DS-ESD-240SXXXDT INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
Features
Description
The ESD-240SxxxDT series is a 240W, constant-current, programmable LED driver th at operates from 249-528 Vac input with excellent power factor. Created for many lighting applications including high bay, high mast, sports and roadway, it provides a dim-to-off mode with low standby pow er. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly im proving reliability and extending product life. To ensure trouble-free operation, protection is provided against over voltage, short circuit, and over temperature. Models Adjustable Output Current Range Full-Power Current Range (1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Typical Power Factor Model Number 277Vac 480Vac 70-1000mA 700-1000mA 700 mA 249~528 Vac 352~500 Vdc 120~343Vdc 240 W 94.0% 0.96 0.95 ESD-240S100DT 105-1500mA 1050-1500mA 1400 mA 249~528 Vac 352~500 Vdc 80~229Vdc 240 W 93.5% 0.96 0.95 ESD-240S150DT 154-2200mA 1540-2200mA 2100 mA 249~528 Vac 352~500 Vdc 55~156Vdc 240 W 93.0% 0.96 0.95 ESD-240S220DT 224-3200mA 2240-3200mA 2800 mA 249~528 Vac 352~500 Vdc 38~107Vdc 240 W 93.0% 0.96 0.95 ESD-240S320DT (4) 322-4600mA 3220-4600mA 4200 mA 249~528 Vac 352~500 Vdc 27~75Vdc 240 W 93.0% 0.96 0.95 ESD-240S460DT (4) 462-6600mA 4620-6600mA 4900 mA 249~528 Vac 352~500 Vdc 19~52Vdc 240 W 92.5% 0.96 0.95 ESD-240S660DT (4) Notes: (1) Output current range with constant power at 240W (2) Certified voltage range: 277-480Vac or 352-500Vdc (3) Measured at 100% load and 480Vac input (see below “General Specifications” for details). (4) SELV Output Ultra High Efficiency (Up to 94%) Full Power at Wide Output Cur rent Range (Constant Power) 0-10V/PWM/Timer Dimmable Dim-to-Off with Standby Power ≤ 1.5 W Input Surge Protection: DM 4kV, CM 6kV All-Around Protection: OVP, SCP, OTP IP67 and UL Dry / Damp / Wet Location SELV Output TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location 5 Years Warranty
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com I-V Operating Area ESD-240S100DT ESD-240S150DT (420,343)(70,343) 140 210 280 350 420 0 200 400 600 800 1000 1200 Output Voltage(V) Output Current (mA) (700,343) (1000,240) 100%Load 60%Load (1000,144) (Ioset,240/Ioset)(10%Ioset,240/Ioset) Note: 700mA≤Ioset≤1000mA Good Performance Area Allowed Operating Area Programmed Operating Area (630,229)(105,229) 135 180 225 270 0 300 600 900 1200 1500 1800 Output Voltage(V) Output Current (mA) (1050,229) (1500,160) 100%Load60%Load (1500,96) (Ioset,240/Ioset)(10%Ioset,240/Ioset) Note: 1050mA≤Ioset≤1500mA (1500,80) (Ioset,80)(150,80) Good Performance Area Allowed Operating Area Programmed Operating Area ESD-240S220DT ESD-240S320DT (924,156)(154,156) 120 150 180 0 450 900 1350 1800 2250 2700 Output Voltage(V) Output Current (mA) (1540,156) (2200,109) 100%Load 60%Load (2200,65.5) (10%Ioset,240/Ioset) Note: 1540mA≤Ioset≤2200mA (2200,55) (Ioset,55)(220,55) Good Performance Area Allowed Operating Area Programmed Operating Area (Ioset,240/Ioset) 100 120 0 650 1300 1950 2600 3250 3900 Output Voltage(V) Output Current (mA) (2240,107) (3200,75) 100%Load 60%Load (3200,45) Note: 2240mA≤Ioset≤3200mA (3200,38) (Ioset,38)(320,38) Good Performance Area Allowed Operating Area Programmed Operating Area (Ioset,240/Ioset)(10%Ioset,240/Ioset) ESD-240S460DT ESD-240S660DT (1932,75)(322,75) 0 900 1800 2700 3600 4500 5400 Output Voltage(V) Output Current (mA) (3220,75) (4600,52) 100%Load 60%Load (4600,31.5) (10%Ioset,240/Ioset) Note: 3220mA≤Ioset≤4600mA (4600,27) (Ioset ,27)(460,27) Good Performance Area Allowed Operating Area Programmed Operating Area (Ioset,240/Ioset) (2772,52)(462,52) 0 1350 2700 4050 5400 6750 8100 Output Voltage(V) Output Current (mA) (4620,52) (6600,36.5) 100%Load 60%Load (6600,22) (10%Ioset,240/Ioset) Note: 4620mA≤Ioset≤6600mA (6600,19) (Ioset,19)(660,19) Good Performance Area Allowed Operating Area Programmed Operating Area (Ioset,240/Ioset)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Input Specifications Parameter Min. Typ. Max. Notes Input AC Voltage 249 Vac - 528 Vac Input DC Voltage 352 Vdc - 500 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL8750; 480Vac/ 60Hz - - 0.70 mA IEC60598-1; 480Vac/ 60Hz Input AC Current - - 1.1 A Measured at 100% load and 277 Vac input. - - 0.6 A Measured at 100% load and 480 Vac input. Inrush Current(I2t) - - 2.9 A 2s At 480Vac input, 25C Cold Start, Duration=1.43 ms, 10%Ipk-10%Ipk. See Inrush Current Waveform for the details. PF 0.90 - - At 277-480Vac, 50-60Hz, 60%-100% Load (144-240W) THD - - 20% Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5%Ioset - 5%Ioset 100% load Output Current Setting(Ioset) Range ESD-240S100DT ESD-240S150DT ESD-240S220DT ESD-240S320DT ESD-240S460DT ESD-240S660DT 70 mA 105 mA 154 mA 224 mA 322 mA 462 mA 1000 mA 1500 mA 2200 mA 3200 mA 4600 mA 6600 mA Output Current Setting Range with Constant Power ESD-240S100DT ESD-240S150DT ESD-240S220DT ESD-240S320DT ESD-240S460DT ESD-240S660DT 700 mA 1050 mA 1540 mA 2240 mA 3220 mA 4620 mA 1000 mA 1500 mA 2200 mA 3200 mA 4600 mA 6600 mA Output Current Ripple(pk-pk) - 5%Iomax 10%Iomax 100% load Startup Overshoot Current - - 10%Iomax 100% load No Load Output Voltage ESD-240S100DT ESD-240S150DT ESD-240S220DT ESD-240S320DT ESD-240S460DT ESD-240S660DT 355 V 248 V 170 V 120 V 90 V 60 V Line Regulation - - ±0.5% Measured at 100% load Load Regulation - - ±1.5%
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Output Specifications (Continued) Parameter Min. Typ. Max. Notes Turn-on Delay Time - 0.5 s 0.75 s Measured at 277Vac and 480Vac input, 60%-100% Load Temperature Coefficient of Ioset - 0.03%/C - Case temperature = 0C ~Tc max 12V Auxiliary Output Voltage 10.8 V 12 V 13.2 V 12V Auxiliary Output Source Current 0 mA - 200 mA Return terminal is “Dim−“ General Specifications Parameter Min. Typ. Max. Notes Efficiency at 277 Vac input: ESD-240S100DT Io= 700mA Io=1000mA ESD-240S150DT Io=1050mA Io=1500mA ESD-240S220DT Io=1540mA Io=2200mA ESD-240S320DT Io=2240mA Io=3200mA ESD-240S460DT Io=3220mA Io=4600mA ESD-240S660DT Io=4620mA Io=6600mA 90.0% 89.5% 90.0% 89.0% 89.5% 89.5% 89.5% 88.5% 89.5% 88.0% 89.0% 88.0% 92.0% 91.5% 92.0% 91.0% 91.5% 91.5% 91.5% 90.5% 91.5% 90.0% 91.0% 90.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Efficiency at 347 Vac input: ESD-240S100DT Io= 700mA Io=1000mA ESD-240S150DT Io=1050mA Io=1500mA ESD-240S220DT Io=1540mA Io=2200mA ESD-240S320DT Io=2240mA Io=3200mA ESD-240S460DT Io=3220mA Io=4600mA ESD-240S660DT Io=4620mA Io=6600mA 91.0% 90.5% 91.0% 90.0% 90.0% 90.0% 90.0% 89.5% 90.0% 89.0% 90.0% 89.0% 93.0% 92.5% 93.0% 92.0% 92.0% 92.0% 92.0% 91.5% 92.0% 91.0% 92.0% 91.0% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com General Specifications (Continued) Parameter Min. Typ. Max. Notes Efficiency at 480 Vac input: ESD-240S100DT Io= 700mA Io=1000mA ESD-240S150DT Io=1050mA Io=1500mA ESD-240S220DT Io=1540mA Io=2200mA ESD-240S320DT Io=2240mA Io=3200mA ESD-240S460DT Io=3220mA Io=4600mA ESD-240S660DT Io=4620mA Io=6600mA 92.0% 91.0% 91.5% 91.5% 91.0% 91.0% 91.0% 90.0% 91.0% 89.5% 90.5% 89.5% 94.0% 93.0% 93.5% 93.5% 93.0% 93.0% 93.0% 92.0% 93.0% 91.5% 92.5% 91.5% Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Standby power - - 1.5 W Measur ed at 480Vac/50Hz; Dimming off MTBF - 209,000 Hours - Measured at 480Vac input, 80%Load and 25C ambient temperature (MIL-HDBK- 217F) Lifetime - 114,000 Hours - Measured at 480Vac input, 80%Load and 70C case temperature; See lifetime vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40C - +89 C Operating Case Temperature for Warranty Tc_w -40°C - +75°C Case temperature for 5 years warranty Humidity: 10% RH to 95% RH Storage Temperature -40°C - +8 5°C Humidity: 5% RH to 95% RH Dimensions Inches (L × W × H) Millimeters (L × W × H) 9.49 × 2.66 × 1.56 241 × 67.5 × 39.7 With mounting ear 262 × 67.5 × 39.7 Net Weight - 1400 g - Dimming Specifications Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 2 00 uA 300 uA 450 uA Vdim(+) = 0 V Dimming Output Range ESD-240S100DT ESD-240S150DT ESD-240S220DT ESD-240S320DT ESD-240S460DT ESD-240S660DT 10%Ioset - Ioset 700mA ≤ Ioset ≤ 1000mA 1050mA ≤ Ioset ≤ 1500mA 1540mA ≤ Ioset ≤ 2200mA 2240mA ≤ Ioset ≤ 3200mA 3220mA ≤ Ioset ≤ 4600mA 4620mA ≤ Ioset ≤ 6600mA
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dimming Specifications (Continued) Safety & EMC Compliance Safety Category Standard UL/CUL UL8750,CAN/CSA-C22.2 No. 250.13 CE EN 61347-1, EN 61347-2-13 EMI Standards Notes EN 55015(1) Conducted emission Test & Radiated emission Test EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker FCC Part 15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interfere nce, and (2) this device must accept any interference received, including interference that may cause undesired Operation. Parameter Min. Typ. Max. Notes Dimming Output Range ESD-240S100DT ESD-240S150DT ESD-240S220DT ESD-240S320DT ESD-240S460DT ESD-240S660DT 70 mA 105 mA 154 mA 224 mA 322 mA 462 mA - Ioset 70mA ≤ Ioset ＜ 700mA 105mA ≤ Ioset ＜ 1050mA 154mA ≤ Ioset ＜ 1540mA 224mA ≤ Ioset ＜ 2240mA 322mA ≤ Ioset ＜ 3220mA 462mA ≤ Ioset ＜ 4620mA Recommended Dimming Input Range 0 V - 10 V Default 0-10V dimming mode. Dim off Voltage 0.2 V 0.4 V 0.6 V Dim on Voltage 0.4 V 0.6 V 0.8 V H y s t e r e s i s - 0 . 2 V - PWM_in High Level 3 V - 10 V Dimming mode set to PWM in PC interface. PWM_in Low Level -0.3 V - 0.6 V PWM_in Frequency Range 200 Hz - 3 KHz PWM_in Duty Cycle 1% - 99% PWM Dimming off (Positive Logic) 2% 4% 7% PWM Dimming on (Positive Logic) 4% 6% 9% PWM Dimming off ( Negative Logic) 93% 96% 98% PWM Dimming on ( Negative Logic) 91% 94% 96% Hysteresis - 2% -
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Safety & EMC Compliance (Continued) EMS Standards Notes EN 61000-4-2 Electrostatic Disch arge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Elect romagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: Differential Mode 4 kV, Common Mode 6 kV (2) EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Light ing Equipment Notes: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. (2) To perform electric strength (hi-pot) testing, the “GDT gro und disconnect” (nut and metal lock sheet) on the driver end-cap should be removed temporarily to prevent the internal gas discharge tube from conducting (as allowed by IEC 60598-1 Clause 10.2). After testing is completed , these items must be reinstalled to restore line-to-earth surge protection and secure the end cap. Lifetime vs. Case Temperature
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Inrush Current Waveform Efficiency vs. Load ESD-240S100DT(Io=700mA) ESD-240S100DT(Io=1000mA) ESD-240S150DT(Io=1050mA) ESD-240S150DT(Io=1500mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESD-240S220DT(Io=1540mA) ESD-240S220DT(Io=2200mA) ESD-240S320DT(Io=2240mA) ESD-240S320DT(Io=3200mA) ESD-240S460DT(Io=3220mA) ESD-240S460DT(Io=4600mA)
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com ESD-240S660DT(Io=4620mA) ESD-240S660DT(Io=6600mA) Power Factor Total Harmonic Distortion
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Protection Functions Parameter Notes Over Temperature Protection Decreases output current, returning to normal after over temperature is removed. Short Circuit Protection Auto Recovery. No damage will occur when any output is short ci rcuited. The output shall return to normal when the fault condition is removed. Over Voltage Protection Limits output voltage at no load and in case the normal voltage limit fails. Dimming 0-10V Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Dimmer Inventronics LED Driver L VauxN G Vac Implementation 1: DC Input Notes: 1. Do NOT connect Dim− to the o utput V− or V+, otherwise the driver will not work properly. 2. The dimmer can also be replaced by an active 0-10V voltage s ource signal or passive components like zener. PWM Dimming The recommended implementation of the dimming control is provided below. Dim+ Dim- Inventronics LED Driver L G Vaux N Vac PWM Signal Implementation 2: Positive logic
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Dim+ Dim- Inventronics LED Driver L G Vaux N Vac PWM Signal Implementation 3: Negative logic Notes: 1. Do NOT connect Dim− to the output V− or V+, otherwise the dr iver will not work properly. 2. When PWM negative logic dimming mode and Dim+ is open, the d river will dim to off and be standby. Time Dimming Set the timing curve by pulling the sliders.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Programming Connection Diagram Note: The driver does not need to be powered on during the programming process. Please refer to PRG-MUL2 (Programmer) datasheet for details. Mechanical Outline ESD-240S100DT AC/L (BLACK) AC/N (WHITE) GND (GREEN) INPUT(UL STW 3*18AWG 9.5) V+ (RED) V- (BLUE) OUTPUT(UL STW 2*18AWG 8.9) BLACK/WHITE PURPLE PINK DIMMING WIRE (UL 21996 3*22AWG 5.0) PROJ: Unspecified tolerance:±1 Tc
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Other Models AC/L (BLACK) AC/N (WHITE) GND (GREEN) INPUT(UL STW 3*18AWG 9.5) V+ (RED) V- (BLUE) OUTPUT(UL SJTW 2*18AWG 7.3) BLACK/WHITE PURPLE PINK DIMMING WIRE (UL 21996 3*22AWG 5.0) PROJ: Unspecified tolerance:±1 Tc RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/ 863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products.
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com
Revision History
Date Rev. Description of Change Item From To 2014-09-10 A Datasheets Release / / 2016-5-30 B General Specifications Case Temperature Operating Case T emperature for Safety General Specifications Operating Case Temperature for Warranty Tc_w Added General Specifications Storage Temperature Added General Specifications With mounting ear Added General Specifications Net Weight Added Environmental Specifications / Deleted Safety &EMC Compliance Notes Added Programming Connection Diagram / Updated Mechanical Outline / Updated 2017-11-21 C Features 5 Years Warranty Updated Input AC Current / Updated Input Specifications Leakage Current Updated Input Specifications Inrush Current(I2t) Updated Input Specifications PF/THD(Note) Updated Output Specifications Turn-on Delay Time Updated Output Specifications Temperature Coefficient of Ioset Updated General Specifications Lifetime Updated General Specifications Operating Case Temperature for Warranty Tc_w Updated Safety &EMC Compliance / Updated Lifetime vs. Case Temperature / Updated Mechanical Outline / Updated 2018-04-26 D UL / Updated Description / Updated 2018-11-28 E CE / Added Features / Updated
Specifications are subject to changes without notice. All specifications are typical at 25C unless otherwise stated. 240W Programmable IP67 Driver ESD-240SxxxDT Rev. F www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com Revision History (Continued) Change Date Rev. Description of Change Item From To 2018-11-28 E Models / Updated I-V Operating Area / Updated Input Specifications Leakage Current Updated Output Specifications Output Current Setting(Ioset) Range Updated Output Specifications Output Current Setting Range with Constant Power Updated Output Specifications Turn-on Delay Time Updated General Specifications Dimensions Updated Dimming Specifications Dimming Output Range Updated Safety & EMC Compliance / Updated Derating / Deleted Mechanical Outline / Updated 2022-02-18 F Product Photograph / Updated Features / Updated Safety & EMC Compliance / Updated Mechanical Outline / Updated