DS-ESM-075SXXXDV INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
Description
The ESM-075SxxxDx series is a 75W, constant-current, programmable and IP66/IP67 r a t e d L E D d r i v e r t h a t operates from 249-528Vac input with excellent power factor. It is created for many lighting applications including high bay, tunnel and roadway, etc. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range (1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Typical Power Factor Model Number (6) 277Vac 480Vac 70-1050mA 700-1050mA 700 mA 249~528 Vac/ 352~500 Vdc 36~107 Vdc 75W 91.0% 0.99 0.95 ESM-075S105Dx (4) 105-1500mA 1050-1500mA 1050 mA 249~528 Vac/ 352~500 Vdc 25~72 Vdc 75W 89.5% 0.99 0.95 ESM-075S150Dx (4) 140-2100mA 1400-2100mA 2100 mA 249~528 Vac/ 352~500 Vdc 18~54 Vdc 75W 89.0% 0.99 0.95 ESM-075S210Dx (5) Notes: (1) Output current range with constant power at 75W. (2) Certified input voltage range: 277-480Vac. (3) Measured at 100% load and 480Vac input (see below “General Specifications” for details). (4) SELV Output. (5) Class 2 & SELV output. (6) x = G are UL Recognized and ENEC, etc. models; x = T are UL Class P models. Full Power at Wide Output Current Range (Constant Power) Adjustable Output Current (AOC) with Programmability Isolated 1-10V/10V PWM/3-Timer-Modes Dimmable Output Lumen Compensation End-of-Life Indicator Input Surge Protection: DM 6kV, CM 10kV All-Around Protection: OVP, SCP, OTP IP66/IP67 and UL Dry/Damp/Wet Location TYPE HL, for use in a Class I, Division 2 Hazardous (Classified) Location 5 Years Warranty
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 75W Programmable IP66/IP67 Driver ESM-075SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com I-V Operation Area ESM-075S105Dx ESM-075S150Dx ESM-075S210Dx Input Specifications Parameter Min. Typ. Max. Notes Input AC Voltage 249 Vac - 528 Vac Input DC Voltage 352 Vdc - 500 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL 8750; 480Vac/ 60Hz - - 0.70 mA IEC 60598-1; 480Vac/ 60Hz Input AC Current - - 0.34 A Measured at 100% load and 277 Vac input. - - 0.20 A Measured at 100% load and 480 Vac input. Inrush Current(I2t) - - 0.89 A 2s At 480Vac input, 25C cold start, duration=252 μs, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. (1050 , 71 ) (1050 , 43 ) (420 , 107 ) (700 , 107 ) (Ioset,75/Ioset) (Ioset, 36)(105, 36) (10%Ioset,75/Ioset) (70, 107) (1050, 36) 110 132 0 210 420 630 840 1050 1260 Output Voltage(V) Output Current (mA) Note: 700mA≤Ioset≤1050mA Good Performance Area Programmed Operating Area Allowed Operating Area (1500 , 50 ) (1500 , 30 ) (630 , 72 ) (1050 , 72 ) (Ioset,75/Ioset) (Ioset, 25)(150, 25) (10%Ioset,75/Ioset) (105, 72) (1500, 25) 0 300 600 900 1200 1500 1800 Output Voltage(V) Output Current (mA) Note: 1050mA≤Ioset≤1500mA Good Performance Area Programmed Operating Area Allowed Operating Area (2100 , 36 ) (2100 , 21 ) (840 , 54 ) (1400 , 54 ) (Ioset,75/Ioset) (Ioset, 18)(210, 18) (10%Ioset,75/Ioset) (140, 54) (2100, 18) 0 420 840 1260 1680 2100 2520 Output Voltage(V) Output Current (mA) Note: 1400mA≤Ioset≤2100mA Good Performance Area Programmed Operating Area Allowed Operating Area
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 75W Programmable IP66/IP67 Driver ESM-075SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications (Continued) Parameter Min. Typ. Max. Notes PF 0.9 - - At 277-480Vac, 50-60Hz, 60%-100% Load Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset At 100% load condition Output Current Setting(Ioset) Range ESM-075S105Dx ESM-075S150Dx ESM-075S210Dx 70 mA 105 mA 140 mA 1050 mA 1500 mA 2100 mA Output Current Setting Range with Constant Power ESM-075S105Dx ESM-075S150Dx ESM-075S210Dx 700 mA 1050 mA 1400 mA 1050 mA 1500 mA 2100 mA Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax At 100% load condition. 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - 2%Iomax - At 100% load condition. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10%Iomax At 100% load condition No Load Output Voltage ESM-075S105Dx ESM-075S150Dx ESM-075S210Dx 120 V 90 V 60 V Line Regulation - - ±1% Measured at 100% load Load Regulation - - ±5% Turn-on Delay Time - - 0.5 s Measured at 277-480Vac input, 60%-100% Load Temperature Coefficient of Ioset - 0.06%/C - Case temperature = 0C ~Tc max General Specifications Parameter Min. Typ. Max. Notes Efficiency at 277 Vac input: ESM-075S105Dx Io= 700 mA Io=1050 mA ESM-075S150Dx Io=1050 mA Io=1500 mA ESM-075S210Dx Io=1400 mA Io=2100 mA 88.0% 88.5% 87.0% 87.0% 86.5% 86.5% 90.0% 90.5% 89.0% 89.0% 88.5% 88.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 75W Programmable IP66/IP67 Driver ESM-075SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes Efficiency at 400 Vac input: ESM-075S105Dx Io= 700 mA Io=1050 mA ESM-075S150Dx Io=1050 mA Io=1500 mA ESM-075S210Dx Io=1400 mA Io=2100 mA 88.5% 89.0% 87.0% 87.5% 87.0% 87.0% 90.5% 91.0% 89.0% 89.5% 89.0% 89.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 480 Vac input: ESM-075S105Dx Io= 700 mA Io=1050 mA ESM-075S150Dx Io=1050 mA Io=1500 mA ESM-075S210Dx Io=1400 mA Io=2100 mA 88.5% 89.0% 87.0% 87.5% 87.0% 87.0% 90.5% 91.0% 89.0% 89.5% 88.5% 89.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) MTBF - 302,000 Hours - Measured at 480Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 102,000 Hours - Measured at 480Vac input, 80%Load and 70C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90°C Operating Case Temperature for Warranty Tc_w -40°C - +80C Case temperature for 5 years warranty Humidity: 10%RH to 95%RH Storage Temperature -40°C - +8 5°C Humidity: 5%RH to 95%RH Dimensions: Inches (L × W × H) Millimeters (L × W × H) 4.92 × 2.66 × 1.52 125 × 67.5 × 38.5 With mounting ear 5.59 × 2.66 × 1.52 142 × 67.5 × 38.5 Net Weight - 710 g - Dimming Specifications Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 200 uA 300 uA 450 uA Vdim(+) = 0 V Dimming Output Range ESM-075S105DG ESM-075S150DG ESM-075S210DG 10%Ioset - Ioset 700 mA ≤ Ioset ≤ 1050 mA 1050 mA ≤ Ioset ≤ 1500 mA 1400 mA ≤ Ioset ≤ 2100 mA ESM-075S105DG ESM-075S150DG ESM-075S210DG 70 mA 105 mA 140 mA - Ioset 70 mA ≤ Ioset ＜ 700 mA 105 mA ≤ Ioset ＜ 1050 mA 140 mA ≤ Ioset ＜ 1400 mA Recommended Dimming Range for 1-10V 1 V - 9 V Default 1-10V dimming mode with positive logic.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 75W Programmable IP66/IP67 Driver ESM-075SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dimming Specifications (Continued) Safety &EMC Compliance Safety Category Standard UL/CUL UL 8750,CAN/C SA-C22.2 No. 250.13 ENEC & CE EN 61347-1, EN 61347-2-13 UKCA BS EN 61347-1, BS EN 61347-2-13 CB IEC 61347-1, IEC 61347-2-13 Performance Standard ENEC EN 62384 EMI Standards Notes BS EN/EN IEC 55015(1) Conducted emission Test &Radiated emission Test BS EN/EN IEC 61000-3-2 Harmonic current emissions BS EN/EN 61000-3-3 Voltage fluctuations & flicker FCC Part 15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interfere nce, and [2] this device must accept any interference received, including interference that may cause undesired Operation. EMS Standards Notes BS EN/EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air disc harge, 4 kV contact discharge BS EN/EN 61000-4-3 Radio-Frequency Electromagnetic Field Suscep tibility Test-RS BS EN/EN 61000-4-4 Electrical Fast Transient / Burst-EFT BS EN/EN 61000-4-5 Surge Immunity Test: AC Power Line: Differen tial Mode 6 kV, Common Mode 10 kV BS EN/EN 61000-4-6 Conducted Radio Frequency Disturbances Test- CS BS EN/EN 61000-4-8 Power Frequency Magnetic Field Test BS EN/EN 61000-4-11 Voltage Dips BS EN/EN 61547 Electromagnetic Im munity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Parameter Min. Typ. Max. Notes PWM_in High Level - 10V - PWM_in Low Level - 0V - PWM_in Frequency Range 200 Hz - 2 KHz PWM_in Duty Cycle 0% - 100%
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 75W Programmable IP66/IP67 Driver ESM-075SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Lifetime vs. Case Temperature Inrush Current Waveform Efficiency vs. Load ESM-075S105Dx(lo=700mA) ESM-075S105Dx(lo=1050mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 75W Programmable IP66/IP67 Driver ESM-075SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESM-075S150Dx(lo=1050mA) ESM-075S150Dx(lo=1500mA) ESM-075S210Dx(lo=1400mA) ESM-075S210Dx(lo=2100mA) Power Factor
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 75W Programmable IP66/IP67 Driver ESM-075SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Total Harmonic Distortion Protection Functions Parameter Notes Over Temperature Protection Decreases output current, returning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short ci rcuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Dimming 1-10V Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Dimmer Inventronics LED Driver L VprgN Vac Implementation 1: Positive logic
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 75W Programmable IP66/IP67 Driver ESM-075SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dim+ Dim- Dimmer Inventronics LED Driver L VprgN Vac Implementation 2: Negative logic Notes: 1. Do NOT connect Dim− to the out put V− or V+, otherwise the driver will not work properly. 2. The dimmer can also be replac ed by an active 1-10V voltage source signal or passive components like zener. 3. When 1-10V negative logic di mming mode and Dim+ is open, the driver will output minimum current. 10V PWM Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Inventronics LED Driver V-L N Vac Vprg PWM Signal Implementation 3: Positive logic Dim+ Dim- Inventronics LED Driver V-L N Vac Vprg PWM Signal Implementation 4: Negative logic
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 75W Programmable IP66/IP67 Driver ESM-075SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. When 10V PWM negative logic dimming mode and Dim+ is open, the driver will output minimum current. Time Dimming Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self Adapting- Percentage and Traditional Timer. Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two days (if difference <15 minutes), assuming that the center point of the dimming curve is midnight local time. Self Adapting-Percentage: Automatically adjusts the on-time of each step by a constant percentage = (actual on-time for the past 2 days if difference <15 min) / (programmed on-time from the dimming curve). Traditional Timer: Follows the programmed timing curve after power on with no changes. Output Lumen Compensation Output Lumen Compensation (OLC) may be used to maintain constant light output over the life of the LEDs by driving them at a reduced current when new, then gradually i ncreasing the drive current over time to counteract LED lumen degradation. End Of Life End-of-Life (EOL) is providing a visual notification to a user that the LED module has reached the end of manufacturer-specified life and that the replacement is recommended. Once active, an indication is given at each power-up of the driver, which the driver indicates this th rough a lower light output during the first 1 minute before normal operation is continued. Programming Connection Diagram Note: The driver does not need to be powered on during the programming process. Please refer to PRG-MUL2 (Programmer) datasheet for details.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 75W Programmable IP66/IP67 Driver ESM-075SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Mechanical Outline ESM-075SxxxDG Unspecified tolerance:±1 PROJ: OUTPUT(UL SJOW 17AWG/2C & VDE H05RN-F 2*1.0mm2 7.8) INPUT(UL SOOW 17AWG/3C & VDE H07RN-F 3*1.0mm2 9.8) DIMMING(UL21996 22AWG/3C 5.0) TcL (BRN) N (BLU) (YLW/GRN) Vprg (BLK/WHT) Dim+ (PUR) Dim- (PNK) V+ (BRN) V- (BLU) ESM-075SxxxDT Unspecified tolerance:±1 PROJ: OUTPUT(UL SJTW 18AWG/2C 7.3) INPUT(UL STW 18AWG/3C 9.5) Dimming Wire(UL21996 22AWG/3C 5.0) TcL1/L (BRN) L2/N(ORG/GRY) (YLW/GRN) V+ (RED) V- (BLU) Vprg (BLK/WHT) Dim+(PUR) Dim- (PNK) RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/ 863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 75W Programmable IP66/IP67 Driver ESM-075SxxxDx Rev.C www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2021-08-26 A Datasheets Release / / 2022-01-22 B UKCA logo / Added Safety &EMC Compliance UKCA Added Programming Connection Diagram ESM-075SxxxDT Updated Mechanical Outline ESM-075SxxxDT Updated 2023-06-20 C Product Photograph / Updated Safety &EMC Compliance / Updated Dimming / Updated Programming Connection Diagram / Updated Mechanical Outline / Updated