Input Over Voltage Protection Input Over Voltage Protection
550 Vac 570 Vac 590 Vac Turn off the output when the input voltage
exceeds protection voltage. Input Over Voltage Recovery
530 Vac 550 Vac 570 Vac
Auto Recovery. The driver will restart when the input voltage falls below recovery voltage. Max. of Input Over Voltage - - 590 Vac The driver can survive for 8 hours with input voltage stress of 590Vac. Note: (1) The recommended NTC type is 10kΩ NTC, Murata NCP18XH103J03RB. Input Under Voltage Protection Diagram
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Over Voltage Protection Diagram Dimming 0-10V Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Dimmer Inventronics LED Driver V-L OTP- N Vac Vaux OTP+ Implementation 1: Positive logic Dim+ Dim- Dimmer Inventronics LED Driver V-L OTP- N Vac Vaux OTP+ Implementation 2: Negative logic
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. The dimmer can also be replac ed by an active 0-10V voltage source signal or passive components like zener. 3. When 0-10V negative logic dimming mode and Dim+ is open, the driver will dim to off and be standby. PWM Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Inventronics LED Driver V-L OTP- N Vac Vaux OTP+ PWM Signal Implementation 3: Positive logic Dim+ Dim- Inventronics LED Driver V-L OTP- N Vac Vaux OTP+ PWM Signal Implementation 4: Negative logic Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. When PWM negative l ogic dimming mode and Dim+ is open, the driver will dim to off and be standby. Time Dimming Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self Adapting- Percentage and Traditional Timer. Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two days (if difference <15 minutes), assuming that the center poin t of the dimming curve is midnight local time. Self Adapting-Percentage: Automatically adjusts the on-time of each step by a constant percentage = (actual on-time for the past 2 days if difference <15 min) / (programmed on-time from the dimming curve). Traditional Timer: Follows the programmed timing curve after power on with no changes.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Output Lumen Compensation Output Lumen Compensation (OLC) may be used to maintain constant light output over the life of the LEDs by driving them at a reduced current when new, then gradually i ncreasing the drive current over time to counteract LED lumen degradation. End Of Life End-of-Life (EOL) is providing a visual notification to a user that the LED module has reached the end of manufacturer-specified life and that the replacement is recommended. Once active, an indication is given at each power-up of the driver, which the driver indicates this th rough a lower light output during the first 1 minute before normal operation is continued. Digital Dimming Inventronics Digital Dimming is a UART (Universal Asynchronous Receive Transmitter) based communication protocol and is compliant with T/CSA-051 standard . Please refer to Inventronics Digital Dimming file for details. Programming Connection Diagram Note: The driver does not need to be powered on during the programming process. Please refer to PRG-NFC-H or PRG-NFC-D2 (Programmer) datasheet for details.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Mechanical Outline ESM-240SxxxLG Unspecified tolerance:±1 PROJ: OUTPUT(UL SJOW 17AWG/2C & VDE H05RN-F 2*1.0mm 2 7.8) DIMMING(UL21996 22AWG/3C 5.0) OTP- OTP+ NC INPUT(UL SOOW 17AWG/3C & VDE H07RN-F 3*1.0mm2 9.8) Tc L (BRN) N (BLU) (YLW/GRN) Vaux (BLK/WHT) Dim+ (PUR) Dim- (PNK) V+ (BRN) V- (BLU) ESM-240SxxxLT Unspecified tolerance:±1 PROJ: OUTPUT(UL SJTW 18AWG/2C 7.3) DIMMING(UL21996 22AWG/3C 5.0) V+ (RED) V- (BLU) OTP- OTP+ NC Vaux (BLK/WHT) Dim+ (PUR) Dim- (PNK) INPUT(UL STW 18AWG/3C 9.5) Tc L1/L (BRN) L2/N (ORG/GRY) (YLW/GRN)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Optional Cable Parts CAB-OTPG Black Jacket Twisting and Tinning NC BLUE BROWN R E476885 TYPE 6P T h e e x t e r n a l t h e r m a l p r o t e c t i o n c a b l e u s e d f o r t h e E S M s e r i e s drivers can be supplied by Inventronics, please contact the sales for ordering if necessary. For the details of cable, please refer to CAB-OTPG (Cable) datasheet. RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/ 863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W NFC Driver with INV Digital Dimming ESM-240SxxxLx Rev.D www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2021-03-25 A Datasheets Release / / 2022-01-19 B UKCA / EAC logo / Added Models Notes Updated Safety &EMC Compliance / Updated Mechanical Outline / Updated 2022-04-02 C Product Photograph / Updated Features / Updated Output Specifications / Updated 2023-07-13 D Product Photograph / Updated Safety &EMC Compliance / Updated Dimming / Updated Mechanical Outline / Updated