DS-ESD-320SXXXDV INVENTRONICS

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Features

Description

The ESD-320SxxxDV series is a 320W, constant-current, programmable LED driver that operates from 249-528 Vac input with excellent power factor. Created for many lighting applications including high bay, high mast, sports and roadway, it provides a dim-to-off mode with low standby power. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range (1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Power Factor Model Number 277Vac 480Vac 105-1500mA 1050-1500mA 1400 mA 249~528Vac 352~500Vdc 107~305Vdc 320 W 94.0% 0.96 0.95 ESD-320S150DV 154-2200mA 1540-2200mA 2100 mA 249~528Vac 352~500Vdc 73~208Vdc 320 W 94.5% 0.96 0.95 ESD-320S220DV 217-3100mA 2170-3100mA 2800 mA 249~528Vac 352~500Vdc 52~148Vdc 320 W 94.0% 0.96 0.95 ESD-320S310DV 308-4400mA 3080-4400mA 4200 mA 249~528Vac 352~500Vdc 37~104Vdc 320 W 94.0% 0.96 0.95 ESD-320S440DV 434-6200mA 4340-6200mA 4900 mA 249~528Vac 352~500Vdc 26 ~74Vdc 320 W 93.5% 0.96 0.95 ESD-320S620DV (4) Notes: (1) Output current range with constant power at 320W (2) Certified voltage range: 277-480Vac (3) Measured at 100% load and 480Vac input (see below “General Specifications” for details). (4) SELV Output

  • Ultra High Efficiency (Up to 94.5%)
  • Full Power at Wide Output Current Range (Constant Power)
  • 0-10V/PWM/3-Timer-Modes Dimmable
  • Dim-to-Off with Standby Power ≤1.5W
  • Output Lumen Compensation
  • Input Surge Protection: DM 4kV, CM 6kV
  • All-Around Protection: OVP, SCP, OTP
  • IP67
  • SELV Output
  • 5 Years Warranty

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com I-V Operating Area ESD-320S150DV ESD-320S220DV ESD-320S310DV ESD-320S440DV 100%Load 60%Load ESD-320S620DV

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications Parameter Min. Typ. Max. Notes Input AC Voltage 249 Vac - 528 Vac Input DC Voltage 352Vdc - 500Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.70 mA IIEC60598-1; 480Vac/ 60Hz; Grounding effectively. Input AC Current - - 1.5 A Measured at 100% load and 277 Vac input. - - 0.8 A Measured at 100% load and 480 Vac input. Inrush Current(I2t) - - 3.87 A 2s At 480Vac input, 25°C Cold Start, Duration=1.77 ms, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.90 - - At 277-480Vac, 50-60Hz, 60%-100% Load Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset 100% load Output Current Setting(Ioset) Range ESD-320S150DV ESD-320S220DV ESD-320S310DV ESD-320S440DV ESD-320S620DV 105 mA 154 mA 217 mA 308 mA 434 mA 1500 mA 2200 mA 3100 mA 4400 mA 6200 mA Output Current Setting Range with Constant Power ESD-320S150DV ESD-320S220DV ESD-320S310DV ESD-320S440DV ESD-320S620DV 1050 mA 1540 mA 2170 mA 3080 mA 4340 mA 1500 mA 2200 mA 3100 mA 4400 mA 6200 mA Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax 100% load, 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - 2%Iomax - 100% load. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10%Iomax 100% load No Load Output Voltage ESD-320S150DV ESD-320S220DV ESD-320S310DV ESD-320S440DV ESD-320S620DV 329V 223V 158V 121V 84V Line Regulation - - ±0.5% Measured at 100% load Load Regulation - - ±1.5% Turn-on Delay Time - 0.5 s 0.75 s Measured at 277Vac and 480Vac input, 60%-100% Load

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Output Specifications (Continued) Parameter Min. Typ. Max. Notes Temperature Coefficient of Ioset - 0.03%/°C - Case temperature = 0°C ~Tc max 12V Auxiliary Output Voltage 10.8 V 12 V 13.2 V 12V Auxiliary Output Source Current 0 mA - 200 mA Return terminal is “Dim −“ General Specifications Parameter Min. Typ. Max. Notes Efficiency at 277 Vac input: ESD-320S150DV Io=1050mA Io=1500mA ESD-320S220DV Io=1540mA Io=2200mA ESD-320S310DV Io=2170mA Io=3100mA ESD-320S440DV Io=3080mA Io=4400mA ESD-320S620DV Io=4340mA Io=6200mA 90.5% 89.5% 91.0% 90.0% 90.5% 90.0% 91.0% 90.0% 90.5% 89.5% 92.5% 91.5% 93.0% 92.0% 92.5% 92.0% 93.0% 92.0% 92.5% 91.5% Measured at 100% load and steady-state temperature in 25°C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 347 Vac input: ESD-320S150DV Io=1050mA Io=1500mA ESD-320S220DV Io=1540mA Io=2200mA ESD-320S310DV Io=2170mA Io=3100mA ESD-320S440DV Io=3080mA Io=4400mA ESD-320S620DV Io=4340mA Io=6200mA 91.5% 90.5% 92.0% 91.0% 91.5% 90.5% 91.5% 90.5% 91.0% 90.0% 93.5% 92.5% 94.0% 93.0% 93.5% 92.5% 93.5% 92.5% 93.0% 92.0% Measured at 100% load and steady-state temperature in 25°C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 480 Vac input: ESD-320S150DV Io=1050mA Io=1500mA ESD-320S220DV Io=1540mA Io=2200mA ESD-320S310DV Io=2170mA Io=3100mA ESD-320S440DV Io=3080mA Io=4400mA ESD-320S620DV Io=4340mA Io=6200mA 92.0% 91.0% 92.5% 91.5% 92.0% 91.0% 92.0% 91.0% 91.5% 90.5% 94.0% 93.0% 94.5% 93.5% 94.0% 93.0% 94.0% 93.0% 93.5% 92.5% Measured at 100% load and steady-state temperature in 25°C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.)

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes Standby power - - 1.5 W Measured at 480Vac/50Hz; Dimming off MTBF - 200,000 Hours - Measured at 480Vac input, 80%Load and 25°C ambient temperature (MIL-HDBK- 217F) Lifetime - 120,000 Hours - Measured at 480Vac input, 80%Load and 70°C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90 °C Operating Case Temperature for Warranty Tc_w -40°C - +75 °C Case temperature for 5 years warranty. Humidity: 10% RH to 95% RH; Storage Temperature -40°C - +85°C Humidity: 5% RH to 95% RH; Dimensions Inches (L × W × H) Millimeters (L × W × H) 9.21 × 3.86 × 1.76 234 × 98 × 44.8 With mounting ear 10.28× 3.86 × 1.76 261 × 98 × 44.8 Net Weight - 1935g - Dimming Specifications Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 200 uA 300 uA 450 uA Vdim(+) = 0 V Dimming Output Range ESD-320S150DV ESD-320S220DV ESD-320S310DV ESD-320S440DV ESD-320S620DV 10%Ioset - Ioset 1050mA ≤ Ioset ≤ 1500mA 1540mA ≤ Ioset ≤ 2200mA 2170mA ≤ Ioset ≤ 3100mA 3080mA ≤ Ioset ≤ 4400mA 4340mA ≤ Ioset ≤ 6200mA ESD-320S150DV ESD-320S220DV ESD-320S310DV ESD-320S440DV ESD-320S620DV 105 mA 154 mA 217 mA 308 mA 434 mA - Ioset 105mA ≤ Ioset ＜ 1050mA 154mA ≤ Ioset ＜ 1540mA 217mA ≤ Ioset ＜ 2170mA 308mA ≤ Ioset ＜ 3080mA 434mA ≤ Ioset ＜ 4340mA Recommended Dimming Input Range 0 V - 10 V Default 0-10V dimming mode. Dim off Voltage 0.4 V 0.55V 0.7 V Dim on Voltage 0.6 V 0.75 V 0.9 V Hysteresis - 0.2 V -

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dimming Specifications (Continued) Parameter Min. Typ. Max. Notes PWM_in High Level 3 V - 10 V Dimming mode set to PWM in PC interface. PWM_in Low Level -0.3 V - 0.6 V PWM_in Frequency Range 200 Hz - 3 KHz PWM_in Duty Cycle 1% - 99% PWM Dimming off (Positive Logic) 3% 5% 8% PWM Dimming on (Positive Logic) 5% 7% 10% PWM Dimming off ( Negative Logic) 92% 95% 97% PWM Dimming on ( Negative Logic) 90% 93% 95% Hysteresis - 2% - Safety & EMC Compliance Safety Category Standard ENEC & CE EN 61347-1, EN61347-2-13 EMI Standards Notes EN 55015(1) Conducted emission Test &Radiated emission Test EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker EMS Standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: Differential Mode 4 kV, Common Mode 6 kV (2) EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. (2) To perform electric strength (hi-pot) testing, the “GDT ground disconnect” (nut and metal lock sheet) on the driver end-cap should be removed temporarily to prevent the internal gas discharge tube from conducting (as allowed by IEC 60598-1 Clause 10.2). After testing is completed, these items must be reinstalled to restore line-to-earth surge protection and secure the end cap.

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Lifetime vs. Case Temperature Inrush Current Waveform Efficiency vs. Load ESD-320S150DV(Io=1050mA) ESD-320S150DV(Io=1500mA)

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESD-320S220DV(Io=1540mA) ESD-320S220DV(Io=2200mA) ESD-320S310DV(Io=2170mA) ESD-320S310DV(Io=3100mA) ESD-320S440DV(Io=3080mA) ESD-320S440DV(Io=4400mA)

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESD-320S620DV(Io=4340mA) ESD-320S620DV(Io=6200mA) Power Factor Total Harmonic Distortion

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Protection Functions Parameter Notes Over Temperature Protection Decreases output current, retu rning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Dimming  0-10V Dimming The recommended implementation of the dimming control is provided below. Implementation 1: DC Input Notes: 1. The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like zener. 2. Do NOT connect Dim − to the output V− or V+, otherwise the driver will not work properly.  PWM Dimming The recommended implementation of the dimming control is provided below. Implementation 2 : Positive logic

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Implementation 3: Negative logic Notes: 1. Do NOT connect Dim − to the output V− or V+, otherwise the driver will not work properly. 2. When PWM negative logic dimming mode and Dim+ is open, the driver will dim to off and be standby.  Time Dimming Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self Adapting- Percentage and Traditional Timer.

  • Self Adapting-Midnight : Automatically adjusts the dimming curve based on the on-time of past two days (if difference <15 minutes), assuming that the center point of the dimming curve is midnight local time.
  • Self Adapting-Percentage: Automatically adjusts the on-time of each step by a constant percentage = (actual on-time for the past 2 days if difference <15 min) / (programmed on-time from the dimming curve).
  • Traditional Timer: Follows the programmed timing curve after power on with no changes.  Output Lumen Compensation Output Lumen Compensation (OLC) may be used to maintain constant light output over the life of the LEDs by driving them at a reduced current when new, then gradually increasing the drive current over time to counteract LED lumen degradation.

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Programming Connection Diagram Note: The driver does not need to be powered on during the programming process.  Please refer to PRG-MUL2 (Programmer) datasheet for details. Mechanical Outline ESD-320S150DV PROJ: Unspecified toleranc:±1 V+(BROWN) V-(BLUE) BLACK/WHITE PURPLE GRAY AC INPUT(VDE H07RN-F 3*1.0mm2 9.0) DC OUTPUT(VDE H07RN-F 2*1.0mm2 8.4) AC/L(BROWN) AC/N(BLUE) GND (YELLOW/GREEN) DIMMING WIRE(H05RN-F 3*0.5mm2 6.3) Tc

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Others PROJ: Unspecified toleranc:±1 V+(BROWN) V-(BLUE) BLACK/WHITE PURPLE GRAY AC INPUT(VDE H07RN-F 3*1.0mm2 9.0) DC OUTPUT(VDE H05RN-F 2*1.0mm2 6.8) AC/L(BROWN) AC/N(BLUE) GND (YELLOW/GREEN) DIMMING WIRE(H05RN-F 3*0.5mm2 6.3) Tc RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. 320W Programmable IP67 Driver ESD-320SxxxDV Rev. B www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com

Revision History

Date Rev. Description of Change Item From To 2020-03-05 A Datasheets Release / / 2020-04-21 B Input Specifications Input AC Voltage Updated Input Specifications Input DC Voltage Added 0-10V Dimming Notes Updated PWM Dimming Notes Updated Mechanical Outline / Updated