DS-ESD-320SXXXDT INVENTRONICS

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 15

Technical content

Features

Description

The ESD-320SxxxDT series is a 320W, constant-current, programmable LED driver that operates from 249-528 Vac input with excellent power factor. Created for many lighting applications including high bay, high mast, sports and roadway, it provides a dim-to-off mode with low standby power. The high efficiency of these drivers and compact metal case enables them to run cooler, signific antly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range (1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Typical Power Factor Model Number 277Vac 480Vac 105-1500mA 1050-1500mA 1400 mA 249~528Vac 352~500Vdc 107~305Vdc 320 W 94.0% 0.96 0.95 ESD-320S150DT 154-2200mA 1540-2200mA 2100 mA 249~528Vac 352~500Vdc 73~208Vdc 320 W 94.5% 0.96 0.95 ESD-320S220DT 217-3100mA 2170-3100mA 2800 mA 249~528Vac 352~500Vdc 52~148Vdc 320 W 94.0% 0.96 0.95 ESD-320S310DT 308-4400mA 3080-4400mA 4200 mA 249~528Vac 352~500Vdc 37~104Vdc 320 W 94.0% 0.96 0.95 ESD-320S440DT 434-6200mA 4340-6200mA 4900 mA 249~528Vac 352~500Vdc 26 ~74Vdc 320 W 93.5% 0.96 0.95 ESD-320S620DT (4) Notes: (1) Output current range with constant power at 320W (2) Certified voltage range: 277-480Vac or 352-500Vdc (3) Measured at 100% load and 480Vac input (see below “General Specifications” for details). (4) SELV Output

  • Ultra High Efficiency (Up to 94.5%)
  • Full Power at Wide Output Current Range (Constant Power)
  • 0-10V/PWM/3-Timer-Modes Dimmable
  • Dim-to-Off with Standby Power ≤1.5W
  • Output Lumen Compensation
  • Input Surge Protection: DM 4kV, CM 6kV
  • All-Around Protection: OVP, SCP, OTP
  • IP67 and UL Dry / Damp / Wet Location
  • SELV Output
  • TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location
  • 5 Years Warranty

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H I-V Operating Area ESD-320S150DT ESD-320S220DT (630,305)(105,305) 120 180 240 300 360 0 300 600 900 1200 1500 1800 Output Voltage(V) Output Current (mA) (1050,305) (1500,213) 100%Load 60%Load (1500,128) (Ioset,320/Ioset)(10%Ioset,320/Ioset) Note: 1050mA≤Ioset≤1500mA Good Performance Area Allowed Operating Area Programmed Operating Area (924,208)(154,208) 120 160 200 240 0 450 900 1350 1800 2250 2700 Output Voltage(V) Output Current (mA) (1540,208) (2200,145.5) 100%Load 60%Load (2200,87) (10%Ioset,320/Ioset) Note: 1540mA≤Ioset≤2200mA (2200,73) (Ioset ,73)(220,73) Good Performance Area Allowed Operating Area Programmed Operating Area (Ioset,320/Ioset) ESD-320S310DT ESD-320S440DT 120 150 180 0 650 1300 1950 2600 3250 3900 Output Voltage(V) Output Current (mA) (2170,148) (3100,103)100%Load 60%Load (3100,62) Note: 2170mA≤Ioset≤3100mA (3100,52) (Ioset ,52)(310,52) Good Performance Area Allowed Operating Area Programmed Operating Area (Ioset,320/Ioset)(10%Ioset,320/Ioset) 100 120 0 900 1800 2700 3600 4500 5400 Output Voltage(V) Output Current (mA) (3080,104) (4400,72.5) 100%Load 60%Load (4400,43.5) (10%Ioset,320/Ioset) Note: 3080mA≤Ioset≤4400mA (4400,37) (Ioset,37)(440,37) Good Performance Area Allowed Operating Area Programmed Operating Area (Ioset,320/Ioset) ESD-320S620DT (2604,74)(434,74) 0 1300 2600 3900 5200 6500 7800 Output Voltage(V) Output Current (mA) (4340,74) (6200,51.5) 100%Load60%Load (6200,31) (10%Ioset,320/Ioset) Note: 4340mA≤Ioset≤6200mA (6200,26) (Ioset,26)(670,26) Good Performance Area Allowed Operating Area Programmed Operating Area (Ioset,320/Ioset)

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H Input Specifications Parameter Min. Typ. Max. Notes Input AC Voltage 249 Vac - 528 Vac Input DC Voltage 352 Vdc - 500 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL8750; 480Vac/ 60Hz; Grounding effectively. - - 0.70 mA IIEC60598-1; 480Vac/ 60Hz; Grounding effectively. Input AC Current - - 1.5 A Measured at 100% load and 277 Vac input. - - 0.8 A Measured at 100% load and 480 Vac input. Inrush Current(I2t) - - 3.87 A 2s At 480Vac input, 25°C Cold Start, Duration=1.77 ms, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.90 - - At 277-480Vac, 50-60Hz, 60%-100% Load Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset 100% load Output Current Setting(Ioset) Range ESD-320S150DT ESD-320S220DT ESD-320S310DT ESD-320S440DT ESD-320S620DT 105 mA 154 mA 217 mA 308 mA 434 mA 1500 mA 2200 mA 3100 mA 4400 mA 6200 mA Output Current Setting Range with Constant Power ESD-320S150DT ESD-320S220DT ESD-320S310DT ESD-320S440DT ESD-320S620DT 1050 mA 1540 mA 2170 mA 3080 mA 4340 mA 1500 mA 2200 mA 3100 mA 4400 mA 6200 mA Total Output Current Ripple (pk-pk) - 5%Iomax 10%Iomax 100% load, 20 MHz BW Output Current Ripple at < 200 Hz (pk-pk) - 2%Iomax - 100% load. Only this component of ripple is associated with visible flicker. Startup Overshoot Current - - 10%Iomax 100% load No Load Output Voltage ESD-320S150DT ESD-320S220DT ESD-320S310DT ESD-320S440DT ESD-320S620DT 329V 223V 158V 121V 84V Line Regulation - - ±0.5% Measured at 100% load

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H Output Specifications (Continued) Parameter Min. Typ. Max. Notes Load Regulation - - ±1.5% Turn-on Delay Time - 0.5 s 0.75 s Measured at 277Vac and 480Vac input, 60%-100% Load Temperature Coefficient of Ioset - 0.03%/°C - Case temperature = 0°C ~Tc max 12V Auxiliary Output Voltage 10.8 V 12 V 13.2 V 12V Auxiliary Output Source Current 0 mA - 200 mA Return terminal is “Dim −“ General Specifications Parameter Min. Typ. Max. Notes Efficiency at 277 Vac input: ESD-320S150DT Io=1050mA Io=1500mA ESD-320S220DT Io=1540mA Io=2200mA ESD-320S310DT Io=2170mA Io=3100mA ESD-320S440DT Io=3080mA Io=4400mA ESD-320S620DT Io=4340mA Io=6200mA 90.5% 89.5% 91.0% 90.0% 90.5% 90.0% 91.0% 90.0% 90.5% 89.5% 92.5% 91.5% 93.0% 92.0% 92.5% 92.0% 93.0% 92.0% 92.5% 91.5% Measured at 100% load and steady-state temperature in 25°C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 347 Vac input: ESD-320S150DT Io=1050mA Io=1500mA ESD-320S220DT Io=1540mA Io=2200mA ESD-320S310DT Io=2170mA Io=3100mA ESD-320S440DT Io=3080mA Io=4400mA ESD-320S620DT Io=4340mA Io=6200mA 91.5% 90.5% 92.0% 91.0% 91.5% 90.5% 91.5% 90.5% 91.0% 90.0% 93.5% 92.5% 94.0% 93.0% 93.5% 92.5% 93.5% 92.5% 93.0% 92.0% Measured at 100% load and steady-state temperature in 25°C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.)

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H General Specifications (Continued) Parameter Min. Typ. Max. Notes Efficiency at 480 Vac input: ESD-320S150DT Io=1050mA Io=1500mA ESD-320S220DT Io=1540mA Io=2200mA ESD-320S310DT Io=2170mA Io=3100mA ESD-320S440DT Io=3080mA Io=4400mA ESD-320S620DT Io=4340mA Io=6200mA 92.0% 91.0% 92.5% 91.5% 92.0% 91.0% 92.0% 91.0% 91.5% 90.5% 94.0% 93.0% 94.5% 93.5% 94.0% 93.0% 94.0% 93.0% 93.5% 92.5% Measured at 100% load and steady-state temperature in 25°C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Standby power - - 1.5 W Measured at 480Vac/50Hz; Dimming off MTBF - 200,000 Hours - Measured at 480Vac input, 80%Load and 25°C ambient temperature (MIL-HDBK- 217F) Lifetime - 120,000 Hours - Measured at 480Vac input, 80%Load and 70°C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +87 °C Operating Case Temperature for Warranty Tc_w -40°C - +75 °C Case temperature for 5 years warranty Humidity: 10% RH to 95% RH Storage Temperature -40°C - +85°C Humidity: 5%RH to 95%RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 9.21 × 3.86 × 1.76 234 × 98 × 44.8 With mounting ear 10.28× 3.86 × 1.76 261 × 98 × 44.8 Net Weight - 1935g - Dimming Specifications Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 200 uA 300 uA 450 uA Vdim(+) = 0 V Dimming Output Range ESD-320S150DT ESD-320S220DT ESD-320S310DT ESD-320S440DT ESD-320S620DT 10%Ioset - Ioset 1050mA ≤ Ioset ≤ 1500mA 1540mA ≤ Ioset ≤ 2200mA 2170mA ≤ Ioset ≤ 3100mA 3080mA ≤ Ioset ≤ 4400mA 4340mA ≤ Ioset ≤ 6200mA ESD-320S150DT ESD-320S220DT ESD-320S310DT ESD-320S440DT ESD-320S620DT 105 mA 154 mA 217 mA 308 mA 434 mA - Ioset 105mA ≤ Ioset ＜ 1050mA 154mA ≤ Ioset ＜ 1540mA 217mA ≤ Ioset ＜ 2170mA 308mA ≤ Ioset ＜ 3080mA 434mA ≤ Ioset ＜ 4340mA

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H Dimming Specifications (Continued) Parameter Min. Typ. Max. Notes Recommended Dimming Input Range 0 V - 10 V Default 0-10V dimming mode. Dim off Voltage 0.4 V 0.55V 0.7 V Dim on Voltage 0.6 V 0.75 V 0.9 V Hysteresis - 0.2 V - PWM_in High Level 3 V - 10 V Dimming mode set to PWM in PC interface. PWM_in Low Level -0.3 V - 0.6 V PWM_in Frequency Range 200 Hz - 3 KHz PWM_in Duty Cycle 1% - 99% PWM Dimming off (Positive Logic) 3% 5% 8% PWM Dimming on (Positive Logic) 5% 7% 10% PWM Dimming off ( Negative Logic) 92% 95% 97% PWM Dimming on ( Negative Logic) 90% 93% 95% Hysteresis - 2% - Safety & EMC Compliance Safety Category Standard UL/CUL UL8750,CAN/CSA-C22.2 No. 250.13 CE EN 61347-1, EN 61347-2-13 EAC ГОСТ Р МЭК 61347-1, ГОСТ IEC 61347-2-13 EMI Standards Notes EN 55015(1) Conducted emission Test &Radiated emission Test EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker FCC Part15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interference, and [2] this device must accept any interference received, including interference that may cause undesired operation. EMS Standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H Safety & EMC Compliance (Continued) EMS Standards Notes EN 61000-4-5 Surge Immunity Test: AC Power Li ne: Differential Mode 4 kV, Common Mode 6 kV (2) EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. (2) To perform electric strength (hi-pot) testing, the “GDT ground disconnect” (nut and metal lock sheet) on the driver end-cap should be removed temporarily to prevent the internal gas discharge tube from conducting (as allowed by IEC 60598-1 Clause 10.2). After testing is completed, these items must be reinstalled to restore line-to-earth surge protection and secure the end cap. Lifetime vs. Case Temperature

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H Inrush Current Waveform Efficiency vs. Load ESD-320S150DT(Io=1050mA) ESD-320S150DT(Io=1500mA) ESD-320S220DT(Io=1540mA) ESD-320S220DT(Io=2200mA)

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H ESD-320S310DT(Io=2170mA) ESD-320S310DT(Io=3100mA) ESD-320S440DT(Io=3080mA) ESD-320S440DT(Io=4400mA) ESD-320S620DT(Io=4340mA) ESD-320S620DT(Io=6200mA)

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H Power Factor Total Harmonic Distortion Protection Functions Parameter Notes Over Temperature Protection Decreases output current, retu rning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Dimming  0-10V Dimming The recommended implementation of the dimming control is provided below.

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H Dim+ Dim- Dimmer Inventronics LED Driver V-L N G Vac Vaux Implementation 1: DC Input Notes: 1. Do NOT connect Dim − to the output V− or V+, otherwise the driver will not work properly. 2. The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like zener.  PWM Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Inventronics LED Driver L G Vaux N Vac PWM Signal Implementation 2: Positive logic Dim+ Dim- Inventronics LED Driver L G Vaux N Vac PWM Signal Implementation 3: Negative logic Notes: 1. Do NOT connect Dim − to the output V− or V+, otherwise the driver will not work properly. 2. When PWM negative logic dimming mode and Dim+ is open, the driver will dim to off and be standby.

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H  Time Dimming Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self Adapting- Percentage and Traditional Timer.

  • Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two days (if difference <15 minutes), assuming that the center point of the dimming curve is midnight local time.
  • Self Adapting-Percentage: Automatically adjusts the on-time of each step by a constant percentage = (actual on-time for the past 2 days if difference <15 min) / (programmed on-time from the dimming curve).
  • Traditional Timer: Follows the programmed timing curve after power on with no changes.  Output Lumen Compensation Output Lumen Compensation (OLC) may be used to maintain constant light output over the life of the LEDs by driving them at a reduced current when new, then gradually increasing the drive current over time to counteract LED lumen degradation. Programming Connection Diagram Note: The driver does not need to be powered on during the programming process.  Please refer to PRG-MUL2 (Programmer) datasheet for details.

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H Mechanical Outline ESD-320S150DT PROJ: Unspecified tolerance:±1 AC/L (BLACK) AC/N (WHITE) GND (GREEN) PURPLE PINK BLACK/WHITE V+ (RED) V- (BLUE) INPUT(UL STW 3*18AWG 9.5) OUTPUT (UL STW 2*18AWG 8.9) DIMMING WIRE(UL21996 3*22AWG 5.0) Tc Other Models PROJ: Unspecified tolerance:±1 AC/L (BLACK) AC/N (WHITE) GND (GREEN) PURPLE PINK BLACK/WHITE V+ (RED) V- (BLUE) INPUT(UL STW 3*18AWG 9.5) OUTPUT (UL SJTW 2*18AWG 7.3) DIMMING WIRE(UL21996 3*22AWG 5.0) Tc RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H

Revision History

Date Rev. Description of Change Item From To 2015-01-14 A Datasheets Release / / 2015-03-09 B Features Input Surge Protection: 4kV line- line, 6kV line-earth Added Model: ESD-320S150DT / Added Output Current Ripple(pk-pk) Output Current Ripple(pk-pk) Total Output Current Ripple (pk-pk) Output Current Ripple at < 200 Hz (pk- pk) / Added Operating Case Temperature for Safety Tc_s / Updated Operating Case Temperature for Warranty Tc_w / Updated General Specifications Storage Temperature Added Environmental Specifications / Delete Derating / Delete 2016-01-28 C Features / Updated General Specifications Net Weight Updated Lifetime vs. Case Temperature / Updated Time Dimming / Updated Output Lumen Compensation / Added Programming Connection Diagram / Updated 2017-08-03 D Input Specifications PF/THD Updated Output Specifications Turn-on Delay Time Updated Output Specifications Temperature Coefficient of Ioset Updated General Specifications With mounting ear Added Safety & EMC Compliance / Updated Mechanical Outline / Updated 2017-11-23 E Features 5 Years Warranty Updated Output Specifications Turn-on Delay Time Updated General Specifications Lifetime Updated General Specifications Operating Case Temperature for Warranty Tc_w Updated Lifetime vs. Case Temperature / Updated

Specifications are subject to changes without notice. All specifications are typical at 25°C unless otherwise stated. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 320W Programmable IP67 Driver ESD-320SxxxDT Rev. H Revision History (Continued) Change Date Rev. Description of Change Item From To 2018-11-28 F CE / Added Features / Updated Models / Updated I-V Operating Area / Updated Input Specifications Leakage Current Updated Output Specifications Output Current Setting(Ioset) Range Updated Output Specifications Output Current Setting Range with Constant Power Updated Output Specifications Turn-on Delay Time Updated General Specifications Dimensions Updated General Specifications Net Weight Updated Dimming Specifications Dimming Output Range Updated Safety & EMC Compliance / Updated Programming Connection Diagram / Updated Mechanical Outline / Updated 2019-02-27 G EAC / Added Safety & EMC Compliance / Updated Efficiency vs. Load ESD-320S660DT ESD- 320S620DT 2022-03-10 H Features / Updated General Specifications Humidity: Updated Safety & EMC Compliance / Updated Dimming / Updated Programming Connection Diagram / Updated Mechanical Outline / Updated RoHS Compliance / Updated