ESM-1K2SXXXMGS INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 15
Technical content
Features
Description
The ESM-1K2SxxxMGS series is a 1200W, constant-current, programmable and IP66/IP67 rated LED driver that operates from 249-528Vac input with excellent power factor. Created for many lighting applications including high mast, sports, UV-LED, aquaculture and horticulture etc. It provides an auxiliary voltage and dim-to-off functionality for powering low voltage, wireless controls. The dimming contro l supports 0-10V dimming as well as two-way communication via Digital Dimming, a UART based communication protocol. The high efficiency of these drivers and compact metal case enables them to run cooler, significantl y improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, input under voltage, input over voltage, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range(1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Typical Power Factor Model Number 277Vac 480Vac 352~500Vdc 171 ~ 462Vdc 1200 W 96.5% 0.99 0.96 ESM-1K2S350MGS 352~500Vdc 114 ~ 304Vdc 1200 W 96.0% 0.99 0.96 ESM-1K2S525MGS 352~500Vdc 81 ~ 217Vdc 1200 W 96.5% 0.99 0.96 ESM-1K2S740MGS Panel mount connectors facilitates installation Brackets accommodates variety of hanging applications Ultra High Efficiency (Up to 96.0%) Full Power at Wide Output Cur rent Range (Constant Power) Adjustable Output Curren t (AOC) with Programmability Isolated 0-10V/PWM/3-Timer-Modes Dimmable INV Digital Dimming, UART Ba sed Communication Protocol Dim-to-Off with Low Standby Power Minimum Dimming Level wit h 5% or 10% Selectable Maximum Dimming Level wit h 9V or 10V Selectable Fade Time Adjustable Always-on Auxiliary P ower: 12Vdc, 250mA Low inrush current Output Lumen Compensation End-of-Life Indicator Input Surge Protection: DM 6kV, CM 10kV All-Around Protection: IUVP, IOVP, OVP, SCP, OTP IP66 / IP67 and UL Dry / Damp / Wet Location TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location 5 Years Warranty
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Notes: (1) Output current range with constant power at 1200W. (2) Certified voltage range: 277-480Vac (3) Measured at 100% load and 480Vac input (see below “General Specifications” for details). I-V Operating Area ESM-1K2S350MGS ESM-1K2S525MGS 186 279 372 465 558 0 700 1400 2100 2800 3500 4200 Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area (2600,462) (3500,343) Programmed Operating Area 60%Load (3500,206) (3500,171) Note: 2600mA≤Ioset≤3500mA (Ioset,1200/Ioset) (10%Ioset,1200/Ioset) 100%Load 122 183 244 305 366 0 1050 2100 3150 4200 5250 6300 Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area (3950,304) (5250,229) Programmed Operating Area 60%Load (5250,137) (5250,114) Note: 3950mA≤Ioset≤5250mA (Ioset,114)(525,114) (Ioset,1200/Ioset) (10%Ioset,1200/Ioset) 100%Load ESM-1K2S740MGS 132 176 220 264 0 1480 2960 4440 5920 7400 8800 Output Voltage(V) Output Current (mA) Good Performance Area Allowed Operating Area (5550,217) (7400,162) Programmed Operating Area 60%L oad (7400,97) (7400,81) Note: 5550mA≤Ioset≤7400mA (Ioset,81)(740,81) (Ioset,1200/Ioset) (10%Ioset,1200/Ioset) 100%Load Input Specifications Parameter Min. Typ. Max. Notes Input AC Voltage 249 Vac - 528 Vac Input DC Voltage 352 Vdc - 500 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL8750; 480Vac/ 60Hz - - 0.70 mA IEC60598-1; 480Vac/ 60Hz
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications (Continued) Parameter Min. Typ. Max. Notes Input AC Current - - 5.0 A Measured at 100% load and 277 Vac input. - - 2.95 A Measured at 100% load and 480 Vac input. Inrush Current(I2t) - - 4.20 A 2s At 480Vac input, 25 ℃ cold start, duration=12.7 ms, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.90 - - At 277-480Vac,50-60Hz,60%-100% Load (720 - 1200W) THD - - 20% Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset 100% load Output Current Setting(Ioset) Range ESM-1K2S350MGS ESM-1K2S525MGS ESM-1K2S740MGS 260 mA 395 mA 555 mA 3500 mA 5250 mA 7400 mA Output Current Setting Range with Constant Power ESM-1K2S350MGS ESM-1K2S525MGS ESM-1K2S740MGS 2600 mA 3950 mA 5550 mA 3500 mA 5250 mA 7400 mA Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax 100% load, 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - - 2%Iomax 100% load Startup Overshoot Current - - 10%Iomax 100% load No Load Output Voltage ESM-1K2S350MGS ESM-1K2S525MGS ESM-1K2S740MGS 500 V 340 V 240 V Line Regulation - - ±0.5% 100% load Load Regulation - - ±1.5% Turn-on Delay Time - - 0.5 s Measured at 277-480Vac input, 60%- 100% Load Temperature Coefficient of Ioset - 0.03%/C - Case temperature = 0C ~Tc max 12V Auxiliary Output Voltage 10.8 V 12 V 13.2 V 12V Auxiliary Output Source Current 0 mA - 250 mA Return terminal is “Dim−“ 12V Auxiliary Output Transient Peak Current@6W - - 500 mA 500mA peak for a maximum duration of 2.2 ms in a 6.0ms period during which time the average should not exceed 250mA. 12V Auxiliary Output Transient Peak Current@10W - - 850 mA 850mA peak for a maximum duration of 1.3 ms in a 5.2ms period during which time the average should not exceed 250mA.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications Parameter Min. Typ. Max. Notes Efficiency at 277 Vac input: ESM-1K2S350MGS Io= 2600 mA Io= 3500 mA ESM-1K2S525MGS Io= 3950 mA Io= 5250 mA ESM-1K2S740MGS Io= 5550 mA Io= 7400 mA 93.0% 93.0% 93.0% 92.5% 93.5% 93.0% 95.0% 95.0% 95.0% 94.5% 95.5% 95.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 400 Vac input: ESM-1K2S350MGS Io= 2600 mA Io= 3500 mA ESM-1K2S525MGS Io= 3950 mA Io= 5250 mA ESM-1K2S740MGS Io= 5550 mA Io= 7400 mA 94.0% 94.0% 94.0% 93.5% 94.0% 94.0% 96.0% 96.0% 96.0% 95.5% 96.0% 96.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 480 Vac input: ESM-1K2S350MGS Io= 2600 mA Io= 3500 mA ESM-1K2S525MGS Io= 3950 mA Io= 5250 mA ESM-1K2S740MGS Io= 5550 mA Io= 7400 mA 94.5% 94.0% 94.0% 94.0% 94.5% 94.0% 96.5% 96.0% 96.0% 96.0% 96.5% 96.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Standby Power - 1.5 W - Measur ed at 480Vac/50Hz; Dimming off MTBF - 207,000 Hours - Measured at 480Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 101,000 Hours - Measured at 480Vac input, 80%Load and 70C case temperature; See lifetime vs. Tc curve for the details - 54,000 Hours - Measured at 277Vac input, 100%Load and 40C ambient temperature Operating Case Temperature for Safety Tc_s -40°C - +90°C Operating Case Temperature for Warranty Tc_w -40°C - +80°C Case temperature for 5 years warranty Humidity: 10% RH to 95% RH Storage Temperature -40°C - + 85°C Humidity: 5%RH to 95%RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 305 × 166.5 × 49.5 With mounting ear 330 × 166.5 × 49.5 Net Weight - 4350 g -
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dimming Specifications Safety &EMC Compliance Safety Category Standard UL/CUL UL8750,CAN/C SA-C22.2 No. 250.13 ENEC & CE EN 61347-1, EN 61347-2-13 UKCA BS EN 61347-1, BS EN 61347-2-13 CB IEC 61347-1 , IEC 61347-2-13 EAC ГОСТ Р МЭК 61347-1, ГОСТ IEC 61347-2-13 Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 200 uA 300 uA 450 uA Vdim(+) = 0 V Dimming Output Range with 10%-100% (Default) ESM-1K2S350MGS ESM-1K2S525MGS ESM-1K2S740MGS 10%Ioset - Ioset 2600 mA ≤ Ioset ≤ 3500 mA 3950 mA ≤ Ioset ≤ 5250 mA 5550 mA ≤ Ioset ≤ 7400 mA ESM-1K2S350MGS ESM-1K2S525MGS ESM-1K2S740MGS 260 mA 395 mA 555 mA - Ioset 260 mA ≤ Ioset ＜ 2600 mA 395 mA ≤ Ioset ＜ 3950 mA 555 mA ≤ Ioset ＜ 5550 mA Dimming Output Range with 5%-100% (Settable) ESM-1K2S350MGS ESM-1K2S525MGS ESM-1K2S740MGS 10%Ioset - Ioset 2600 mA ≤ Ioset ≤ 3500 mA 3950 mA ≤ Ioset ≤ 5250 mA 5550 mA ≤ Ioset ≤ 7400 mA ESM-1K2S350MGS ESM-1K2S525MGS ESM-1K2S740MGS 130 mA 198 mA 278 mA - Ioset 260 mA ≤ Ioset ＜ 2600 mA 395 mA ≤ Ioset ＜ 3950 mA 555 mA ≤ Ioset ＜ 5550 mA Recommended Dimming Input Range 0 V - 10 V Default 0-10V dimming mode. Dim off Voltage 0.35 V 0.5 V 0.65 V Dim on Voltage 0. 55 V 0.7 V 0.85 V Hysteresis - 0.2 V - PWM_in High Level 3 V - 10 V Dimming mode set to PWM in PC interface. PWM_in Low Level -0.3 V - 0.6 V PWM_in Frequency Range 200 Hz - 3 KHz PWM_in Duty Cycle 1% - 99% PWM Dimming off (Positive Logic) 3% 5% 8% PWM Dimming on (Positive Logic) 5% 7% 10% PWM Dimming off ( Negative Logic) 92% 95% 97% PWM Dimming on ( Negative Logic) 90% 93% 95% Hysteresis - 2% -
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Safety &EMC Compliance (Continued) EMI Standards Notes BS EN/EN 55015(1) Conducted emission Test &Radiated emission Test BS EN/EN 61000-3-2 Harmonic current emissions BS EN/EN 61000-3-3 Voltage fluctuations & flicker FCC Part 15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation i s subject to the following two conditions: [1] this device may not cause harmful interference, and [2] this device must accept any interference received, including in terference that may cause undesired operation. EMS Standards Notes BS EN/EN 61000-4-2 Electrostati c Discharge (ESD): 8 kV air discharge, 4 kV contact discharge BS EN/EN 61000-4-3 Radio-Frequenc y Electromagnetic Field Susceptibility Test-RS BS EN/EN 61000-4-4 Electrical Fast Transient / Burst-EFT BS EN/EN 61000-4-5 Surge Immuni ty Test: AC Power Line: Differential Mode 6 kV, Common Mode 10 kV BS EN/EN 61000-4-6 Conducted Radi o Frequency Disturbances Test-CS BS EN/EN 61000-4-8 Power Frequency Magnetic Field Test BS EN/EN 61000-4-11 Voltage Dips BS EN/EN 61547 Electromagnetic I mmunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Lifetime vs. Case Temperature
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Inrush Current Waveform Efficiency vs. Load ESM-1K2S350MGS(lo=2600mA) ESM-1K2S350MGS(lo=3500mA) ESM-1K2S525MGS(lo=3950mA) ESM-1K2S525MGS(lo=5250mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESM-1K2S740MGS(lo=5550mA) ESM-1K2S740MGS(lo=7400mA) Power Factor Total Harmonic Distortion
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Protection Functions Parameter Min. Typ. Max. Notes Over Temperature Protection Decr eases output current, returning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short ci rcuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Input Under Voltage Protection (IUVP) Input Protection Voltage 220 Vac 230 Vac 240 Vac Turn off the output when the input voltage falls below protection voltage. Input Recovery Voltage 230 Vac 240 Vac 250 Vac Auto Recovery. The driver will restart when the input voltage exceeds recovery voltage. Input Over Voltage Protection (IOVP) Input Over Voltage Protection
550 Vac 570 Vac 590 Vac Turn off the output when the input voltage
exceeds protection voltage. Input Over Voltage Recovery
530 Vac 550 Vac 570 Vac
Auto Recovery. The driver will restart when the input voltage falls below recovery voltage. Max. of Input Over Voltage 590 Vac The driver can survive for 8 hours with a stable input voltage stress of 590Vac. Input Under Voltage Protection Diagram Io Protection Recovery
230 Vac 240 Vac
Input Over Voltage Protection Diagram Io Protection Recovery
550 Vac 570 Vac
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dimming 0-10V Dimming The recommended implementation of the dimming control is provided below. Implementation 1: Positive logic
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Implementation 2: Negative logic Notes: 1. Do NOT connect Dim− to the out put V− or V+, otherwise the driver will not work properly. 2. The dimmer can also be replac ed by an active 0-10V voltage source signal or passive components like zener. 3. When 0-10V negative logic di mming mode and Dim+ is open, the driver will dim to off and be standby. PWM Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Inventronics LED Driver V-L N G Vac Vaux PWM Signal Implementation 3: Positive logic
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dim+ Dim- Inventronics LED Driver V-L N G Vac Vaux PWM Signal Implementation 4: Negative logic Notes: 1. Do NOT connect Dim− to the out put V− or V+, otherwise the driver will not work properly. 2. When PWM negative l ogic dimming mode and Dim+ is open, the driver will dim to off and be standby. Time Dimming Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self Adapting Percentage and Traditional Timer. Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two days (if difference <15 minutes) , assuming that the center poin t of the dimming curve is midnight local time. Self Adapting-Percentage: Automatically adjusts the on-time of each step by a constant percentage = (actual on-time for the past 2 days if difference <15 min) / (programmed on-time from the dimming curve). Traditional Timer: Follows the programmed timing curve after power on with no changes. Output Lumen Compensation Output Lumen Compensation (OLC) may be used to maintain constant light output over the life of the LEDs by driving them at a reduced current when new, then gradually i ncreasing the drive current over time to counteract LED lumen degradation. Minimum Dimming Level with 5% or 10% Selectable The minimum dimming level can be set as 5% or 10% by Inventronics Multi Programmer,10% is default. Maximum Dimming Level with 9V or 10V Selectable The maximum dimming level can be set as corresponding dimming v oltage is 9V or 10V by Inventronics Multi Programmer,9V is default. Fade Time Adjustable Soft-start time and dimming slope can be adjusted by Inventronics Multi Programmer to get customized fade time experience, disable mode is default. End Of Life End-of-Life (EOL) is providing a visual notification to a user that the LED module has reached the end of manufacturer-specified life and that the replacement is recommended. Once active, an indication is given at each power-up of the driver, which the driver indicates this th rough a lower light output during the first 1 minute before normal operation is continued. Digital Dimming Inventronics Digital Dimming is a UART (Universal Asynchronous Receive Transmitter) based communication protocol. Please refer to Inventronics Digital Dimming file for details.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Programming Connection Diagram Note: The driver does not need to be powered on during the programming process. Please refer to PRG-MUL2 (Programmer) datasheet for details.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Mechanical Outline Unspecified tolerance:±1 PROJ: N/L2 L/L1 Vo+ Vo- GND Dim+ 12V Dim- Waterproof Cap Tc Note: This driver features UL Wet Location, IP67 panel mount connecto rs to streamline wiring in the field while still supporting stringent environmental conditions. The mating push-lock are not supplied by Inventronics. Please contact Wieland and Amphenol LTW or one of their suppliers for assistance sourcing the mating push-lock Location Series Rating voltage/current PN of connector on driver PN of mating push-lock Vin Wieland RST20i3 Vo ALTW X-Lok,C-Size 600V/10A ABAB-CAQ03000091 CC-03BFMB-QL8APA 300V/20A ABAB-CAQ03000100 CC-03BFMB-QL8APP Dim ALTW X-Lok,A-Size 300V/5A ABAB-AMQ03000091 AD-03BFFB-QL8AP0 Dim ALTW X-Lok,A-Size Waterproof Cap / CAP-WAAMQPC1 / RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/ 863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 1200W Programmable Driver with INV Digital Dimming ESM-1K2SxxxMGS Rev.B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2021-11-23 A Datasheet Release / / 2022-01-26 B Product Photograph / Updated EAC logo / Added Models I-V Operating Area Updated Safety &EMC Compliance / Updated